Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Design Of A Nonvolatile 8T1R SRAM Cell For Instant-On Operation

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 3 (2016)

DOI
10.11591/ijece.v6i3.9448
ISSN
2088-8708, 2088-8708
Published
2016-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc-nd/4.0

Abstract

Now-a-days, Energy consumption is the major key factor in Memories. By switching the circuit in off mode and with an lower voltages, leads to decrease in an power dissipation of the circuit. Compared to DRAM SRAM’S are mostly used because of their data retaining capability. The major advantage of using SRAM’s rather than DRAM’S is that, they are providing fast power-on/off speeds. Hence SRAM’s are more preferred over DRAM’s for better instant-on operation. Generally SRAM’s are classified in to two types namely volatile and non-volatile SRAM’s. A non-volatile SRAM enables chip to achieve performance factors and also provides an restore operation which will be enabled by an restore signal to restore the data and also power-up operation is performed. This paper describes about novel NVSRAM circuit which produces better “instant-on operation” compared to previous techniques used in SRAM’s. In addition to normal 6T SRAM core, we are using RRAM circuitry (Resistive RAM) to provide better instant-on operation. By comparing the performance factors with 8T2R and 9T2R, 8T1R design performs the best in the Nano meter scale. Thus this paper provides better performances in power, energy, propagation delay and area factors as compared with other designs.

Collaboration network of the authors

2 authors · 1 co-authorship link

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 22 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design Of A Nonvolatile 8T1R SRAM Cell For Instant-On Operation</dc:title><dc:creator>Mounica, J.</dc:creator><dc:creator>Ganesh, G.V.</dc:creator><dc:description>&lt;jats:p&gt;Now-a-days, Energy consumption is the major key factor in Memories. By switching the circuit in off mode and with an lower voltages, leads to decrease in an power dissipation of the circuit. Compared to DRAM SRAM’S are mostly used because of their data retaining capability. The major advantage of using SRAM’s rather than DRAM’S is that, they are providing fast power-on/off speeds. Hence SRAM’s are more preferred over DRAM’s for better instant-on operation. Generally SRAM’s are classified in to two types namely volatile and non-volatile SRAM’s. A non-volatile SRAM enables chip to achieve performance factors and also provides an restore operation which will be enabled by an restore signal to restore the data and also power-up operation is performed. This paper describes about novel NVSRAM circuit which produces better “instant-on operation” compared to previous techniques used in SRAM’s. In addition to normal 6T SRAM core, we are using RRAM circuitry (Resistive RAM) to provide better instant-on operation. By comparing the performance factors with 8T2R and 9T2R, 8T1R design performs the best in the Nano meter scale. Thus this paper provides better performances in power, energy, propagation delay and area factors as compared with other designs.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i3.9448</dc:identifier><dc:identifier>10.11591/ijece.v6i3.9448</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 3 (2016); 1183</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://www.iaescore.com/journals/index.php/IJECE/article/viewFile/474/348</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights></oai_dc:dc>