Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Characterization of Defect Induced Multilayer Graphene

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 7 No. 3 (2017)

DOI
10.11591/ijece.v7i3.pp1452-1458
ISSN
2088-8708, 2088-8708
Published
2017-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

A study of oxygen plasma on multilayer graphene is done with different flow rates. This is to allow a controlled amount of defect fabricated on the graphene. Results from the study showed that the intensity ratio of defect between D peak and G peak was strongly depended on the amount of oxygen flow rate thus affected the 2D band of the spectra. The inter-defect distance L D ≥ 15 nm of each sample indicated that low-defect density was fabricated. The surface roughness of the multilayer graphene also increased and reduced the conductivity of the multilayer graphene.

Collaboration network of the authors

7 authors · 11 co-authorship links · 7 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Technology Malaysia
  • Universitas Islam Negeri Ar-Raniry
  • Kementerian Pendidikan Malaysia
  • Tun Hussein Onn University of Malaysia
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Tze Weng OwUniversity of Technology Malaysia2
Sri NengsihUniversitas Islam Negeri Ar-Raniry1
Rangga Rio Pratama PaneUniversitas Islam Negeri Ar-Raniry1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Characterization of Defect Induced Multilayer Graphene</dc:title><dc:creator>Morsin, Marriatyi</dc:creator><dc:creator>Isaak, Suhaila</dc:creator><dc:creator>Morsin, Marlia</dc:creator><dc:creator>Yusof, Yusmeeraz</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p class="Abstract"&amp;gt;A study of oxygen plasma on multilayer graphene is done with different flow rates. This is to allow a controlled amount of defect fabricated on the graphene. Results from the study showed that the intensity ratio of defect between D peak and G peak was strongly depended on the amount of oxygen flow rate thus affected the 2D band of the spectra. The inter-defect distance L&amp;lt;sub&amp;gt;D &amp;lt;/sub&amp;gt;≥ 15 nm of each sample indicated that low-defect density was fabricated. The surface roughness of the multilayer graphene also increased and reduced the conductivity of the multilayer graphene.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2017-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v7i3.pp1452-1458</dc:identifier><dc:identifier>10.11591/ijece.v7i3.pp1452-1458</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 7 No 3 (2017); 1452</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/7509/8440</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>