Melola Discovery

← Melola Discovery

Journal

Arduino Controlled Automatic Capacitor Bank for Power Quality Improvement in Household Scale

Jurnal Teknik Elektro · Vol. 16 No. 2 (2024)

DOI
10.15294/jte.v16i2.33936
ISSN
2549-1571, 1411-0059
Published
2024-12-30
Publisher
LPPM Universitas Negeri Semarang
Language
eng

Abstract

The use of inductive loads on a household scale, especially in electricity customers with a power of 1300 VA, often leads to low power factor values (cos φ) which degrades power quality. This study aims to design and build an Arduino-based automatic capacitor bank system capable of dynamically improving power quality in 1300 VA household electrical installations. The system integrates an Arduino Nano microcontroller with a PZEM-004T sensor to monitor electrical parameters—such as voltage, current, and cos φ—in real time and automatically controls capacitor switching through relays to provide the most suitable compensation. Experimental results show that the system successfully increased the power factor from an average of 0.75 to 0.97 under varying load conditions. In addition, the implementation reduced reactive power by up to 65% and demonstrated potential savings in electricity bills of approximately 8–12% for household consumers. These findings indicate that the proposed system not only improves power factor close to ideal conditions (cos φ ≈ 1) but also enhances overall energy efficiency and provides tangible economic benefits for household users.

Keywords

Collaboration network of the authors

9 authors · 21 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Negeri Surabaya
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Widi AribowoUniversitas Negeri Surabaya1
Joko JokoUniversitas Negeri Surabaya1
Aditya Chandra HermawanUniversitas Negeri Surabaya1
Fendi AchmadUniversitas Negeri Surabaya1
Yuli Sutoto NugrohoUniversitas Negeri Surabaya1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jte/oai, first harvested 6 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Arduino Controlled Automatic Capacitor Bank for Power Quality Improvement in Household Scale</dc:title>
	<dc:creator xml:lang="en">Zen, Hafidz Nindhom</dc:creator>
	<dc:creator xml:lang="en">Ibrohim</dc:creator>
	<dc:creator xml:lang="en">Haryudo, Subuh Isnur</dc:creator>
	<dc:creator xml:lang="en">Endryansyah</dc:creator>
	<dc:subject xml:lang="en">power factor optimization</dc:subject>
	<dc:subject xml:lang="en">capacitor bank</dc:subject>
	<dc:subject xml:lang="en">arduino nano microcontroller</dc:subject>
	<dc:subject xml:lang="en">efficiency energy</dc:subject>
	<dc:subject xml:lang="en">electrical automation system</dc:subject>
	<dc:description xml:lang="en">The use of inductive loads on a household scale, especially in electricity customers with a power of 1300 VA, often leads to low power factor values (cos φ) which degrades power quality. This study aims to design and build an Arduino-based automatic capacitor bank system capable of dynamically improving power quality in 1300 VA household electrical installations. The system integrates an Arduino Nano microcontroller with a PZEM-004T sensor to monitor electrical parameters—such as voltage, current, and cos φ—in real time and automatically controls capacitor switching through relays to provide the most suitable compensation. Experimental results show that the system successfully increased the power factor from an average of 0.75 to 0.97 under varying load conditions. In addition, the implementation reduced reactive power by up to 65% and demonstrated potential savings in electricity bills of approximately 8–12% for household consumers. These findings indicate that the proposed system not only improves power factor close to ideal conditions (cos φ ≈ 1) but also enhances overall energy efficiency and provides tangible economic benefits for household users.</dc:description>
	<dc:publisher xml:lang="en">LPPM Universitas Negeri Semarang</dc:publisher>
	<dc:date>2024-12-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jte/article/view/33936</dc:identifier>
	<dc:identifier>10.15294/jte.v16i2.33936</dc:identifier>
	<dc:source xml:lang="en">Jurnal Teknik Elektro; Vol. 16 No. 2 (2024)</dc:source>
	<dc:source>2549-1571</dc:source>
	<dc:source>1411-0059</dc:source>
	<dc:source>10.15294/jte.v16i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jte/article/view/33936/6477</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Jurnal Teknik Elektro</dc:rights>
</oai_dc:dc>