Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Defect Detection in Ceramic Images Using Sigma Edge Information and Contour Tracking Method

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 1 (2016)

DOI
10.11591/ijece.v6i1.9343
ISSN
2088-8708, 2088-8708
Published
2016-02-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc-nd/4.0

Abstract

In this paper, we suggest a method of detecting defects by applying Hough transform and least squares on ceramic images obtained from non-destructive testing. In the ceramic images obtained from non-destructive testing, the background area, where the defect does not exist, commonly shows gradual change of luminosity in vertical direction. In order to extract the background area which is going to be used in the detection of defects, Hough transform is performed to rotate the ceramic image in a way that the direction of overall luminosity change lies in the vertical direction as much as possible. Least squares is then applied on the rotated image to approximate the contrast value of the background area. The extracted background area is used for extracting defects from the ceramic images. In this paper we applied this method on ceramic images acquired from non-destructive testing. It was confirmed that extracted background area could be effectively applied for searching the section where the defect exists and detecting the defect.

Collaboration network of the authors

11 authors · 29 co-authorship links · 15 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Kyung Hee University
  • Silla University
  • Dong-Eui University
  • Yong-in Songdam College
  • Pusan National University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Doo Heon SongYong-in Songdam College12
Hyun Jun ParkPusan National University4
Hae-Jung LeeAffiliation unknown2
Joonsung ParkKyung Hee University2
Hosung NhoAffiliation unknown1
Hyun‐Min ChoiKyung Hee University1
Kyung-Ae KimKyung Hee University1
Jong Hee LeeSilla University1
Sang-Seok YunAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Defect Detection in Ceramic Images Using Sigma Edge Information and Contour Tracking Method</dc:title><dc:creator>Kim, Kwang-Baek</dc:creator><dc:creator>Woo, Young Woon</dc:creator><dc:description>&lt;jats:p&gt;In this paper, we suggest a method of detecting defects by applying Hough transform and least squares on ceramic images obtained from non-destructive testing. In the ceramic images obtained from non-destructive testing, the background area, where the defect does not exist, commonly shows gradual change of luminosity in vertical direction. In order to extract the background area which is going to be used in the detection of defects, Hough transform is performed to rotate the ceramic image in a way that the direction of overall luminosity change lies in the vertical direction as much as possible. Least squares is then applied on the rotated image to approximate the contrast value of the background area. The extracted background area is used for extracting defects from the ceramic images. In this paper we applied this method on ceramic images acquired from non-destructive testing. It was confirmed that extracted background area could be effectively applied for searching the section where the defect exists and detecting the defect.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i1.9343</dc:identifier><dc:identifier>10.11591/ijece.v6i1.9343</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 1 (2016); 160</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://www.iaescore.com/journals/index.php/IJECE/article/viewFile/92/108</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights></oai_dc:dc>