Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Subthreshold swing model using scale length for sub-10 nm junction-based double-gate MOSFETs

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 2 (2020)

DOI
10.11591/ijece.v10i2.pp1747-1754
ISSN
2088-8708, 2088-8708
Published
2020-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

We propose an analytical model for subthreshold swing using scale length for sub-10 nm double gate (DG) MOSFETs. When the order of the calculation for the series type potential distribution is increased it is possible to obtain accuracy, but there is a problem that the calculation becomes large. Using only the first order calculation of potential distribution, we derive the scale length λ1 and use it to obtain an analytical model of subthreshold swing. The findings show this subthreshold swing model is in concordance with a 2D simulation. The relationship between the channel length and silicon thickness, which can analyze the subthreshold swing using λ1, is derived by the relationship between the scale length and the geometric mean of the silicon and oxide thickness. If the silicon thickness and oxide film thickness satisfy the condition of (Lg-0.215)/6.38 > tsi(=tox), it is found that the result of this model agrees with the results using higher order calculations, within a 4% error range.

Collaboration network of the authors

2 authors · 1 co-authorship link

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Kunsan National University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Byungon KimKunsan National University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Subthreshold swing model using scale length for sub-10 nm junction-based double-gate MOSFETs</dc:title><dc:creator>Jung, Hakkee</dc:creator><dc:description>&lt;jats:p&gt;We propose an analytical model for subthreshold swing using scale length for sub-10 nm double gate (DG) MOSFETs. When the order of the calculation for the series type potential distribution is increased it is possible to obtain accuracy, but there is a problem that the calculation becomes large. Using only the first order calculation of potential distribution, we derive the scale length λ1 and use it to obtain an analytical model of subthreshold swing. The findings show this subthreshold swing model is in concordance with a 2D simulation. The relationship between the channel length and silicon thickness, which can analyze the subthreshold swing using λ1, is derived by the relationship between the scale length and the geometric mean of the silicon and oxide thickness. If the silicon thickness and oxide film thickness satisfy the condition of (Lg-0.215)/6.38 &amp;gt; tsi(=tox), it is found that the result of this model agrees with the results using higher order calculations, within a 4% error range.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i2.pp1747-1754</dc:identifier><dc:identifier>10.11591/ijece.v10i2.pp1747-1754</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 2 (2020); 1747</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/20498/pdf</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>