Melola Discovery

← Melola Discovery

Journal

Physical Analysis of a Fishing Rod and Development of an Elasticity E-Module as a Supplement for Mechanics Learning

Unnes Physics Education Journal · Vol. 15 No. 2 (2026) · pp. 16–31

DOI
10.15294/upej.v15i2.31899
ISSN
2503-2313, 2252-6935
Published
2026-09-16
Publisher
Universitas Negeri Semarang
Language
eng

Abstract

Mechanics instruction at the university level, particularly for students in the Physics and Physics Education study programs, is often hindered by the abstract nature of the content, complex formulas, and unengaging modes of delivery. A preliminary study showed that 83.3% of students found mechanics difficult to understand, partly because of the limited variety of learning media. One interesting topic in mechanics is the dynamics of elastic bodies, including fishing rods. These dynamics involve numerous physical concepts and complex mathematical equations, so an enrichment module is needed to facilitate students’ understanding. This study aimed to develop an elasticity e-module as a supplement for mechanics learning, focusing on the analysis of the curvature of a fishing rod (an elastic rod) and a comparison of the acceleration multiplication factor between elastic and non-elastic rods subjected to a force impulse. This study used a Research and Development (R&D) approach with the 4D development model (Define, Design, Develop, Disseminate). The physical analysis was conducted theoretically and experimentally on tapered elastic rods. In the curvature experiment, the load was varied, whereas in the acceleration experiment, the acceleration response was observed using the accelerometer sensor of a smartphone. The developed e-module was validated by subject-matter and media experts and tested with students as users. The validation results showed that the e-module was categorized as “very feasible” in both content and media aspects. Meanwhile, students’ responses fell into the “very good” category for material presentation (90.53%), language (91.58%), visual display (88.84%), usefulness (91.89%), technical aspects (91.75%), and evaluation (90.53%). Therefore, the elasticity e-module is feasible for use as a supplement in Mechanics courses.

Keywords

Collaboration network of the authors

25 authors · 62 co-authorship links · 3 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • State University of Semarang
  • Universitas Swadaya Gunung Jati
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aji PurwinarkoState University of Semarang2
Sadimin SadiminAffiliation unknown1
Achmad SlametState University of Semarang1
Soesanto SoesantoState University of Semarang1
Martuti MartutiState University of Semarang1
Haryono HaryonoState University of Semarang1
Tri Joko RaharjoState University of Semarang1
Turini ErnawatiUniversitas Swadaya Gunung Jati1
Rasdi Eko SiswoyoState University of Semarang1
Sutikno SutiknoState University of Semarang1
Riska Sukma IsnayantiAffiliation unknown1
Suharto LinuwihState University of Semarang1
Yulita NurbaitiState University of Semarang1
Arif WidiyatmokoState University of Semarang1
Kholiq BudimanState University of Semarang1
Fitri Arum SasiState University of Semarang1
Nila Prasetya AryaniAffiliation unknown1
Defin AndestianAffiliation unknown1
SugiyantoAffiliation unknown1
Wahyu SetyaningrumAffiliation unknown1
M Fadil MardiansyahAffiliation unknown1
Muhamad Anbiya Nur IslamAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/upej/oai, first harvested 6 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Physical Analysis of a Fishing Rod and Development of an Elasticity E-Module as a Supplement for Mechanics Learning</dc:title>
	<dc:creator xml:lang="en">Saputra, Edi</dc:creator>
	<dc:creator xml:lang="en">Hardyanto, Wahyu</dc:creator>
	<dc:creator xml:lang="en">Listiyanto</dc:creator>
	<dc:subject xml:lang="en">Elasticity, E-Module, Mechanics, 4D Development, Fishing Rod </dc:subject>
	<dc:description xml:lang="en">Mechanics instruction at the university level, particularly for students in the Physics and Physics Education study programs, is often hindered by the abstract nature of the content, complex formulas, and unengaging modes of delivery. A preliminary study showed that 83.3% of students found mechanics difficult to understand, partly because of the limited variety of learning media. One interesting topic in mechanics is the dynamics of elastic bodies, including fishing rods. These dynamics involve numerous physical concepts and complex mathematical equations, so an enrichment module is needed to facilitate students’ understanding. This study aimed to develop an elasticity e-module as a supplement for mechanics learning, focusing on the analysis of the curvature of a fishing rod (an elastic rod) and a comparison of the acceleration multiplication factor between elastic and non-elastic rods subjected to a force impulse. This study used a Research and Development (R&amp;amp;D) approach with the 4D development model (Define, Design, Develop, Disseminate). The physical analysis was conducted theoretically and experimentally on tapered elastic rods. In the curvature experiment, the load was varied, whereas in the acceleration experiment, the acceleration response was observed using the accelerometer sensor of a smartphone. The developed e-module was validated by subject-matter and media experts and tested with students as users. The validation results showed that the e-module was categorized as “very feasible” in both content and media aspects. Meanwhile, students’ responses fell into the “very good” category for material presentation (90.53%), language (91.58%), visual display (88.84%), usefulness (91.89%), technical aspects (91.75%), and evaluation (90.53%). Therefore, the elasticity e-module is feasible for use as a supplement in Mechanics courses. </dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-09-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/upej/article/view/31899</dc:identifier>
	<dc:identifier>10.15294/upej.v15i2.31899</dc:identifier>
	<dc:source xml:lang="en">Unnes Physics Education Journal; Vol. 15 No. 2 (2026); 16-31</dc:source>
	<dc:source>2503-2313</dc:source>
	<dc:source>2252-6935</dc:source>
	<dc:source>10.15294/upej.v15i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/upej/article/view/31899/11859</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Unnes Physics Education Journal</dc:rights>
</oai_dc:dc>