Melola Discovery

← Melola Discovery

Journal No SINTA rank

PERANCANGAN DAN VALIDASI DESAIN ALAT PENUKAR KALOR TIPE SHELL AND TUBE MENGGUNAKAN COMPUTATIONAL FLUID DYNAMICS

Dinamika : Jurnal Ilmiah Teknik Mesin · Vol. 8 No. 2 (2017) · pp. 39–46

DOI
10.33772/djitm.v8i2.2407
ISSN
2502-3373, 2085-8817
Published
2017-06-14
Publisher
Jurusan Teknik Mesin, Universitas Halu Oleo
Language
eng

Abstract

In this study will be analyzed on a heat exchanger shell and tube type by using CFD (Computational Fluids Dynamic) and analytic calculations. The results of the analysis will be compared later searched the differences and similarities that can be seen the effect that makes a difference or similarity of the analysis results. Analysis using Computational Fluid Dynamics (CFD) includes the manufacture of the model, determining boundary condition, the manufacture of mesh, material data input, then the iteration process. After the iterative process, we will get the results in a visual form by using a color scale. Analysis manual calculation performed after all the data is collected and then put into the calculation formula. The results of both analyzes are the difference in temperature that comes out of the shell of 1.84 0F. The difference is due to the difference in the CFD analysis results visually using a color scale that is not an exact figure. As for the manual analysis calculations using exact numbers, so there are differences in the results. Nevertheless, these differences are relatively small but in terms of efficiency calculations using CFD program is better than the manual calculation.Keywords: planning, design, heat exchanger, CFD

Collaboration network of the authors

38 authors · 119 co-authorship links · 69 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Muhammadiyah Jakarta
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Sampoerna University
  • Universitas Muhammadiyah Magelang
  • National Research and Innovation Agency
  • Institut Teknologi Sepuluh Nopember
  • University of Pembangunan Nasional Veteran Jawa Timur
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Ery DiniardiUniversitas Muhammadiyah Jakarta4
Wan Hamzah AzmiUniversiti Malaysia Pahang Al-Sultan Abdullah4
Tri Yuni HendrawatiUniversitas Muhammadiyah Jakarta3
N.N.M. ZawawiUniversiti Malaysia Pahang Al-Sultan Abdullah3
Efrizon UmarNational Research and Innovation Agency3
Wan Hamzah AzmiUniversiti Malaysia Pahang Al-Sultan Abdullah2
Alvika Meta SariUniversitas Muhammadiyah Jakarta2
Kushendarsyah SaptajiSampoerna University2
Hasan BasriUniversitas Muhammadiyah Jakarta1
Roni Muhammad SusantoUniversitas Muhammadiyah Magelang1
Suroto MunaharUniversitas Muhammadiyah Magelang1
Taufik NurrochmanUniversitas Muhammadiyah Magelang1
Rizalman MamatUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohd Fairusham GhazaliUniversiti Malaysia Pahang Al-Sultan Abdullah1
Sharifah Norsakinah Syed Zainal AbidinUniversiti Malaysia Pahang Al-Sultan Abdullah1
Safril SafrilUniversiti Malaysia Pahang Al-Sultan Abdullah1
Aminullah A.R.M.Universiti Malaysia Pahang Al-Sultan Abdullah1
Azmi W.H.Universiti Malaysia Pahang Al-Sultan Abdullah1
Syawaluddin SyawaluddinAffiliation unknown1
M Al-HaramainAffiliation unknown1
Hasan BasriAffiliation unknown1
Dhian Trisnadi SetyawanUniversitas Muhammadiyah Jakarta1
Hasan BasriUniversitas Muhammadiyah Jakarta1
Aryadi SuwonoAffiliation unknown1
Nathanael TandianAffiliation unknown1
Efrizon UmarAffiliation unknown1
Kukuh HaryadiUniversitas Muhammadiyah Jakarta1
Yuli Panca AsmaraINTI International University1
Dinda Arina ManasikanaSampoerna University1
Octarina Adiati JuniasihInstitut Teknologi Sepuluh Nopember1
Mochammad Rafli RamadhaniSampoerna University1
Muchamad OktaviandriUniversity of Pembangunan Nasional Veteran Jawa Timur1
Firmansyah FirmansyahHasanuddin University1
Istianto Budhi RahardjaInstitut Teknologi PLN1
Azmairit AzizNational Nuclear Energy Agency of Indonesia1
Sulis YuliantoUniversitas Muhammadiyah Jakarta1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/dinamika/oai, first harvested 31 Oct 2026, last seen 15 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PERANCANGAN DAN VALIDASI DESAIN ALAT PENUKAR KALOR  TIPE SHELL AND TUBE MENGGUNAKAN COMPUTATIONAL FLUID DYNAMICS</dc:title>
	<dc:creator>Kiswoyo, Eko</dc:creator>
	<dc:creator>Ramadhan, Anwar Ilmar</dc:creator>
	<dc:subject xml:lang="en-US"></dc:subject>
	<dc:subject xml:lang="en-US"></dc:subject>
	<dc:description xml:lang="en-US">In this study will be analyzed on a heat exchanger shell and tube type by using CFD (Computational Fluids Dynamic) and analytic calculations. The results of the analysis will be compared later searched the differences and similarities that can be seen the effect that makes a difference or similarity of the analysis results. Analysis using Computational Fluid Dynamics (CFD) includes the manufacture of the model, determining boundary condition, the manufacture of mesh, material data input, then the iteration process. After the iterative process, we will get the results in a visual form by using a color scale. Analysis manual calculation performed after all the data is collected and then put into the calculation formula. The results of both analyzes are the difference in temperature that comes out of the shell of 1.84 0F. The difference is due to the difference in the CFD analysis results visually using a color scale that is not an exact figure. As for the manual analysis calculations using exact numbers, so there are differences in the results. Nevertheless, these differences are relatively small but in terms of efficiency calculations using CFD program is better than the manual calculation.Keywords: planning, design, heat exchanger, CFD</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2017-06-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/dinamika/article/view/2407</dc:identifier>
	<dc:identifier>10.33772/djitm.v8i2.2407</dc:identifier>
	<dc:source xml:lang="en-US">Dinamika : Jurnal Ilmiah Teknik Mesin; Vol 8, No 2 (2017); 39-46</dc:source>
	<dc:source>2502-3373</dc:source>
	<dc:source>2085-8817</dc:source>
	<dc:source>10.33772/djitm.v8i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/dinamika/article/view/2407/1734</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 DINAMIKA – Jurnal Ilmiah Teknik Mesin</dc:rights>
</oai_dc:dc>