The relationship of drain induced barrier lowering (DIBL) phenomenon and channel length, silicon thickness, and thicknesses of top and bottom gate oxide films is derived for asymmetric junctionless double gate (JLDG) MOSFETs. The characteristics between the drain current and the gate voltage is derived by using the potential distribution model to propose in this paper. In this case, the threshold voltage is defined as the corresponding gate voltage when the drain current is (W/L) × 10-7 A, and the DIBL representing the change in the threshold voltage with respect to the drain voltage is obtained. As a result, we observe the DIBL is proportional to the negative third power of the channel length and the second power of the silicon thickness and linearly proportional to the geometric mean of the top and bottom gate oxide thicknesses, and derive a relation such as DIBL =25.15ηL_g^(-3) t_si^2 √(t_ox1∙t_ox2 ), where η is a static feedback coefficients between 0 and 1. The η is found to be between 0.5 and 1.0 in this model. The DIBL model of this paper has been observed to be in good agreement with the result of other paper, so it can be used in circuit simulation such as SPICE.
Collaboration network of the authors
2 authors ·
1 co-authorship link
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
Kunsan National University
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.