Melola Discovery

← Melola Discovery

Journal

Perancangan Alat Treker Piston Kaliper Rem Mobil Dengan Sistem Hidrolik

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 7 No. 4 (2022) · pp. 136–142

DOI
10.55679/enthalpy.v7i4.28449
ISSN
2502-8944
Published
2022-12-23
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The hydraulic piston tracker is a tool used to press the car's caliper pistons when changing the disc pad. This study aims to design and design a piston caliper treker tool with a maximum strength of 50Kg and to determine the components and dimensions used in this tool. In this study, the main system is hydraulic which converts the pressure to be greater. The pressure produced by this tool is 50Kg or 490.5 N using only the force of the hand of 8.05 N. For the size of this tool it has an overall length of 27 cm, a retaining width of 11.5 cm, a lever length of 20 cm and a hydraulic tube diameter. 3 cm. main material for hydraulic cylinder chrome steel s30c 48 (Kg/mm2), low carbon steel plate (ST42) 36 (Kg/mm2), bolts, handles and levers Low carbon steel (ST42) 36 (Kg/mm2).Key words: Tool, Treker, design, hydraulic

Collaboration network of the authors

40 authors · 183 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Prinob AksarUniversitas Halu Oleo8
Budiman SudiaUniversitas Halu Oleo5
Salimin SaliminUniversitas Halu Oleo4
Lukas Kano MangallaUniversitas Halu Oleo4
La HasanudinUniversitas Halu Oleo3
Samhuddin SamhuddinUniversitas Halu Oleo3
Aminur AminurUniversitas Halu Oleo3
Kadir KadirUniversitas Halu Oleo3
Al Ichlas ImranUniversitas Halu Oleo3
Abd KadirUniversitas Halu Oleo2
Agustinus LolokUniversitas Halu Oleo2
Ridway BalakaUniversitas Halu Oleo2
Nanang EndriatnoUniversitas Halu Oleo2
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Aminur AminurUniversitas Halu Oleo1
La HasanuddinAffiliation unknown1
Samhuddin SamhuddinAffiliation unknown1
Yuspian GunawanAffiliation unknown1
Ridway BalakaAffiliation unknown1
Salimin SaliminAffiliation unknown1
Asad SyahdanAffiliation unknown1
Abd kadirAffiliation unknown1
Safarno SafarnoUniversitas Halu Oleo1
Mufli MufliAffiliation unknown1
Salman MusliminAffiliation unknown1
La Ode Ahmad BarataUniversitas Halu Oleo1
Budiman BudimanUniversitas Halu Oleo1
Fadel Alfahri FahriUniversitas Halu Oleo1
Kadek LanaAffiliation unknown1
Muh. Azim Panca WardanaUniversitas Halu Oleo1
Marwin MarwinAffiliation unknown1
Muhlas Adi PutraUniversitas Halu Oleo1
Muh. Syahrul AnwarUniversitas Halu Oleo1
Tri AgustiUniversitas Halu Oleo1
Sisno SisnoUniversitas Halu Oleo1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 1 Nov 2026, last seen 15 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Perancangan Alat Treker Piston Kaliper Rem Mobil Dengan Sistem Hidrolik</dc:title>
	<dc:creator>Ariambaryana, I Putu Ade</dc:creator>
	<dc:creator>Gunawan, Yuspian</dc:creator>
	<dc:creator>Sisworo, Raden Rinova</dc:creator>
	<dc:description xml:lang="en-US">The hydraulic piston tracker is a tool used to press the car's caliper pistons when changing the disc pad. This study aims to design and design a piston caliper treker tool with a maximum strength of 50Kg and to determine the components and dimensions used in this tool. In this study, the main system is hydraulic which converts the pressure to be greater. The pressure produced by this tool is 50Kg or 490.5 N using only the force of the hand of 8.05 N. For the size of this tool it has an overall length of 27 cm, a retaining width of 11.5 cm, a lever length of 20 cm and a hydraulic tube diameter. 3 cm. main material for hydraulic cylinder chrome steel s30c 48 (Kg/mm2), low carbon steel plate (ST42) 36 (Kg/mm2), bolts, handles and levers Low carbon steel (ST42) 36 (Kg/mm2).Key words : Tool, Treker, design, hydraulic</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-12-23</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28449</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v7i4.28449</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 7, No 4 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 136-142</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v7i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28449/16828</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>