Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

The design of IPT system for multiple kitchen appliances using class E LCCL circuit

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 4 (2020)

DOI
10.11591/ijece.v10i4.pp3483-3491
ISSN
2722-2578, 2088-8708
Published
2020-08-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Since many years ago, kitchen appliances are powered up by cable connected. This create a troublesome case as wire might tangle together and cause kitchen table messy. Due to this, wireless power technology (WPT) is introduced as its ability is to transmit power to load without physical contact. This leads to cordless solution better in safety as the product can be completely seal, highly expandable power range. This work focuses on the design of WPT based on inductive approach to power up multiple kitchen appliances. The selection of inductive approach over its partners capacitive and acoustic is mainly due to high power efficiency. Class E inverter is proposed here to convert the DC to AC current to drive the inductive link. A 1 MHz operating frequency is used. To ensure the circuit is robust with load variations, an LCCL impedance matching is proposed. This solution is table to maintain the output power if there is a slight change in load impedance. Finally, the developed prototype is able to supply 50V utput which can achieve power transmission up to 81.76%.

Collaboration network of the authors

40 authors · 136 co-authorship links · 36 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Teknologi MARA
  • Universiti Malaysia Terengganu
  • University of Auckland
  • Universiti Malaysia Perlis
  • Christian-Albrechts-Universität zu Kiel
  • University of Technology Malaysia
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Huzaimah HusinUniversiti Teknikal Malaysia Melaka13
Khairul Kamarudin HasanUniversiti Teknologi MARA9
Ahmad Husni Mohd ShapriUniversiti Malaysia Perlis7
A. A. M. IsaUniversiti Teknikal Malaysia Melaka5
F. K. A. RahmanAffiliation unknown5
Yusmarnita YusofUniversiti Teknikal Malaysia Melaka4
Cheok Yan QiUniversiti Teknikal Malaysia Melaka4
Norezmi JamalUniversiti Teknikal Malaysia Melaka4
Thoriq ZaidUniversiti Teknikal Malaysia Melaka4
Mohd Shakir Md SaatUniversiti Teknikal Malaysia Melaka4
Sing Kiong NguangUniversity of Auckland4
Muslimah MeorUniversiti Teknikal Malaysia Melaka3
Mohd Haizal JamaluddinUniversity of Technology Malaysia3
Ahmed Al-HattamiAffiliation unknown3
Nor Diyana Md SinUniversiti Teknologi MARA2
R. A. RaniUniversiti Teknikal Malaysia Melaka2
F. K. Abdul RahmanAffiliation unknown2
Amy Sarah NguUniversiti Teknikal Malaysia Melaka2
Noor Badariah AsanUniversiti Teknikal Malaysia Melaka2
Peter Adam HoeherChristian-Albrechts-Universität zu Kiel2
Masmaria Abdul MajidUniversiti Teknologi MARA2
Mohd Sufian RamliUniversiti Teknologi MARA2
Imran HindustanUniversiti Teknikal Malaysia Melaka2
M. S. M. IsaUniversiti Teknikal Malaysia Melaka2
N NabilaUniversiti Teknikal Malaysia Melaka2
Amat Amir BasariUniversiti Teknikal Malaysia Melaka2
Zamre Abdul GhaniUniversiti Teknikal Malaysia Melaka2
Zaki MustapaUniversiti Teknikal Malaysia Melaka1
Sharifah Nur Fatieha MohamadAffiliation unknown1
Nurafnida AfrizalAffiliation unknown1
Muhammad Zalani DaudAffiliation unknown1
A. M. DarsonoUniversiti Teknikal Malaysia Melaka1
O. Z. GuatAffiliation unknown1
F.K. Abdul RahmanAffiliation unknown1
Muhammad Zaki MustapaUniversiti Teknikal Malaysia Melaka1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>The design of IPT system for multiple kitchen appliances using class E LCCL circuit</dc:title><dc:creator>Yin, N. X.</dc:creator><dc:creator>Saat, Shakir</dc:creator><dc:creator>Husin, S. H.</dc:creator><dc:creator>Yusop, Y.</dc:creator><dc:creator>Awal, M. R.</dc:creator><dc:description>&lt;jats:p&gt;Since many years ago, kitchen appliances are powered up by cable connected. This create a troublesome case as wire might tangle together and cause kitchen table messy. Due to this, wireless power technology (WPT) is introduced as its ability is to transmit power to load without physical contact. This leads to cordless solution better in safety as the product can be completely seal, highly expandable power range. This work focuses on the design of WPT based on inductive approach to power up multiple kitchen appliances. The selection of inductive approach over its partners capacitive and acoustic is mainly due to high power efficiency. Class E inverter is proposed here to convert the DC to AC current to drive the inductive link. A 1 MHz operating frequency is used. To ensure the circuit is robust with load variations, an LCCL impedance matching is proposed. This solution is table to maintain the output power if there is a slight change in load impedance. Finally, the developed prototype is able to supply 50V utput which can achieve power transmission up to 81.76%.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i4.pp3483-3491</dc:identifier><dc:identifier>10.11591/ijece.v10i4.pp3483-3491</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 4 (2020); 3483</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/20412/14008</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>