Penggunaan Job Hazard Analysis dalam Identifikasi Risiko Keselamatan Kerja pada Pengrajin Logam

Azady, Al Asyhar Aahyu; Widowati, Evi; Rahayu, Sri Ratna

doi:10.15294/higeia.v2i4.23564

Journal

Penggunaan Job Hazard Analysis dalam Identifikasi Risiko Keselamatan Kerja pada Pengrajin Logam

HIGEIA (Journal of Public Health Research and Development) · Vol. 2 No. 4 (2018) · pp. 510–519

DOI: 10.15294/higeia.v2i4.23564
ISSN: 2541-5581, 2541-5603
Published: 2018-10-31
Publisher: Universitas Negeri Semarang
Language: eng

Abstract

Abstrak Setiap tempat kerja selalu mempunyai risiko kemungkinan terjadinya kecelakaan dan penyakit akibat kerja. Pada tahun 2013 telah terjadi 406 kasus kecelakaan kerja di Kabupaten Boyolali, 372 pekerja (91,6%) berhasil sembuh, 25 pekerja (6,1%) sementara tidak mampu bekerja, 4 pekerja (0,9%) mengalami cacat, dan 5 pekerja (1,2%) meninggal dunia. Insiden kecelakaan dan cedera di tempat kerja dapat dikurangi dengan penggunaan Job Hazard Analysis. Penelitian ini dilaksanakan pada tahun 2018. Tujuan dari penelitian ini adalah untuk mengetahui potensi bahaya serta pengendalian yang tepat pada industri logam UD. A&D dengan metode Job Hazard Analysis. Jenis penelitian ini adalah deskriptif kualitatif dengan pendekatan observasional. Hasil penelitian menunjukkan terdapat 46 bahaya dan 82 risiko yang teridentifikasi. Hasil penilaian risiko terdapat 24 (29,6%) risiko rendah, 27 (32,9%) risiko sedang dan risiko tinggi berjumlah 31 (37,8%). Hasil penilaian dan pengendalian risiko dirancang dalam bentuk form Job Hazard Analysis. Kesimpulan penelitian ini adalah potensi bahaya yang ada belum dilakukan pengendalian secara optimal. Abstract Each workplace always has a risk of possible accidents and occupational diseases. In 2013 there were 406 work accident cases in Boyolali District, 372 workers (91.6%) recovered, 25 workers (6.1%) were unable to work, 4 workers (0.9%) were disabled, and 5 workers (1.2%) died. Incidents of accidents and workplace injuries can be reduced by the use of Job Hazard Analysis. This research was conducted in 2018. The purpose of this research is to know the potential danger and proper control on UD metal industry. A & D with Job Hazard Analysis method. The type of this research is descriptive qualitative with observational approach.The results showed 46 hazards and 82 identified risks. Risk assessment results were 24 (29.6%) low risk, 27 (32.9%) medium and high risk 31 (37.8%). The results of risk assessment and control are designed in the form of Job Hazard Analysis form. The conclusion of this research is the potential hazard that has not been done optimally. Keyword: Job Hazard Analysis (JHA), Potential Hazard, Risk Analysis

Collaboration network of the authors

15 authors · 19 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

State University of Semarang
Affiliation unknown

Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles

Show as table

Co-author	Organisation	Joint articles
Anik Setyo Wahyuningsih	State University of Semarang	1
Fitri Indrawati	State University of Semarang	1
Ummi Nur Laila Sulistyani	State University of Semarang	1
Rizky Dwi Prasetyo	State University of Semarang	1
Ari Yuniastuti	State University of Semarang	1
Sumarti Sumarti	State University of Semarang	1
Hasna Alyarizqina	State University of Semarang	1
Legal Yuniar Sabrina	State University of Semarang	1
Silfadhilla Ananda Prasetyo	State University of Semarang	1
Muhammad Zulfikar Ardiansyah	State University of Semarang	1
Viona Mona Indriany Korwa	State University of Semarang	1
Rizal Adi Nugroho	Affiliation unknown	1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/sju/index.php/higeia/oai, first harvested 5 Nov 2026, last seen 8 Nov 2026.

Original metadata (oai_dc)

<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Penggunaan Job Hazard Analysis dalam Identifikasi Risiko Keselamatan Kerja pada Pengrajin Logam</dc:title>
	<dc:creator>Azady, Al Asyhar Aahyu</dc:creator>
	<dc:creator>Widowati, Evi</dc:creator>
	<dc:creator>Rahayu, Sri Ratna</dc:creator>
	<dc:description xml:lang="en-US">Abstrak
Setiap tempat kerja selalu mempunyai risiko kemungkinan terjadinya kecelakaan dan penyakit akibat kerja. Pada tahun 2013 telah terjadi 406 kasus kecelakaan kerja di Kabupaten Boyolali, 372 pekerja (91,6%) berhasil sembuh, 25 pekerja (6,1%) sementara tidak mampu bekerja, 4 pekerja (0,9%) mengalami cacat, dan 5 pekerja (1,2%) meninggal dunia. Insiden kecelakaan dan cedera di tempat kerja dapat dikurangi dengan penggunaan Job Hazard Analysis. Penelitian ini dilaksanakan pada tahun 2018. Tujuan dari penelitian ini adalah untuk mengetahui potensi bahaya serta pengendalian yang tepat pada industri logam UD. A&amp;amp;D dengan metode Job Hazard Analysis. Jenis penelitian ini adalah deskriptif kualitatif dengan pendekatan observasional. Hasil penelitian menunjukkan terdapat 46 bahaya dan 82 risiko yang teridentifikasi. Hasil penilaian risiko terdapat 24 (29,6%) risiko rendah, 27 (32,9%) risiko sedang dan risiko tinggi berjumlah 31 (37,8%). Hasil penilaian dan pengendalian risiko dirancang dalam bentuk form Job Hazard Analysis. Kesimpulan penelitian ini adalah potensi bahaya yang ada belum dilakukan pengendalian secara optimal.
&amp;nbsp;Abstract
Each workplace always has a risk of possible accidents and occupational diseases. In 2013 there were 406 work accident cases in Boyolali District, 372 workers (91.6%) recovered, 25 workers (6.1%) were unable to work, 4 workers (0.9%) were disabled, and 5 workers (1.2%) died. Incidents of accidents and workplace injuries can be reduced by the use of Job Hazard Analysis. This research was conducted in 2018. The purpose of this research is to know the potential danger and proper control on UD metal industry. A &amp;amp; D with Job Hazard Analysis method. The type of this research is descriptive qualitative with observational approach.The results showed 46 hazards and 82 identified risks. Risk assessment results were 24 (29.6%) low risk, 27 (32.9%) medium and high risk 31 (37.8%). The results of risk assessment and control are designed in the form of Job Hazard Analysis form. The conclusion of this research is the potential hazard that has not been done optimally. 
Keyword :&amp;nbsp;Job Hazard Analysis (JHA), Potential Hazard, Risk Analysis</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2018-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:type xml:lang="en-US">text</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/sju/higeia/article/view/23564</dc:identifier>
	<dc:identifier>10.15294/higeia.v2i4.23564</dc:identifier>
	<dc:source xml:lang="en-US">HIGEIA (Journal of Public Health Research and Development); Vol 2 No 4 (2018): HIGEIA; 510-519</dc:source>
	<dc:source>2541-5581</dc:source>
	<dc:source>2541-5603</dc:source>
	<dc:source>10.15294/higeia.v2i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/sju/higeia/article/view/23564/11797</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 HIGEIA (Journal of Public Health Research and Development)</dc:rights>
</oai_dc:dc>