Melola Discovery

← Melola Discovery

Journal SINTA 1

DC-DC converter with 50 kHz-500 kHz range of switching frequency for passive component volume reduction

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 2 (2021)

DOI
10.11591/ijece.v11i2.pp1114-1122
ISSN
2722-2578, 2088-8708
Published
2021-04-01
Publisher
Institute of Advanced Engineering and Science

Abstract

This paper presents the relationship of switching frequency towards passive components volume of DC-DC boost converter. Principally, the inductor current ripple and capacitor voltage ripple must be considered in order to design the inductor and capacitor, respectively. By increasing the switching frequency, smaller size and volume of passive component can be designed. As the consequences, the switching loss increases during switching transition at turn-ON and turn-OFF conditions. This paper used soft-switching technique to reduce the switching loss at turn-ON condition. The soft-switching technique is realized by adding resonant circuit in DC-DC boost converter. The effectiveness of resonant circuit will be analysed, thus, the efficiency of the converter can be improved. The range of switching frequency considered in the experimental are 50 kHz to 500 kHz. A 100 W prototype has been developed and tested in order to verify the principle. The switching loss experimentally confirm reduced by implementing soft-switching technique with efficiency converter improved from 96.36% to 97.12% when 500 kHz of switching frequency is considered. The passive components volume reduction is achieved when high switching frequency is used where the total volume of passive component when 50 kHz and 500 kHz are 0.083 dm3 and 0.010 dm3, respectively.

Collaboration network of the authors

37 authors · 152 co-authorship links · 22 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Tun Hussein Onn University of Malaysia
  • University of Technology Malaysia
  • California Polytechnic State University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
M. H. YatimTun Hussein Onn University of Malaysia6
Afarulrazi Abu BakarTun Hussein Onn University of Malaysia3
M. A. Z. A. RashidTun Hussein Onn University of Malaysia3
Rahisham Abd RahmanTun Hussein Onn University of Malaysia2
N. S. M. IbrahimTun Hussein Onn University of Malaysia2
M. P. MartinTun Hussein Onn University of Malaysia2
Azlina Md YassinAffiliation unknown2
A. EahambramAffiliation unknown2
Mohd Azhar HarimonTun Hussein Onn University of Malaysia2
H. H. HamzahTun Hussein Onn University of Malaysia2
Mohamad Kamil Romai NoorTun Hussein Onn University of Malaysia2
J. N. JumadrilTun Hussein Onn University of Malaysia2
Rosli OmarTun Hussein Onn University of Malaysia1
Che Ku Nor Azie Hailma Che Ku MelorTun Hussein Onn University of Malaysia1
Ariffuddin JoretTun Hussein Onn University of Malaysia1
Maryanti RazaliTun Hussein Onn University of Malaysia1
Muhammad Suhaimi SulongTun Hussein Onn University of Malaysia1
M. H. AzizAffiliation unknown1
Taufik TaufikCalifornia Polytechnic State University1
M.U. WahyuAffiliation unknown1
Moch. AzizAffiliation unknown1
Farid ZubirUniversity of Technology Malaysia1
Huda A. MajidTun Hussein Onn University of Malaysia1
Samsul Haimi DahlanTun Hussein Onn University of Malaysia1
Zuhairiah Zainal AbidinTun Hussein Onn University of Malaysia1
Shaharil Mohd ShahTun Hussein Onn University of Malaysia1
Fauziahanim Che SemanTun Hussein Onn University of Malaysia1
S. A. HamzahTun Hussein Onn University of Malaysia1
Norshidah KatiranTun Hussein Onn University of Malaysia1
A. A. RosmanTun Hussein Onn University of Malaysia1
Fazilah HassanUniversity of Technology Malaysia1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>DC-DC converter with 50 kHz-500 kHz range of switching frequency for passive component volume reduction</dc:title><dc:creator>Kasiran, Mohd Amirul Naim</dc:creator><dc:creator>Ponniran, Asmarashid</dc:creator><dc:creator>Siam, Nurul Nabilah Mad</dc:creator><dc:creator>Yatim, Mohd Hafizie</dc:creator><dc:creator>Che Ibrahim, Nor Azmira</dc:creator><dc:creator>Md Yunos, Asmawi</dc:creator><dc:description>&lt;jats:p&gt;This paper presents the relationship of switching frequency towards passive components volume of DC-DC boost converter. Principally, the inductor current ripple and capacitor voltage ripple must be considered in order to design the inductor and capacitor, respectively. By increasing the switching frequency, smaller size and volume of passive component can be designed. As the consequences, the switching loss increases during switching transition at turn-ON and turn-OFF conditions. This paper used soft-switching technique to reduce the switching loss at turn-ON condition. The soft-switching technique is realized by adding resonant circuit in DC-DC boost converter. The effectiveness of resonant circuit will be analysed, thus, the efficiency of the converter can be improved. The range of switching frequency considered in the experimental are 50 kHz to 500 kHz. A 100 W prototype has been developed and tested in order to verify the principle. The switching loss experimentally confirm reduced by implementing soft-switching technique with efficiency converter improved from 96.36% to 97.12% when 500 kHz of switching frequency is considered. The passive components volume reduction is achieved when high switching frequency is used where the total volume of passive component when 50 kHz and 500 kHz are 0.083 dm3 and 0.010 dm3, respectively.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i2.pp1114-1122</dc:identifier><dc:identifier>10.11591/ijece.v11i2.pp1114-1122</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 2 (2021); 1114</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/22108/14637</dc:relation></oai_dc:dc>