Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Optimization of system’s parameters for wavelength conversion of E-band signals

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 12 No. 2 (2022)

DOI
10.11591/ijece.v12i2.pp1659-1666
ISSN
2722-2578, 2088-8708
Published
2022-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Current and future wireless communication systems are designed to achieve the user’s demands such as high data rate and high speed with low latency and simultaneously to save bandwidth and spectrum. In 5G and 6G networks, a high speed of transmitting and switching is required for internet of things (IoT) applications with higher capacity. To achieve these requirements a semiconductor optical amplifier (SOA) is considered as a wavelength converter to transmit a signal with an orthogonal frequency division multiplexing with subcarrier power modulation (OFDM-SPM). It exploits the subcarrier’s power in conventional OFDM block in order to send additional bits beside the normally transmitted bits. In this paper, we optimized the SOA’s parameters to have efficient wavelength conversion process. These parameters are included the injection current (IC) of SOA, power of pump and probe signals. A 7 Gbps OFDM-SPM signal with a millimeter waves (MMW) carrier of 80 GHz is considered for signal switching. The simulation results investigated and analyzed the performance of the designed system in terms of error vector magnitude (EVM), bit error rate (BER) and optical signal-to-noise ratio (OSNR). The optimum value of IC is 0.6 A while probe power is 9.45 and 8.9 dBm for pump power. The simulation is executed by virtual photonic integrated (VPI) software.

Collaboration network of the authors

17 authors · 55 co-authorship links · 27 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Technology Malaysia
  • National Research and Innovation Agency
  • Tun Hussein Onn University of Malaysia
  • King Faisal University
  • Universiti Teknikal Malaysia Melaka
  • Universiti Teknologi MARA
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Sevia Mahdaliza IdrusUniversity of Technology Malaysia2
M. F. L. AbdullahTun Hussein Onn University of Malaysia1
Purwoko AdhiNational Research and Innovation Agency1
Hana ArisesaUniversity of Technology Malaysia1
Yusuf Nur WijayantoNational Research and Innovation Agency1
Nadiatulhuda ZulkifliUniversity of Technology Malaysia1
Arnidza Binti RamliUniversity of Technology Malaysia1
Sumayya BibiUniversity of Technology Malaysia1
Sajid IqbalKing Faisal University1
Adam Wong Yoon KhangUniversiti Teknikal Malaysia Melaka1
Rizwan Aslam ButtUniversity of Technology Malaysia1
Nor Affida M. ZinUniversiti Teknologi MARA1
N. A. IsmailUniversity of Technology Malaysia1
Fadila Mohd AtanUniversity of Technology Malaysia1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Optimization of system’s parameters for wavelength conversion of E-band signals</dc:title><dc:creator>Alkhlefat, Yazan</dc:creator><dc:creator>Sutan Nameh, Sevia Mahdaliza Idrus</dc:creator><dc:creator>Iqbal, Farabi M.</dc:creator><dc:description>&lt;jats:p&gt;Current and future wireless communication systems are designed to achieve the user’s demands such as high data rate and high speed with low latency and simultaneously to save bandwidth and spectrum. In 5G and 6G networks, a high speed of transmitting and switching is required for internet of things (IoT) applications with higher capacity. To achieve these requirements a semiconductor optical amplifier (SOA) is considered as a wavelength converter to transmit a signal with an orthogonal frequency division multiplexing with subcarrier power modulation (OFDM-SPM). It exploits the subcarrier’s power in conventional OFDM block in order to send additional bits beside the normally transmitted bits. In this paper, we optimized the SOA’s parameters to have efficient wavelength conversion process. These parameters are included the injection current (IC) of SOA, power of pump and probe signals. A 7 Gbps OFDM-SPM signal with a millimeter waves (MMW) carrier of 80 GHz is considered for signal switching. The simulation results investigated and analyzed the performance of the designed system in terms of error vector magnitude (EVM), bit error rate (BER) and optical signal-to-noise ratio (OSNR). The optimum value of IC is 0.6 A while probe power is 9.45 and 8.9 dBm for pump power. The simulation is executed by virtual photonic integrated (VPI) software.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2022-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v12i2.pp1659-1666</dc:identifier><dc:identifier>10.11591/ijece.v12i2.pp1659-1666</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 12 No 2 (2022); 1659</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/25875/15564</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>