Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Sliding mode performance control applied to a DFIG system for a wind energy production

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 6 (2020)

DOI
10.11591/ijece.v10i6.pp6139-6152
ISSN
2722-2578, 2088-8708
Published
2020-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This project presents a strategy of field control then sliding mode control put in to the conversion process of wind energy containing an asynchronous generator with double fed (DFAG; DFIG). A model was developed for each component of the wind turbine (turbine, DFAG and cascade rectifier-inverter). MPPT device must be introduced in order to obtain maximum energy efficiency so that PI-MPPT method is made. The objective is to apply this command to control independently the active and reactive powers generated by the asynchronous generator uncoupled by orientation from the flow. The results of digital simulations obtained show the improvement of the performances of the sliding control compared to the field control, also it has provided information on the commands available techniques as reference tracking and robustness.

Collaboration network of the authors

21 authors · 37 co-authorship links · 18 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Bechar
  • Université des Sciences et de la Technologie d'Oran Mohamed Boudiaf
  • Renewable Energy Development Center
  • École Nationale Polytechnique d'Oran
  • University of Science and Technology
  • Université de Bretagne Occidentale
  • Université Mustapha Stambouli de Mascara
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Abdelghani ChahmiAffiliation unknown2
Bertrand RaisonAffiliation unknown2
Mohamed BenbouzidUniversité de Bretagne Occidentale2
Dris AhmedÉcole Nationale Polytechnique d'Oran2
Belaidi AEKÉcole Nationale Polytechnique d'Oran2
Arama Fatima ZohraUniversity of Bechar1
Laribi SlimaneRenewable Energy Development Center1
Ismaïl Khalil BousserhaneUniversity of Bechar1
Youcef SahliRenewable Energy Development Center1
Youssef MouloudiUniversity of Bechar1
Harici OtmaneUniversity of Bechar1
Asmaa HAMMOUUniversité des Sciences et de la Technologie d'Oran Mohamed Boudiaf1
Mohammed Y. BenslimaneUniversité Mustapha Stambouli de Mascara1
Dahhou BrahimUniversité des Sciences et de la Technologie d'Oran Mohamed Boudiaf1
Salah LachtarRenewable Energy Development Center1
Houaria AbdelliAffiliation unknown1
Abdelkader MezouarAffiliation unknown1
Kheira BelgacemAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Sliding mode performance control applied to a DFIG system for a wind energy production</dc:title><dc:creator>FatimaZohra, Mansouri</dc:creator><dc:creator>Mokhtar, Bendjebbar</dc:creator><dc:creator>Benyounes, Mazari</dc:creator><dc:description>&lt;jats:p&gt;This project presents a strategy of field control then sliding mode control put in to the conversion process of wind energy containing an asynchronous generator with double fed (DFAG; DFIG). A model was developed for each component of the wind turbine (turbine, DFAG and cascade rectifier-inverter). MPPT device must be introduced in order to obtain maximum energy efficiency so that PI-MPPT method is made. The objective is to apply this command to control independently the active and reactive powers generated by the asynchronous generator uncoupled by orientation from the flow. The results of digital simulations obtained show the improvement of the performances of the sliding control compared to the field control, also it has provided information on the commands available techniques as reference tracking and robustness.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i6.pp6139-6152</dc:identifier><dc:identifier>10.11591/ijece.v10i6.pp6139-6152</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 6 (2020); 6139</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/20564/14401</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>