Melola Discovery

← Melola Discovery

Journal No SINTA rank

Simulasi Sudut Serang Aliran Air Terhadap Kincir Air Aliran Bawah

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 4 No. 4 (2019)

DOI
10.55679/enthalpy.v4i4.10161
ISSN
2502-8944
Published
2019-12-31
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Waterwheels become one of the solutions to increase the need for power supplies especially in areas that are not able to reach electrical networks that have sufficient water resources. The research aims to determine the influence of change into the dyeing of the blade and slope of the blade angle to the power and efficiency of the lower flow waterwheel. The manufactured waterwheel model is an undershot type of 16-piece blade. The outer diameter of the Ferris wheel is 0.2 m and the diameter is 0.12 m. Blade is flat in size (0, 04x0,04) m. The Ferris wheel is made up of as many as 3 pieces with a tilt difference of the blade angle of 00 from the shaft, 100 of the shaft, and 200 of the shaft. The results showed that on immersion blade 0.01 m obtained power 0.16 Watt and efficiency 12.24%, in blade dyeing 0.02 m obtained power 0.162 Watt and efficiency 12.42 %, and dyeing 0.03 m obtained power 0.176 Watt and efficiency 13.45 %. While at the slope of a blade angle is obtained by 0.16 Watt power and efficiency 12.24 %, on the slope of blade angle of 100 acquired power 0.302 Watt and efficiency 23.1 %, and at the slope of a blade angle, 200 acquired power 0.447 Watt and efficiency 34.18 %. So it can be said that the more in the immersion blade the greater the power and efficiency of the Ferris wheel, and the more oblique blade angle than the greater the power and efficiency of the windmill.Keywords: Waterwheel, blade, angle, power, and efficiency

Collaboration network of the authors

40 authors · 211 co-authorship links · 5 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Poltekkes Kemenkes Palu
  • Universitas Gadjah Mada
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Kadir KadirUniversitas Halu Oleo8
Prinob AksarUniversitas Halu Oleo5
Lukas Kano MangallaUniversitas Halu Oleo5
Agustinus LolokAffiliation unknown5
Aminur AminurAffiliation unknown5
Samhuddin SamhuddinUniversitas Halu Oleo4
Budiman SudiaUniversitas Halu Oleo4
Samhuddin SamhuddinAffiliation unknown4
La HasanuddinAffiliation unknown3
Salimin SaliminAffiliation unknown3
Aminur AminurUniversitas Halu Oleo3
Yuspian GunawanUniversitas Halu Oleo3
Al Ichlas ImranUniversitas Halu Oleo3
Agustinus LolokUniversitas Halu Oleo3
Al Ichlas ImranAffiliation unknown3
Aminur AminurUniversitas Halu Oleo2
Yuspian GunawanAffiliation unknown2
Ridway BalakaUniversitas Halu Oleo2
Salimin SaliminUniversitas Halu Oleo2
Budiman SudiaAffiliation unknown2
Aldiyanto AldiyantoAffiliation unknown1
Adib SatonoUniversitas Halu Oleo1
Kadek Edy SusantoUniversitas Halu Oleo1
Wandi HaryansaUniversitas Halu Oleo1
Rival Kahfi GamaUniversitas Halu Oleo1
Mirna PratiwiwahyuniAffiliation unknown1
Laode SafiuddinAffiliation unknown1
La Ode MagribiAffiliation unknown1
Nasrul NasrulPoltekkes Kemenkes Palu1
La KarimunaAffiliation unknown1
Abd KadirAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Abd KadirAffiliation unknown1
Sudarsono SudarsonoUniversitas Gadjah Mada1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Kadir KadirUniversitas Halu Oleo1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 1 Nov 2026, last seen 15 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Simulasi Sudut Serang Aliran Air Terhadap Kincir Air Aliran Bawah</dc:title>
	<dc:creator>Sauf, Muhamad</dc:creator>
	<dc:creator>Balaka, Ridway</dc:creator>
	<dc:creator>Hasanudin, La</dc:creator>
	<dc:description xml:lang="en-US">Waterwheels become one of the solutions to increase the need for power supplies especially in areas that are not able to reach electrical networks that have sufficient water resources. The research aims to determine the influence of change into the dyeing of the blade and slope of the blade angle to the power and efficiency of the lower flow waterwheel. The manufactured waterwheel model is an undershot type of 16-piece blade. The outer diameter of the Ferris wheel is 0.2 m and the diameter is 0.12 m. Blade is flat in size (0, 04x0,04) m. The Ferris wheel is made up of as many as 3 pieces with a tilt difference of the blade angle of 00 from the shaft, 100 of the shaft, and 200 of the shaft. The results showed that on immersion blade 0.01 m obtained power 0.16 Watt and efficiency 12.24%, in blade dyeing 0.02 m obtained power 0.162 Watt and efficiency 12.42 %, and dyeing 0.03 m obtained power 0.176 Watt and efficiency 13.45 %. While at the slope of a blade angle is obtained by 0.16 Watt power and efficiency 12.24 %, on the slope of blade angle of 100 acquired power 0.302 Watt and efficiency 23.1 %, and at the slope of a blade angle, 200 acquired power 0.447 Watt and efficiency 34.18 %. So it can be said that the more in the immersion blade the greater the power and efficiency of the Ferris wheel, and the more oblique blade angle than the greater the power and efficiency of the windmill.Keywords: Waterwheel, blade, angle, power, and efficiency</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10161</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v4i4.10161</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 4, No 4 (2019): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v4i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10161/7249</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>