Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

A Novel Three Phase Multilevel Inverter with Single Dc Link For Induction Motor Drive Applications

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 8 No. 2 (2018)

DOI
10.11591/ijece.v8i2.pp763-770
ISSN
2088-8708, 2088-8708
Published
2018-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

All industrial drives need a controlled output and it can be achieved by controlling the input supply. In this regard, the inverter circuit plays an important role in the applications of industrial drives. The industrial drives are operated at high rated power and the conventional inverters cannot be applicable for high power demands because of the large dV/dt (rate of change of voltage) and more switching losses. Therefore, multilevel inverters are introduced for high power-medium voltage applications. For all AC drives the MLIs are reliable in operation. This MLI topology also reduces the harmonics and bearings stress of a motor with low dV/dt. In most applications multilevel inverters are used because we can get more number of voltage levels. To increase the number of voltage levels, circuit needs to have more switches. But, we have to optimize the switch count and switching operations. The power level of the inverter is limited due to high currents and stress. In this paper, we proposed a new circuit topology which enables the switches to be active at different voltage levels, causes reduction of the switching losses and also increases the efficiency of the inverter. In this we have presented two configurations for an eleven level MLI for three phase induction motor drive application. In this an individual DC source is connected for each bridge circuit of each phase in one configuration and only one common DC link is used for three phases in another configuration. With this the size, cost and complexity could be decreased. In both the configurations the controlled output of the inverter is connected to the induction motor drive. The circuits are modeled using Matlab/simulink software and corresponding output waveforms are analyzed for both configurations.

Collaboration network of the authors

5 authors · 6 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Koneru Lakshmaiah Education Foundation
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Yeluripati Lalitha KameswariKoneru Lakshmaiah Education Foundation2
Adireddy RameshKoneru Lakshmaiah Education Foundation2

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A Novel Three Phase Multilevel Inverter with Single Dc Link For Induction Motor Drive Applications</dc:title><dc:creator>Ramesh, A.</dc:creator><dc:creator>Sekhar, O. Chandra</dc:creator><dc:creator>Siva Kumar, M.</dc:creator><dc:description>&lt;jats:p&gt;All industrial drives need a controlled output and it can be achieved by controlling the input supply. In this regard, the inverter circuit plays an important role in the applications of industrial drives. The industrial drives are operated at high rated power and the conventional inverters cannot be applicable for high power demands because of the large dV/dt (rate of change of voltage) and more switching losses. Therefore, multilevel inverters are introduced for high power-medium voltage applications. For all AC drives the MLIs are reliable in operation. This MLI topology also reduces the harmonics and bearings stress of a motor with low dV/dt. In most applications multilevel inverters are used because we can get more number of voltage levels. To increase the number of voltage levels, circuit needs to have more switches. But, we have to optimize the switch count and switching operations. The power level of the inverter is limited due to high currents and stress. In this paper, we proposed a new circuit topology which enables the switches to be active at different voltage levels, causes reduction of the switching losses and also increases the efficiency of the inverter. In this we have presented two configurations for an eleven level MLI for three phase induction motor drive application. In this an individual DC source is connected for each bridge circuit of each phase in one configuration and only one common DC link is used for three phases in another configuration. With this the size, cost and complexity could be decreased. In both the configurations the controlled output of the inverter is connected to the induction motor drive. The circuits are modeled using Matlab/simulink software and corresponding output waveforms are analyzed for both configurations.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2018-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v8i2.pp763-770</dc:identifier><dc:identifier>10.11591/ijece.v8i2.pp763-770</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 8 No 2 (2018); 763</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/8393/8317</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>