Melola Discovery

← Melola Discovery

Journal

PERENCANAAN POROS MESIN PEMISAH KULIT DAN BIJI KACANG HIJAU

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 4 (2018)

DOI
10.55679/enthalpy.v3i4.5317
ISSN
2502-8944
Published
2018-12-28
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

This research aims to determine the shaft planning that is safe and good, the moment of twisting or torque, the diameter of the shaft. In this study designed using Autodesk Inventor 2017. Software The material used toplan the shaft is carbon steel for the construction of the machine and rod steel which is cold machined for the shaft with the symbol S55C with a tensile strength of 66 kg/mm2.The results of shaft planning calculationsshow that the power plan is 7.165 kw, moment of torsion or torque with shaft rotation n1 (3600 rpm) of 1,938,530 kg. mm, and for shaft rotation n2 (960 rpm) of 7,269.4489 kg.mm, and the shear stress allowed is5.5 (kg/mm2), and the shaft diameter obtained a value of 28 mm, while the shear stress obtained a value of 1.688 kg/mm2. From the results above it can be seen that the value of shear stress that occurs is smaller than the shear stress value of the permit (􀄲 􀄲􀄮) where 􀄲􀄮 = 5.5 kg/mm and the value of 􀄲 = 1.688 kg/mm2, so that it can be concluded that the size The planned shaft is safe enough.Keywords: Shaft design, safe and good shaft, torque or torque moment, shaft diameter.

Collaboration network of the authors

40 authors · 213 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Lukas Kano MangallaUniversitas Halu Oleo13
Yuspian GunawanAffiliation unknown10
Kadir KadirUniversitas Halu Oleo9
Salimin SaliminAffiliation unknown9
Prinob AksarUniversitas Halu Oleo9
Aminur AminurAffiliation unknown6
Al Ichlas ImranAffiliation unknown5
La HasanuddinAffiliation unknown4
La HasanudinUniversitas Halu Oleo4
Sudarsono SudarsonoAffiliation unknown4
Jaka Seru Dwi SaputraAffiliation unknown4
Ridway BalakaAffiliation unknown3
La Ode Ahmad BarataAffiliation unknown3
R BalakaAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
Jaka Seru Dwi SaputraAffiliation unknown2
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
La Ode MagribiAffiliation unknown1
Nasrul NasrulAffiliation unknown1
La KarimunaAffiliation unknown1
Abd KadirAffiliation unknown1
Luther PagillingAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Agustinus LolokAffiliation unknown1
Abd KadirAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Asad SyahdanAffiliation unknown1
Abd kadirAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Abd KadirAffiliation unknown1
Asar AsarAffiliation unknown1
Muhammad HasbiAffiliation unknown1
Esparuling EsparulingAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PERENCANAAN POROS MESIN PEMISAH KULIT DAN BIJI KACANG HIJAU</dc:title>
	<dc:creator>Andri, Muh.</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:description xml:lang="en-US">This research aims to determine the shaft planning that is safe and good, the moment of twisting or torque, the diameter of the shaft. In this study designed using Autodesk Inventor 2017. Software The material used toplan the shaft is carbon steel for the construction of the machine and rod steel which is cold machined for the shaft with the symbol S55C with a tensile strength of 66 kg/mm2.The results of shaft planning calculationsshow that the power plan is 7.165 kw, moment of torsion or torque with shaft rotation n1 (3600 rpm) of 1,938,530 kg. mm, and for shaft rotation n2 (960 rpm) of 7,269.4489 kg.mm, and the shear stress allowed is5.5 (kg/mm2), and the shaft diameter obtained a value of 28 mm, while the shear stress obtained a value of 1.688 kg/mm2. From the results above it can be seen that the value of shear stress that occurs is smaller than the shear stress value of the permit (􀄲  􀄲􀄮) where 􀄲􀄮 = 5.5 kg/mm and the value of 􀄲 = 1.688 kg/mm2, so that it can be concluded that the size The planned shaft is safe enough.Keywords: Shaft design, safe and good shaft, torque or torque moment, shaft diameter.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5317</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i4.5317</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 4 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5317/3959</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>