Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Report on Power Compensation and Total Harmonic Distortion level Analysis

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 6 (2016)

DOI
10.11591/ijece.v6i6.11221
ISSN
2088-8708, 2088-8708
Published
2016-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc-nd/4.0

Abstract

In the chart of Indian science based industry, pharmaceutical industry is on top position. So it is essential to fulfil such critical requirement or demand, production should be with high speed. For such high production, using of software based machineries, electronic circuits are been used. By using such electronic based equipment’s and machineries, it is obvious day by day increasing non-linear load of the industry which lead to lagging power factor. In electric system nonlinear load with low power factor draws more current from source. So because of such high current drawn, life of switchgear, wire and other electrical equipment decreases. So due to large equipment and wasted energy, the electrical utilities company usually charge a higher cost to industrial customer for the constant logging power factor. To improving the lagging power factor, industry may prefer to install capacitor bank in series. But installation of capacitor power bank leads to the increment of total harmonics distortion level. In common plant, containing power factor correction capacitor, It is been seen that normal resonant frequency falls normally in the range of 5 th to 13 th harmonics. So this non-linear load leads to inject current at 5 th, 7 th, 11 th and 13 th harmonics. It will usually result on producing the problems with switchgears, damaged capacitor banks and failure to the electrical distribution system.

Collaboration network of the authors

2 authors · 1 co-authorship link

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Bharati Vidyapeeth (Deemed to be University)
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Report on Power Compensation and Total Harmonic Distortion level Analysis</dc:title><dc:creator>Ramesh Kalaskar, Nikita</dc:creator><dc:creator>Holmukhe, Rajesh</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;In the chart of Indian science based industry, pharmaceutical industry is on top position. So it&amp;lt;em&amp;gt; &amp;lt;/em&amp;gt;is essential to fulfil such critical requirement or demand, production should be with high speed. For such high production, using of software based machineries, electronic circuits are been used. By using such electronic based equipment’s and machineries, it is obvious day by day increasing non-linear load of the industry which lead to lagging power factor. In electric system nonlinear load with low power factor draws more current from source. So because of such high current drawn, life of switchgear, wire and other electrical equipment decreases. So due to large equipment and wasted energy, the electrical utilities company usually charge a higher cost to industrial customer for the constant logging power factor. To improving the lagging power factor, industry may prefer to install capacitor bank in series. But installation of capacitor power bank leads to the increment of total harmonics distortion level. In common plant, containing power factor correction capacitor, It is been seen that normal resonant frequency falls normally in the range of 5&amp;lt;sup&amp;gt;th&amp;lt;/sup&amp;gt; to 13&amp;lt;sup&amp;gt;th&amp;lt;/sup&amp;gt; harmonics. So this non-linear load leads to inject current at 5&amp;lt;sup&amp;gt;th&amp;lt;/sup&amp;gt;, 7&amp;lt;sup&amp;gt;th&amp;lt;/sup&amp;gt;, 11&amp;lt;sup&amp;gt;th&amp;lt;/sup&amp;gt; and 13&amp;lt;sup&amp;gt;th&amp;lt;/sup&amp;gt; harmonics. It will usually result on producing the problems with switchgears, damaged capacitor banks and failure to the electrical distribution system.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i6.11221</dc:identifier><dc:identifier>10.11591/ijece.v6i6.11221</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 6 (2016); 2577</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://www.iaescore.com/journals/index.php/IJECE/article/viewFile/5868/5681</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights></oai_dc:dc>