Melola Discovery

← Melola Discovery

Journal

Strength Analysis of Rollers and Supports of A Hydraulic Dynamometer Chassis Using Finite Element Method

Jurnal Inovasi Mesin · Vol. 6 No. 1 (2024) · pp. 1–8

DOI
10.15294/jim.v6i1.8961
ISSN
2746-7694
Published
2024-04-20
Publisher
Universitas Negeri Semarang
Language
eng

Abstract

The measuring performance tool of electric motorcycle in Indonesia is limited, which in contrast to the rapid development of motorcycle technology. Therefore, this study aims to develop a chassis hydraulic dynamometer as a tool to measure the mechanical parameters of electric motorcycles This research was conducted using an experimental method based on simulations with SolidWorks 2022 software as the simulation tool for roller and support strength. Simulation was performed on variations 35 mm, 40 mm, and 45 mm shaft diameter roller, using AISI 1045 steel material. Based on calculations and simulation results, a roller with a 35 mm shaft diameter can withstand the applied external load with a maximum von Mises stress of 2,394 x 108 N/m2², a maximum strain of 7,283 x 10-4, a maximum displacement of 6,275 x 10-2 mm, and a minimum safety factor of 2.2. Based on calculations and simulation results, the roller with a 35 mm shaft diameter is safe, optimal, and efficient in terms of material usage. Therefore, a roller with a 35 mm shaft diameter and SKF UCP 207 support was selected for use on the chassis hydraulic dynamometer

Keywords

Collaboration network of the authors

36 authors · 78 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Karnowo KarnowoAffiliation unknown3
Samsudin AnisAffiliation unknown2
Sunyoto SunyotoAffiliation unknown2
SunyotoAffiliation unknown1
Setiawan HendartoAffiliation unknown1
M. Lutfi Zaeni FAffiliation unknown1
M. KhumaediAffiliation unknown1
AbdurrahmanAffiliation unknown1
Sudik -Affiliation unknown1
Assa Affitra Ilham AlifianAffiliation unknown1
Andri SetiyawanAffiliation unknown1
Samuel Julianto PurbaAffiliation unknown1
Haris NubliAffiliation unknown1
Muhammad Hafiz IzzuddinAffiliation unknown1
Muthaharussayidun MuthaharussayidunAffiliation unknown1
Muhammad Riza FahleviAffiliation unknown1
Lutfi Hery SetiawanAffiliation unknown1
Cahyo Budi WicaksonoAffiliation unknown1
David Bayu WinarkoAffiliation unknown1
Adree Gumilang SukmanaAffiliation unknown1
Kristian WibisonoAffiliation unknown1
Widi WidayatAffiliation unknown1
Candra Wahyu SportyawanAffiliation unknown1
Wirawan SumbodoAffiliation unknown1
Rahmat Doni WidodoAffiliation unknown1
syahwal fajarAffiliation unknown1
Aldias BahatmakaAffiliation unknown1
Indra Nurul HidayatAffiliation unknown1
Juwita Ria RumondangAffiliation unknown1
Fedrik Immanuel RumapeaAffiliation unknown1
Ahmad Khusom KurniawanAffiliation unknown1
Anwar Widjaya KusumaAffiliation unknown1
Esa ApriaskarAffiliation unknown1
Michael Putra Julian ValentinoAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jim/oai, first harvested 6 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Strength Analysis of Rollers and Supports of A Hydraulic Dynamometer Chassis Using Finite Element Method</dc:title>
	<dc:creator xml:lang="en">Bagaskoro, Satria</dc:creator>
	<dc:creator xml:lang="en">Aryadi, Widya</dc:creator>
	<dc:subject xml:lang="en">Chassis hydraulic dynamometer</dc:subject>
	<dc:subject xml:lang="en">Electric  Motorcycle </dc:subject>
	<dc:subject xml:lang="en">Roller Bearing</dc:subject>
	<dc:description xml:lang="en">The measuring performance tool of electric motorcycle in Indonesia is limited, which in contrast to the rapid development of motorcycle technology. Therefore, this study aims to develop a chassis hydraulic dynamometer as a tool to measure the mechanical parameters of electric motorcycles This research was conducted using an experimental method based on simulations with SolidWorks 2022 software as the simulation tool for roller and support strength. Simulation was performed on variations 35 mm, 40 mm, and 45 mm shaft diameter roller, using AISI 1045 steel material. Based on calculations and simulation results, a roller with a 35 mm shaft diameter can withstand the applied external load with a maximum von Mises stress of 2,394 x 108 N/m2², a maximum strain of 7,283 x 10-4, a maximum displacement of 6,275 x 10-2 mm, and a minimum safety factor of 2.2. Based on calculations and simulation results, the roller with a 35 mm shaft diameter is safe, optimal, and efficient in terms of material usage. Therefore, a roller with a 35 mm shaft diameter and SKF UCP 207 support was selected for use on the chassis hydraulic dynamometer</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2024-04-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jim/article/view/8961</dc:identifier>
	<dc:identifier>10.15294/jim.v6i1.8961</dc:identifier>
	<dc:source xml:lang="en">Jurnal Inovasi Mesin; Vol. 6 No. 1 (2024): APRIL 2024; 1-8</dc:source>
	<dc:source>2746-7694</dc:source>
	<dc:source>10.15294/jim.v6i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jim/article/view/8961/3602</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Jurnal Inovasi Mesin</dc:rights>
</oai_dc:dc>