Melola Discovery

← Melola Discovery

Open access Journal SINTA 3

TAGUCHI METHOD APPLIED FOR THE INVESTIGATION OF CORROSION LEVEL ON METAL INERT GAS WELDING OF MILD STEEL

BAREKENG: Jurnal Ilmu Matematika dan Terapan · Vol. 16 No. 3 (2022) · pp. 845–852

DOI
10.30598/barekengvol16iss3pp845-852
ISSN
2615-3017, 1978-7227
Published
2022-09-01
Publisher
PATTIMURA UNIVERSITY
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Mild steel has a wide range of uses such as in the construction field, automotive field, machinery industry, cookware, and pipeline. Metal Inert Gas (MIG) welding act as an assembly method of mild steel. Corrosion level is a common problem that occurs in MIG welding on mild steel. In this study, the suitable welding parameters such as voltage, number of passes, and method of welding were chosen in the experimental testing and the experimental testing was planned by using the Design of Experiment (DoE) as part of Taguchi method. The welded mild steel specimens were evaluated using a corrosion test. The data analysis was done by using Taguchi method. For the parameter to be the optimum welding parameter, the corrosion level was as low as possible. In this case, the S/N ratio smaller is better common interest is chosen. By using the Minitab 18 software, the S/N ratio was calculated. Hence from the result, the optimum parameter is 9V voltage, three passes and the welding method was circle push.

Collaboration network of the authors

14 authors · 33 co-authorship links · 12 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Putra Indonesia "YPTK"
  • Gunadarma University
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Universitas Baiturrahmah
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Sumijan SumijanUniversitas Putra Indonesia "YPTK"2
Julius SantonyUniversitas Putra Indonesia "YPTK"2
Johan HarlanGunadarma University2
Bob Subhan RizaAffiliation unknown1
Yuhandri YuhandriAffiliation unknown1
Gunadi Widi NurcahyoUniversitas Putra Indonesia "YPTK"1
Sarifuddin MadendaGunadarma University1
Catur SuharintoUniversitas Baiturrahmah1
Irawadi PutraAffiliation unknown1
Romi HardiantoUniversitas Putra Indonesia "YPTK"1
Mutiana PratiwiUniversitas Putra Indonesia "YPTK"1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs3.unpatti.ac.id/index.php/barekeng/oai, first harvested 5 Nov 2026, last seen 15 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">TAGUCHI METHOD APPLIED FOR THE INVESTIGATION OF CORROSION LEVEL ON METAL INERT GAS WELDING OF MILD STEEL</dc:title>
	<dc:creator>Fatchurrohman, Nanang</dc:creator>
	<dc:creator>Chin, Low Tze</dc:creator>
	<dc:creator>Na’am, Jufriadif</dc:creator>
	<dc:description xml:lang="en-US">Mild steel has a wide range of uses such as in the construction field, automotive field, machinery industry, cookware, and pipeline. Metal Inert Gas (MIG) welding act as an assembly method of mild steel. Corrosion level is a common problem that occurs in MIG welding on mild steel. In this study, the suitable welding parameters such as voltage, number of passes, and method of welding were chosen in the experimental testing and the experimental testing was planned by using the Design of Experiment (DoE) as part of Taguchi method. The welded mild steel specimens were evaluated using a corrosion test. The data analysis was done by using Taguchi method. For the parameter to be the optimum welding parameter, the corrosion level was as low as possible. In this case, the S/N ratio smaller is better common interest is chosen. By using the Minitab 18 software, the S/N ratio was calculated. Hence from the result, the optimum parameter is 9V voltage, three passes and the welding method was circle push. </dc:description>
	<dc:publisher xml:lang="en-US">PATTIMURA UNIVERSITY</dc:publisher>
	<dc:date>2022-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs3.unpatti.ac.id/index.php/barekeng/article/view/5715</dc:identifier>
	<dc:identifier>10.30598/barekengvol16iss3pp845-852</dc:identifier>
	<dc:source xml:lang="en-US">BAREKENG: Jurnal Ilmu Matematika dan Terapan; Vol 16 No 3 (2022): BAREKENG: Journal of Mathematics and Its Applications; 845-852</dc:source>
	<dc:source>2615-3017</dc:source>
	<dc:source>1978-7227</dc:source>
	<dc:source>10.30598/barekengvol16iss3year2022</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs3.unpatti.ac.id/index.php/barekeng/article/view/5715/4606</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Nanang Fatchurrohman, Low Tze Chin, Jufriadif Na’am</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>