Melola Discovery

← Melola Discovery

Journal

PENGARUH VARIASI SUDUT POTONG MAYOR TERHADAP KEKASARAN PERMUKAAN HASIL PROSES PEMBUBUTAN MUKA ALUMINIUM SILICON (Si) DAUR ULANG

JMEL : Journal of Mechanical Engineering Learning · Vol. 9 No. 1 (2020)

ISSN
2252-651X, 2252-651X
Published
2020-08-19
Publisher
Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Semarang
Language
eng

Abstract

Non-conventional machining technology becomes a solution to reduce the inefficiency of production time and is required when conventional machines are deemed unable to work on a workpiece with complex and very detailed contours. In the process of machining requires a chisel that works as a means of cutting workpiece. The quality of the lathe can be viewed in many ways including the smoothness of the workpiece surface roughness. Variation of major side edge cutting angle on HSS cutting tool used in this study was 75 °, 77 ° and 80 °. While the dependent variable to be studied is surface roughness. Method of data processing is done by descriptive analysis. The results showed that the larger cutting angle and larger spindle rotation resulted in lower surface roughness. The highest arithmetic mean roughness (Ra) value of 10.782 μm is generated from the major side edgecutting-edge parameters of 75 °, and 293 rpm rotation. While the parameters of cutting angle major 80 °, and round 1480 rpm obtained the lowest surface arithmetic mean value (Ra) of 5.361 μm.

Collaboration network of the authors

40 authors · 113 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Rizki SetiadiAffiliation unknown8
KriswantoAffiliation unknown2
Rizqi Fitri NaryantoAffiliation unknown2
Kriswanto KriswantoAffiliation unknown2
Heri YudionoAffiliation unknown2
Arif RahmadhiAffiliation unknown2
Septian Eko CahyantoAffiliation unknown1
Sonika MaulanaAffiliation unknown1
Deni Fajar FitriyanaAffiliation unknown1
Kuat NursiamAffiliation unknown1
Aldi KurniawanAffiliation unknown1
Devi IndriyaniAffiliation unknown1
Riska Eko CahyonoAffiliation unknown1
Anwar RosandiAffiliation unknown1
Ari Dwi Nur Indriawan MusyonoAffiliation unknown1
Danang Dwi SaputroAffiliation unknown1
Soesanto -Affiliation unknown1
Azas Ramang PambudiAffiliation unknown1
Dony Hidayat Al-JananAffiliation unknown1
Wahyu WidiyantoAffiliation unknown1
Pramono PramonoAffiliation unknown1
Mizani Yunistyar SantosoAffiliation unknown1
Ramelan RamelanAffiliation unknown1
Yosi RamadhanAffiliation unknown1
Rahmat Doni WidodoAffiliation unknown1
Widya AryadiAffiliation unknown1
syahwal fajarAffiliation unknown1
Febrian Arif BudimanAffiliation unknown1
Wahyudi WahyudiAffiliation unknown1
Yeri SutopoAffiliation unknown1
Johan Andric AprilianAffiliation unknown1
SunyotoAffiliation unknown1
Nurul Hadi MustofaAffiliation unknown1
Syahid Tri Kusuma Wijaya Al MuhyiAffiliation unknown1
Muhammad Khoirul AnamAffiliation unknown1
Habib BunajarAffiliation unknown1
Rofex PambudiAffiliation unknown1
Salim SalimAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/sju/index.php/jmel/oai, first harvested 6 Nov 2026, last seen 6 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PENGARUH VARIASI SUDUT POTONG MAYOR TERHADAP KEKASARAN PERMUKAAN HASIL PROSES PEMBUBUTAN MUKA ALUMINIUM SILICON (Si) DAUR ULANG</dc:title>
	<dc:creator>Isyrouddin, Faishol Aziz Isyrouddin Aziz</dc:creator>
	<dc:creator>Sumbodo, Wirawan</dc:creator>
	<dc:description xml:lang="en-US">Non-conventional machining technology becomes a solution to reduce the inefficiency of production time and is required when conventional machines are deemed unable to work on a workpiece with complex and very detailed contours. In the process of machining requires a chisel that works as a means of cutting workpiece. The quality of the lathe can be viewed in many ways including the smoothness of the workpiece surface roughness.
Variation of major side edge cutting angle on HSS cutting tool used in this study was 75 °, 77 ° and 80 °. While the dependent variable to be studied is surface roughness. Method of data processing is done by descriptive analysis.
The results showed that the larger cutting angle and larger spindle rotation resulted in lower surface roughness. The highest arithmetic mean roughness (Ra) value of 10.782 μm is generated from the major side edgecutting-edge parameters of 75 °, and 293 rpm rotation. While the parameters of cutting angle major 80 °, and round 1480 rpm obtained the lowest surface arithmetic mean value (Ra) of 5.361 μm.</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Semarang</dc:publisher>
	<dc:date>2020-08-19</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/sju/jmel/article/view/23696</dc:identifier>
	<dc:source xml:lang="en-US">JMEL : Journal of Mechanical Engineering Learning; Vol 9 No 1 (2020): Journal of Mechanical Engineering Learning</dc:source>
	<dc:source>2252-651X</dc:source>
	<dc:source>2252-651X</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/sju/jmel/article/view/23696/16704</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Journal of Mechanical Engineering Learning</dc:rights>
</oai_dc:dc>