Melola Discovery

← Melola Discovery

Journal

MESIN PEMBAKARAN PIROLISIS BERBAHAN DASAR SEKAM PADI DAN SABUT KELAPA PENGHASIL ASAP CAIR

Jurnal Inovasi Mesin · Vol. 4 No. 1 (2022) · pp. 29–36

DOI
10.15294/jim.v4i1.64926
ISSN
2746-7694
Published
2022-04-22
Publisher
Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang
Language
eng

Abstract

This study aims to obtain smoke gas through pyrolysis technology by processing biomass materials around us, as well as knowing the effect of increasing the pyrolysator temperature on the capacity of the smoke gas produced and the content in the biomass smoke gas. The combustion process in the combustion tube uses the pyrolysis method or combustion with low oxygen levels or does not use oxygen. This second concept uses additional distillation methods to improve the quality of the liquid smoke produced. The third product concept has a combined design of the two previous concepts. This third concept uses the concept of three phase changes using two condenser tubes and one distillation tube.

Collaboration network of the authors

37 authors · 102 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • State University of Semarang
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Rizqi Fitri NaryantoAffiliation unknown2
Fiqri Fadillah FahmiAffiliation unknown2
Karnowo KarnowoAffiliation unknown2
Widya Hary CahyatiAffiliation unknown1
Natalia Desy PutriningtyasAffiliation unknown1
Sucihatiningsih Dian Wisika PrajantiState University of Semarang1
Herlin PujiartiAffiliation unknown1
Markus DiantoroAffiliation unknown1
Prihatini RetnaningsihAffiliation unknown1
Lee Sang WonAffiliation unknown1
Nauval Wildan FachreziAffiliation unknown1
Dwi FajarAffiliation unknown1
Muhammad Haris ShidiqAffiliation unknown1
I Wayan Adi WidyarsaAffiliation unknown1
Godham Eko SaputroAffiliation unknown1
Sunyoto SunyotoAffiliation unknown1
Wara Dyah Pita RenggaAffiliation unknown1
Irawaty IrawatyAffiliation unknown1
Muhammad Yusuf WibowoAffiliation unknown1
Andi Abdullah GhyferiAffiliation unknown1
Joung Hyoung ChoAffiliation unknown1
Widya AryadiAffiliation unknown1
Indra Nurul HidayatAffiliation unknown1
Juwita Ria RumondangAffiliation unknown1
Fedrik Immanuel RumapeaAffiliation unknown1
Ahmad Khusom KurniawanAffiliation unknown1
Anwar Widjaya KusumaAffiliation unknown1
Sonika MaulanaAffiliation unknown1
Danang Dwi SaputroAffiliation unknown1
Fajar Rizqi Sandi PratamaAffiliation unknown1
Muklis AminAffiliation unknown1
Cho Joung HyungAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/sju/index.php/jim/oai, first harvested 6 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">MESIN PEMBAKARAN PIROLISIS BERBAHAN DASAR SEKAM PADI DAN SABUT KELAPA PENGHASIL ASAP CAIR</dc:title>
	<dc:creator>Saputra, Raditya Dharma</dc:creator>
	<dc:creator>Bahatmaka, Aldias</dc:creator>
	<dc:creator>Mahendra, Rajasa Wido</dc:creator>
	<dc:creator>Trisnawan, Dimas</dc:creator>
	<dc:creator>Marwoto, Suwandi</dc:creator>
	<dc:description xml:lang="en-US">This study aims to obtain smoke gas through pyrolysis technology by processing biomass materials around us, as well as knowing the effect of increasing the pyrolysator temperature on the capacity of the smoke gas produced and the content in the biomass smoke gas. The combustion process in the combustion tube uses the pyrolysis method or combustion with low oxygen levels or does not use oxygen. This second concept uses additional distillation methods to improve the quality of the liquid smoke produced. The third product concept has a combined design of the two previous concepts. This third concept uses the concept of three phase changes using two condenser tubes and one distillation tube.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang</dc:publisher>
	<dc:date>2022-04-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/sju/jim/article/view/64926</dc:identifier>
	<dc:identifier>10.15294/jim.v4i1.64926</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Inovasi Mesin; Vol 4 No 1 (2022): APRIL 2022; 29-36</dc:source>
	<dc:source>2746-7694</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/sju/jim/article/view/64926/23483</dc:relation>
</oai_dc:dc>