Melola Discovery

← Melola Discovery

Open access Journal No SINTA rank

Risk Analysis of Hot Working in Confined Space Using Confined Space Risk Analysis (CRSA) and Bowtie Analysis Method on LPG Tanker Repair Process

Maritime Park: Journal of Maritime Technology and Society · Vol. ume (2023) · pp. 22–27

DOI
10.62012/mp.v2i1.25486
ISSN
2828-6669, 2828-7010
Published
2023-02-28
Publisher
Department of Ocean Engineering, Faculty of Engineering, Hasanuddin University
Language
en
License
creativecommons.org/licenses/by/4.0

Abstract

Confined space is a room that is large enough and has a configuration in such a way that workers can enter and do work in it. In the ship repair process it is not uncommon to do it in a confined space area.. The purpose of writing this final project is to identify hazards and carry out risk assessments in hot working in confined spaces in the LPG tanker ship repair process so that the dominant hazard is obtained, the causes and consequences of the dominant hazard are identified, and the right dominant risk control can be identified. This study begins with the identification of the characteristics of confined space on ships by grouping them into 7 risk categories of confined space. Then carry out risk identification by explaining the components of a risk, including: types of hazards, dangerous work, dangerous events and the consequences that can occur. After that, an initial risk assessment was carried out for hot working in confined spaces on ship repairs presented in matrix form. After that, risk control is carried out and the final risk reassessment for hot working in confined space on ship repair is carried out by continuing the matrix that was previously made. In the final stage, an analysis is carried out using the bowtie method to analyze the causes, impacts, and controls of these risks.

Keywords

Collaboration network of the authors

3 authors · 3 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Institut Teknologi Sepuluh Nopember
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/maritimepark/oai, first harvested 2 Nov 2026, last seen 15 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Risk Analysis of Hot Working in Confined Space Using Confined Space Risk Analysis (CRSA) and Bowtie Analysis Method on LPG Tanker Repair Process</dc:title>
	<dc:creator xml:lang="en">Dhanistha, Wimala L</dc:creator>
	<dc:creator xml:lang="en">Silvianita, Silvianita</dc:creator>
	<dc:creator xml:lang="en">M, Roshi</dc:creator>
	<dc:subject xml:lang="en">Hot Working; Confined Space Risk Analysis; Bowtie Analysis</dc:subject>
	<dc:description xml:lang="en">Confined space is a room that is large enough and has a configuration in such a way that workers can enter and do work in it. In the ship repair process it is not uncommon to do it in a confined space area. . The purpose of writing this final project is to identify hazards and carry out risk assessments in hot working in confined spaces in the LPG tanker ship repair process so that the dominant hazard is obtained, the causes and consequences of the dominant hazard are identified, and the right dominant risk control can be identified. This study begins with the identification of the characteristics of confined space on ships by grouping them into 7 risk categories of confined space. Then carry out risk identification by explaining the components of a risk, including: types of hazards, dangerous work, dangerous events and the consequences that can occur. After that, an initial risk assessment was carried out for hot working in confined spaces on ship repairs presented in matrix form. After that, risk control is carried out and the final risk reassessment for hot working in confined space on ship repair is carried out by continuing the matrix that was previously made. In the final stage, an analysis is carried out using the bowtie method to analyze the causes, impacts, and controls of these risks.</dc:description>
	<dc:publisher xml:lang="en">Department of Ocean Engineering, Faculty of Engineering, Hasanuddin University</dc:publisher>
	<dc:date>2023-02-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/maritimepark/article/view/25486</dc:identifier>
	<dc:identifier>10.62012/mp.v2i1.25486</dc:identifier>
	<dc:source xml:lang="en">Maritime Park: Journal of Maritime Technology and Society; Volume 2, Issue 1, 2023; 22-27</dc:source>
	<dc:source>2828-6669</dc:source>
	<dc:source>2828-7010</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/maritimepark/article/view/25486/9384</dc:relation>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>