Melola Discovery

← Melola Discovery

Journal SINTA 1

The design of an efficient class E-LCCL capacitive power transfer system through frequency tuning method

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 2 (2021)

DOI
10.11591/ijece.v11i2.pp1095-1104
ISSN
2722-2578, 2088-8708
Published
2021-04-01
Publisher
Institute of Advanced Engineering and Science

Abstract

In this work, the optimum zero voltage switching (ZVS) of Class E-LCCL capacitive power transfer (CPT) was determined via frequency tuning method. Through this an efficient system can be guanranteed although there is a change in the capacitive plates distance. This study used a Class-E LCCL inverter, as it can operate at a high alternate current frequency, besides producing low switching losses and minimal power losses. Specifically, this study conducted simulations and experiments to analyse the performance of an LCCL CPT System at 1 MHz operating frequency and 24 V DC supply voltage. Using an air gap distance of 0.1 cm, the designed CPT system prototype successfully achieved an output power of 10W and an efficiency of 95.45%. This study also found that by tuning the resonant frequency of the Class E-LCCL system, the optimum ZVS can be obtained although capacitive plate distance was varied from 1-3 cm via experimental. The results of this study could benefit medical implant and portable device development, consumer electronics, and environments that involve electrical hazards.

Collaboration network of the authors

40 authors · 136 co-authorship links · 36 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Teknologi MARA
  • Universiti Malaysia Terengganu
  • University of Auckland
  • Universiti Malaysia Perlis
  • Christian-Albrechts-Universität zu Kiel
  • University of Technology Malaysia
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Md Rabiul AwalUniversiti Malaysia Terengganu10
Siti Huzaimah HusinUniversiti Teknikal Malaysia Melaka9
A. A. M. IsaUniversiti Teknikal Malaysia Melaka6
Cheok Yan QiUniversiti Teknikal Malaysia Melaka6
F. K. A. RahmanAffiliation unknown5
Ahmad Husni Mohd ShapriUniversiti Malaysia Perlis5
Muslimah MeorUniversiti Teknikal Malaysia Melaka4
Yusmarnita YusofUniversiti Teknikal Malaysia Melaka3
Norezmi JamalUniversiti Teknikal Malaysia Melaka3
Thoriq ZaidUniversiti Teknikal Malaysia Melaka3
R. A. RaniUniversiti Teknikal Malaysia Melaka3
F. K. Abdul RahmanAffiliation unknown3
Amy Sarah NguUniversiti Teknikal Malaysia Melaka3
Noor Badariah AsanUniversiti Teknikal Malaysia Melaka3
Peter Adam HoeherChristian-Albrechts-Universität zu Kiel3
Masmaria Abdul MajidUniversiti Teknologi MARA3
Mohd Sufian RamliUniversiti Teknologi MARA3
Ahmed Al-HattamiAffiliation unknown3
Mohd Shakir Md SaatUniversiti Teknikal Malaysia Melaka2
Sing Kiong NguangUniversity of Auckland2
N. X. YinUniversiti Teknikal Malaysia Melaka2
Mohd Haizal JamaluddinUniversity of Technology Malaysia2
M. S. M. IsaUniversiti Teknikal Malaysia Melaka2
N NabilaUniversiti Teknikal Malaysia Melaka2
Amat Amir BasariUniversiti Teknikal Malaysia Melaka2
Zaki MustapaUniversiti Teknikal Malaysia Melaka1
Zakiah Mohd YusoffUniversiti Teknologi MARA1
Siti Aminah NordinUniversiti Teknologi MARA1
Muhammad Hanif FaisalUniversiti Teknologi MARA1
Imran HindustanUniversiti Teknikal Malaysia Melaka1
A. M. DarsonoUniversiti Teknikal Malaysia Melaka1
O. Z. GuatAffiliation unknown1
F.K. Abdul RahmanAffiliation unknown1
Muhammad Zaki MustapaUniversiti Teknikal Malaysia Melaka1
Zamre Abdul GhaniUniversiti Teknikal Malaysia Melaka1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>The design of an efficient class E-LCCL capacitive power transfer system through frequency tuning method</dc:title><dc:creator>Hasan, Khairul Kamarudin</dc:creator><dc:creator>Saat, Shakir</dc:creator><dc:creator>Yusop, Yusmarnita</dc:creator><dc:creator>Husin, Huzaimah</dc:creator><dc:creator>Md Sin, Nor Diyana</dc:creator><dc:description>&lt;jats:p&gt;In this work, the optimum zero voltage switching (ZVS) of Class E-LCCL capacitive power transfer (CPT) was determined via frequency tuning method. Through this an efficient system can be guanranteed although there is a change in the capacitive plates distance. This study used a Class-E LCCL inverter, as it can operate at a high alternate current frequency, besides producing low switching losses and minimal power losses. Specifically, this study conducted simulations and experiments to analyse the performance of an LCCL CPT System at 1 MHz operating frequency and 24 V DC supply voltage. Using an air gap distance of 0.1 cm, the designed CPT system prototype successfully achieved an output power of 10W and an efficiency of 95.45%. This study also found that by tuning the resonant frequency of the Class E-LCCL system, the optimum ZVS can be obtained although capacitive plate distance was varied from 1-3 cm via experimental. The results of this study could benefit medical implant and portable device development, consumer electronics, and environments that involve electrical hazards.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i2.pp1095-1104</dc:identifier><dc:identifier>10.11591/ijece.v11i2.pp1095-1104</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 2 (2021); 1095</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/22032/14635</dc:relation></oai_dc:dc>