Melola Discovery

← Melola Discovery

Journal

Analisa Pengaruh Penambahan Cangkang Kerang Terhadap Sifat Mekanik Material Komposit Berpenguat Serat Pinang

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 9 No. 2 (2024) · pp. 32–39

DOI
10.55679/enthalpy.v9i2.47051
ISSN
2502-8944
Published
2024-05-31
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Composite materials reinforced with natural fibers continue to be developed as alternative materials to replace composite materials. The purpose of this study was to determine the effect of the composition of the matrix, fiber and pokea shell filler on the tensile strength value of the composite polyester resin reinforced with areca nut shell fiber; To determine the effect of the composition of the matrix, fiber and pokea shell filler on the bending strength value of the composite polyester resin reinforced with areca nut shell fiber. Using the Hand Lay Up method, areca nut skin fiber and pokea shell powder filler. Using tensile and bending testing. The results of this study show that the highest average tensile stress is the fraction 70%:20%:10%, the average tensile stress is 13,752 MPa given a force of 1143,687 N. The lowest composite average tensile stress value is the fraction. 70:5%:25% indicates 7,745 MPa. The highest bending test value in the 70%:5%:25% fraction is 35,981 MPa which is given a force of 357,883 N and the lowest average bending stress value is in the 70%:20%:10% fraction of 31,777 MPa given a force of 365,377 N. Keywords: Composite, tensile strength, ultimate strength, fiber

Collaboration network of the authors

40 authors · 174 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Samhuddin SamhuddinUniversitas Halu Oleo11
Yuspian GunawanUniversitas Halu Oleo10
Aminur AminurUniversitas Halu Oleo9
La HasanudinUniversitas Halu Oleo8
Nanang EndriatnoUniversitas Halu Oleo7
Ridway BalakaUniversitas Halu Oleo6
Al Ichlas ImranUniversitas Halu Oleo6
Samhuddin SamhuddinAffiliation unknown5
Salimin SaliminUniversitas Halu Oleo5
Sudarsono SudarsonoUniversitas Halu Oleo4
Sudarsono SudarsonoUniversitas Halu Oleo4
Yuspian GunawanAffiliation unknown3
Salimin SaliminAffiliation unknown3
Jaka Seru Dwi SaputraAffiliation unknown3
Abd. Rahman KadirUniversitas Halu Oleo3
Lukas Kano MangallaUniversitas Halu Oleo3
La Ode Ahmad BarataUniversitas Halu Oleo2
R BalakaAffiliation unknown2
Edward NgiiUniversitas Halu Oleo2
Budiman SudiaAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
Robin RobinUniversitas Halu Oleo1
La HasanuddinAffiliation unknown1
Aminur AminurUniversitas Halu Oleo1
Raden Rinova SisworoAffiliation unknown1
Abd KadirAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Achmad Nur AliansyahUniversitas Halu Oleo1
La Ode Ahmad BarataAffiliation unknown1
Safarno SafarnoUniversitas Halu Oleo1
Mufli MufliAffiliation unknown1
Fadel Alfahri FahriUniversitas Halu Oleo1
Muhammad HasbiUniversitas Halu Oleo1
Darsono DarsonoUniversitas Halu Oleo1
laode IrfanAffiliation unknown1
Ridway BalakaAffiliation unknown1
Mahrun MahrunAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 1 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisa Pengaruh Penambahan Cangkang Kerang Terhadap Sifat Mekanik Material Komposit Berpenguat Serat Pinang</dc:title>
	<dc:creator>Saputra, I Nyoman Ardika</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:creator>Aksar, Prinob</dc:creator>
	<dc:description xml:lang="en-US">Composite materials reinforced with natural fibers continue to be developed as alternative materials to replace composite materials. The purpose of this study was to determine the effect of the composition of the matrix, fiber and pokea shell filler on the tensile strength value of the composite polyester resin reinforced with areca nut shell fiber; To determine the effect of the composition of the matrix, fiber and pokea shell filler on the bending strength value of the composite polyester resin reinforced with areca nut shell fiber. Using the Hand Lay Up method, areca nut skin fiber and pokea shell powder filler. Using tensile and bending testing. The results of this study show that the highest average tensile stress is the fraction 70%:20%:10%, the average tensile stress is 13,752 MPa given a force of 1143,687 N. The lowest composite average tensile stress value is the fraction. 70:5%:25% indicates 7,745 MPa. The highest bending test value in the 70%:5%:25% fraction is 35,981 MPa which is given a force of 357,883 N and the lowest average bending stress value is in the 70%:20%:10% fraction of 31,777 MPa given a force of 365,377 N.

Keywords: Composite, tensile strength, ultimate strength, fiber</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2024-05-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/47051</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v9i2.47051</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 9, No 2 (2024): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 32-39</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v9i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/47051/20253</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>