In the maritime industry, an effective mooring system is essential to ensure the stability and safety of offshore operations. A mooring system is a collection of equipment and techniques used to maintain the position and stability of a structure at sea or on an accommodation work barge. In practice, there are still various challenges and problems in the use of mooring systems on accommodation work barges. Factors such as weather conditions, sea depth, and the type of anchor used must be considered. This study will focus on analyzing the factors that affect the mooring system, analyzing the ship's RAO, and evaluating the weight of the anchor and tension wire. This study aims to produce recommendations for the best mooring system and configuration based on four types of seabed. The analysis was carried out using Ansys AQWA software and criteria set by ABS, DNV, and API. The factor that most influences the tension wire is the environmental load received by the ship (currents, waves, wind). Differences in environmental loads will also result in different tension values. In holding power analysis, mud seabeds produce the lowest holding power, while rock seabeds produce the highest holding power but are difficult to anchor. The 8 mooring system configuration is suitable for floating hotel operations because it has a good motion response, while 6 mooring is recommended for well intervention work because it is more efficient during the work process. The best anchor placement is located at 45° - 60° from the ship's centerline because it has an even load distribution.
Indonesian
Dalam industri maritim, sistem jangkar yang efektif sangat penting untuk memastikan stabilitas dan keamanan operasi lepas pantai. Sistem jangkar merupakan kumpulan peralatan dan teknik yang digunakan untuk mempertahankan posisi dan stabilitas struktur di laut atau di atas kapal kerja akomodasi. Dalam praktiknya, masih terdapat berbagai tantangan dan masalah dalam penggunaan sistem jangkar pada kapal kerja akomodasi. Faktor-faktor seperti kondisi cuaca, kedalaman laut, dan jenis jangkar yang digunakan harus dipertimbangkan. Studi ini akan fokus pada analisis faktor-faktor yang mempengaruhi sistem jangkar, analisis RAO kapal, dan evaluasi berat jangkar dan kabel tegangan. Studi ini bertujuan untuk menghasilkan rekomendasi sistem jangkar dan konfigurasi terbaik berdasarkan empat jenis dasar laut. Analisis dilakukan menggunakan perangkat lunak Ansys AQWA dan kriteria yang ditetapkan oleh ABS, DNV, dan API. Faktor yang paling mempengaruhi kabel tegangan adalah beban lingkungan yang diterima kapal (arus, gelombang, angin). Perbedaan beban lingkungan juga akan menghasilkan nilai tegangan yang berbeda. Dalam analisis daya tahan, dasar laut berpasir menghasilkan daya tahan terendah, sementara dasar laut berbatu menghasilkan daya tahan tertinggi tetapi sulit untuk dipasang jangkar. Konfigurasi sistem jangkar 8 cocok untuk operasi hotel terapung karena memiliki respons gerak yang baik, sementara konfigurasi 6 jangkar direkomendasikan untuk pekerjaan intervensi sumur karena lebih efisien selama proses kerja. Penempatan jangkar terbaik berada pada sudut 45° - 60° dari garis tengah kapal karena memiliki distribusi beban yang merata.
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
Universitas Darma Persada
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-author
Organisation
Joint articles
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.