Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Design and Implementation of Wheelchair Controller Based Electroencephalogram Signal using Microcontroller

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 6 (2016)

DOI
10.11591/ijece.v6i6.11452
ISSN
2088-8708, 2088-8708
Published
2016-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc-nd/4.0

Abstract

Wheelchair is a medical device that can help patients, especially for persons with physical disabilities. In this research has designed a wheelchair that can be controlled using brain wave. Mind wave device is used as a sensor to capture brain waves. Fuzzy method is used to process data from mind wave. In the design was used a modified wheelchair (original wheelchair modified with addition dc motor that can be control using microcontroller ). After processing data from mindwave using fuzzy method, then microcontroller ordered dc motor to rotate.The dc motor connected to gear of wheelchair using chain. So when the dc motor rotated the wheelchair rotated as well. Controlling of DC motor used PID control method. Input encoder was used as feedback for PID control at each wheel.From the experimental results concentration level data of the human brain waves can be used to adjust the rate of speed of the wheelchair. The level accuracy of respons Fuzzy method ton system obtained by devide total true respons data with total tested data and the result is 85.71 %. Wheelchairs can run at a maximum speed of 31.5 cm/s when the battery voltage is more than 24.05V. Moreover, the maximum load of wheelchair is 110 kg.

Collaboration network of the authors

40 authors · 97 co-authorship links · 27 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Telkom University
  • Bandung Institute of Technology
  • Universitas Gadjah Mada
  • Institut Teknologi Telkom Purwokerto
  • Mohammed V University
  • Institut Teknologi dan Sains Mandala
  • INTI International University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Indrarini Dyah IrawatiTelkom University5
Yuli Sun HariyaniTelkom University4
Achmad RizalTelkom University3
Suci AuliaTelkom University2
Inung WijayantoTelkom University2
Dadan Nur RamadanTelkom University2
Vera SuryaniTelkom University1
Jondri JondriTelkom University1
L. D. IrawatiTelkom University1
R. R. AdiputraTelkom University1
Kridanto SurendroBandung Institute of Technology1
Heru NugrohoUniversitas Gadjah Mada1
Tati Latifah Erawati RajabBandung Institute of Technology1
Rahmat WidadiInstitut Teknologi Telkom Purwokerto1
Hilman FauziTelkom University1
Said ZianiMohammed V University1
Ahmad Zaky RamdaniBandung Institute of Technology1
Agung MuliawanInstitut Teknologi dan Sains Mandala1
Rizky Aulia RahmanTelkom University1
Siti Sarah MaidinINTI International University1
Gelar BudimanTelkom University1
Lutvi Murdiansyah MurdiansyahTelkom University1
A. V. Senthil KumarAffiliation unknown1
Suyatno SuyatnoUniversitas Ahmad Dahlan1
Akhmad AlfaruqTelkom University1
Tasya ChairunnisaTelkom University1
Muhamad RoihanTelkom University1
Nurista Wahyu KiranaUniversity of Brawijaya1
Ervin Masita DewiAffiliation unknown1
Vanesha Putri AnggitaAffiliation unknown1
Yana SudarsaAffiliation unknown1
Dodi Budiman MarganaAffiliation unknown1
Dieny Rofiatul MardiyahTelkom University1
Asril IbrahimTelkom University1
Lyra Vega UgiTelkom University1
Fiky Yosef SuratmanTelkom University1
R. Bagus WicaksonoTelkom University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 22 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and Implementation of Wheelchair Controller Based Electroencephalogram Signal using Microcontroller</dc:title><dc:creator>Arzak, M. I.</dc:creator><dc:creator>Sunarya, U.</dc:creator><dc:creator>Hadiyoso, S.</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;Wheelchair is a medical device that can help patients, especially for persons with physical disabilities. In this research has designed a wheelchair that can be controlled using brain wave. Mind wave device is used as a sensor to capture brain waves. Fuzzy method is used to process data from mind wave. In the design was used a modified wheelchair (original wheelchair modified with addition dc motor that can be control using microcontroller ). After processing data from mindwave using fuzzy method, then microcontroller ordered dc motor to rotate.The dc motor connected to gear of wheelchair using chain. So when the dc motor rotated the wheelchair rotated as well.  Controlling of DC motor used PID control method. Input encoder was used as feedback for PID control at each wheel.From the experimental results concentration level data of the human brain waves can be used to adjust the rate of speed of the wheelchair. The level accuracy of respons Fuzzy method ton system obtained by devide total true respons data with total tested data and the result is 85.71 %.  Wheelchairs can run at a maximum speed of 31.5 cm/s when the battery voltage is more than 24.05V. Moreover, the maximum load of wheelchair is 110 kg.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i6.11452</dc:identifier><dc:identifier>10.11591/ijece.v6i6.11452</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 6 (2016); 2878</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://www.iaescore.com/journals/index.php/IJECE/article/viewFile/5902/5685</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights></oai_dc:dc>