Melola Discovery

← Melola Discovery

Journal

SIMULASI DISTRIBUSI TEKANAN INJEKSI PADA RESERVOIR MENGGUNAKAN METODE FINITE DIFFERENCE

JURNAL GEOCELEBES · Vol. 4 No. 1 (2020) · pp. 1–6

DOI
10.20956/geocelebes.v4i1.7439
ISSN
2579-5546, 2579-5821
Published
2020-01-01
Publisher
Departemen Geofisika, FMIPA - Universitas Hasanuddin, Makassar
Language
en

Abstract

The modeling of reservoir injection pressure distribution is very important to perceive reservoir management, especially in estimating the pushing mechanism. The modeling of reservoir injection pressure distribution was carried out by applying the analytic equation of fluid flow to the porous media of Darcy's law and transformed to a finite difference numerical equation which then used Neumann boundary conditions. The parameters used in the modeling were: permeability, average layer thickness, porosity, acceleration of gravity, viscosity, and area’s width. Based on the results of modeling, the injection pressure distribution area decreased as injection pressure rate increased. This decrease occurred due to an imbalance between the volume of reservoir fluid produced by the volume of water from the aquifer that replaced the reservoir, caused emptying. From the results of the modeling the amount of oil production, obtained from the remaining oil reserves to the initial oil acquisition in the reservoir after the process of pressure maintenance, could be found.

Collaboration network of the authors

16 authors · 44 co-authorship links · 23 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Sekolah Tinggi Teknologi Migas
  • Hasanuddin University
  • Universitas Halu Oleo
  • China University of Petroleum, East China
  • China University of Petroleum, Beijing
  • Universitas Muslim Indonesia
  • Institut Teknologi Petroleum Balongan
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Rohima Sera AfifahAffiliation unknown3
La BatiaUniversitas Halu Oleo1
Jamaluddin JamaluddinChina University of Petroleum, East China1
Emi Prasetyawati UmarUniversitas Muslim Indonesia1
Septian Tri NugrahaChina University of Petroleum, Beijing1
Amiruddin AmiruddinPoliteknik Siber dan Sandi Negara1
Dea AnandaSekolah Tinggi Teknologi Migas1
Warto UtomoInstitut Teknologi Petroleum Balongan1
Joko WiyonoSekolah Tinggi Teknologi Migas1
Baiq Maulinda UlfahSekolah Tinggi Teknologi Migas1
Nijusiho ManikSekolah Tinggi Teknologi Migas1
Abdi SuprayitnoSekolah Tinggi Teknologi Migas1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/geocelebes/oai, first harvested 3 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">SIMULASI DISTRIBUSI TEKANAN INJEKSI PADA RESERVOIR MENGGUNAKAN METODE FINITE DIFFERENCE</dc:title>
	<dc:creator xml:lang="en">Jamaluddin, Jamaluddin</dc:creator>
	<dc:creator xml:lang="en">El-Ridlo, Nuruddin Kafy</dc:creator>
	<dc:creator xml:lang="en">Ryka, Hamriani</dc:creator>
	<dc:creator xml:lang="en">Maria, Maria</dc:creator>
	<dc:description xml:lang="en">The modeling of reservoir injection pressure distribution is very important to perceive reservoir management, especially in estimating the pushing mechanism. The modeling of reservoir injection pressure distribution was carried out by applying the analytic equation of fluid flow to the porous media of Darcy's law and transformed to a finite difference numerical equation which then used Neumann boundary conditions. The parameters used in the modeling were: permeability, average layer thickness, porosity, acceleration of gravity, viscosity, and area’s width. Based on the results of modeling, the injection pressure distribution area decreased as injection pressure rate increased. This decrease occurred due to an imbalance between the volume of reservoir fluid produced by the volume of water from the aquifer that replaced the reservoir, caused emptying. From the results of the modeling the amount of oil production, obtained from the remaining oil reserves to the initial oil acquisition in the reservoir after the process of pressure maintenance, could be found.</dc:description>
	<dc:publisher xml:lang="en">Departemen Geofisika, FMIPA - Universitas Hasanuddin, Makassar</dc:publisher>
	<dc:date>2020-01-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/geocelebes/article/view/7439</dc:identifier>
	<dc:identifier>10.20956/geocelebes.v4i1.7439</dc:identifier>
	<dc:source xml:lang="en">JURNAL GEOCELEBES; Vol. 4 No. 1: April 2020; 1-6</dc:source>
	<dc:source>2579-5546</dc:source>
	<dc:source>2579-5821</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/geocelebes/article/view/7439/4636</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 JURNAL GEOCELEBES</dc:rights>
</oai_dc:dc>