Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

On the Design and Development of a Zigbee-Based Multimodal Input-Output Monitoring-Actuating System

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 5 No. 5 (2015)

DOI
10.11591/ijece.v5i5.pp1143-1152
ISSN
2088-8708, 2088-8708
Published
2015-10-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

The monitoring of a physically challenged patient’s activities is a crucial and difficult task for the medical professionals. The design and development of a multimodal- input and output wireless system with two sensors and three actuators that can be used for just monitoring or for both monitoring and stimulating are discussed in this research. Touch and tilt sensors at the input part of the system attached to Zigbee modules communicate in a wireless manner with voice, vibration and light actuators connected to Zigbee modules at the output part. The hardware and the software parts are designed and integrated in such a way that a new sensor at the input or a new actuator at the output can be included or excluded based on the needs of the patient. It is shown how to design and develop sensors. In an application programming interface communication mode, 3 XBee series 1 modules send and receive data in a wireless manner. The prototype of the system was tested with promising results in the case of the patients with inattention disorder. This system can be used for monitoring the activities of a patient and also for actuating certain stimulus in the patient side in case of necessity.

Collaboration network of the authors

7 authors · 15 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Fujita Health University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Genichi TaninoFujita Health University4
Hiroyuki MiyasakaFujita Health University4
Kotaro TakedaFujita Health University4

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>On the Design and Development of a Zigbee-Based Multimodal Input-Output Monitoring-Actuating System</dc:title><dc:creator>Orand, Abbas</dc:creator><dc:creator>Tomita, Y.</dc:creator><dc:creator>Okamoto, Sayaka</dc:creator><dc:creator>Sonoda, Shigeru</dc:creator><dc:description>&lt;jats:p&gt;The monitoring of a physically challenged patient’s activities is a crucial and difficult task for the medical professionals. The design and development of a multimodal- input and output wireless system with two sensors and three actuators that can be used for just monitoring or for both monitoring and stimulating are discussed in this research. Touch and tilt sensors at the input part of the system attached to Zigbee modules communicate in a wireless manner with voice, vibration and light actuators connected to Zigbee modules at the output part. The hardware and the software parts are designed and integrated in such a way that a new sensor at the input or a new actuator at the output can be included or excluded based on the needs of the patient. It is shown how to design and develop sensors. In an application programming interface communication mode, 3 XBee series 1 modules send and receive data in a wireless manner. The prototype of the system was tested with promising results in the case of the patients with inattention disorder. This system can be used for monitoring the activities of a patient and also for actuating certain stimulus in the patient side in case of necessity.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2015-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v5i5.pp1143-1152</dc:identifier><dc:identifier>10.11591/ijece.v5i5.pp1143-1152</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 5 No 5 (2015); 1143</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/5736/4613</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>