Melola Discovery

← Melola Discovery

Open access Journal

Risk Assessment, Risk Identification, and Control in The Process Of Steel Smelting Using the Hiradc Method

APTISI Transactions on Management (ATM) · Vol. 7 No. 3 (2023) · pp. 254–265

DOI
10.33050/atm.v7i3.2142
ISSN
2622-6804, 2622-6812
Published
2023-09-27
Publisher
Pandawan
Language
en
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Workplace accidents include illnesses brought on by working conditions, accidents on the way to and from work,and other incidents. Steel smelting, an operation that involves melting steel to produce an iron rod (billet), which issubsequently molded into different materials needed, is one of the work environments where accidents can happenwith risks ranging from low to severe. Using the HIRADC approach, work safety can undoubtedly be evaluated.Using a scale based on the potential outcome, this method can identify the risks, dangers, and assessments that mayarise throughout the steel-smelting process. The HIRADC approach will be used in this study to identify risks andgauge the likelihood of accidents in the Indonesian steel smelting process. As a result, 36 dangers with varyinglevels of low, medium, and high risk exist. Various additional safety tools must be owned because Indonesia's levelof safety control is still quite poor

Keywords

Collaboration network of the authors

40 authors · 134 co-authorship links · 6 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Raharja
  • Satya Wacana Christian University
  • Gunadarma University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Qurotul AiniUniversitas Raharja18
Ninda LutfianiUniversitas Raharja8
Irwan SembiringSatya Wacana Christian University6
Danny ManonggaSatya Wacana Christian University6
Po Abas SunaryaAffiliation unknown4
Alfiah KhoirunisaUniversitas Raharja3
Dwi ApriliasariAffiliation unknown3
Muhtarom MuhtaromAffiliation unknown3
Agung RizkyAffiliation unknown3
Sutarto WijonoAffiliation unknown3
Shofiyul MillahAffiliation unknown3
Desy AprianiAffiliation unknown2
Mohamad RakhmansyahAffiliation unknown2
Ihsan Nuril HikamAffiliation unknown2
Adam FaturahmanAffiliation unknown2
Nuke Puji Lestari SantosoUniversitas Raharja2
Natasya Aprila YusufAffiliation unknown2
Umi NarimawatiAffiliation unknown2
Joko SiswantoAffiliation unknown2
Hindriyanto Dwi PurnomoSatya Wacana Christian University2
Alexander WilliamsAffiliation unknown1
Sella AvionitaAffiliation unknown1
Dini HidayatiAffiliation unknown1
Andriyansah AndriyansahAffiliation unknown1
Galih Putra CesnaAffiliation unknown1
Ahmad Yadi FauziAffiliation unknown1
Achmad Benny MutiaraGunadarma University1
Prihandoko PrihandokoGunadarma University1
Charlotte PashaAffiliation unknown1
Nur AzizahAffiliation unknown1
Muhammad Hasbullah KadimAffiliation unknown1
Abdul KadimAffiliation unknown1
Muhammad Faizal FazriAffiliation unknown1
Nikita IvanovAffiliation unknown1
Brigitta CallulaAffiliation unknown1
Nur AzizahAffiliation unknown1
Raihan RaihanAffiliation unknown1
Marviola HardiniAffiliation unknown1
Aan KaniviaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ijc.ilearning.co/ATM/oai, first harvested 6 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Risk Assessment, Risk Identification, and Control in The Process Of Steel Smelting Using the Hiradc Method</dc:title>
	<dc:creator xml:lang="en">Rahardja, Untung</dc:creator>
	<dc:subject xml:lang="en">smelting steel</dc:subject>
	<dc:subject xml:lang="en">workplace accidents</dc:subject>
	<dc:subject xml:lang="en">HIRADC</dc:subject>
	<dc:description xml:lang="en">Workplace accidents include illnesses brought on by working conditions, accidents on the way to and from work,and other incidents. Steel smelting, an operation that involves melting steel to produce an iron rod (billet), which issubsequently molded into different materials needed, is one of the work environments where accidents can happenwith risks ranging from low to severe. Using the HIRADC approach, work safety can undoubtedly be evaluated.Using a scale based on the potential outcome, this method can identify the risks, dangers, and assessments that mayarise throughout the steel-smelting process. The HIRADC approach will be used in this study to identify risks andgauge the likelihood of accidents in the Indonesian steel smelting process. As a result, 36 dangers with varyinglevels of low, medium, and high risk exist. Various additional safety tools must be owned because Indonesia's levelof safety control is still quite poor</dc:description>
	<dc:publisher xml:lang="en">Pandawan</dc:publisher>
	<dc:date>2023-09-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijc.ilearning.co/ATM/article/view/2142</dc:identifier>
	<dc:identifier>10.33050/atm.v7i3.2142</dc:identifier>
	<dc:source xml:lang="en">APTISI Transactions on Management (ATM); Vol. 7 No. 3 (2023): September; 254-265</dc:source>
	<dc:source xml:lang="id">APTISI Transactions on Management (ATM); Vol 7 No 3 (2023): September; 254-265</dc:source>
	<dc:source>2622-6804</dc:source>
	<dc:source>2622-6812</dc:source>
	<dc:source>10.33050/atm.v7i3</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://ijc.ilearning.co/ATM/article/view/2142/778</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Untung Rahardja (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>