Open access Journal SINTA 1
Feasibility analysis of the conversion of brushed to brushless direct current motor
International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 1 (2023)
- ISSN
- 2722-2578, 2088-8708
- Published
- 2023-02-01
- Publisher
- Institute of Advanced Engineering and Science
Abstract
This paper analyzes the feasibility of converting brushed direct current (BDC) to brushless direct current (BLDC) motor by substituting the wound rotor with a permanent magnet. The aim is to overcome the low quality of rewinding of wound rotors. The conversion was performed by redesigning the motor, referring to the old stator dimensions and motor specifications. Some suitable speed control systems were also examined. Technical analysis was executed by simulating motor characteristics, covering torque-speed curve, cogging, and ripple torques. Afterward, an economic analysis was done to determine the cost of making one rotor unit and the speed control and then compare it with the price of a new BDC motor with equivalent power. The results show that the motor produces 3.6 kW, 18.86 V, 176.71 A, and 28.53 Nm at 2,460 rpm with 2 phases configuration. The maximum cogging torque is 2.9 Nm. The cost of making one rotor unit plus speed control is higher than that of a new BDC motor. These results show that it is technically feasible to convert BDC into a BLDC motor but not economically or vice versa.
Collaboration network of the authors
33 authors · 111 co-authorship links · 61 across different organisations
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
- National Research and Innovation Agency
- Indonesian Institute of Sciences
- Bandung Institute of Technology
- Diponegoro University
- National University of Malaysia
- Telkom University
- Atma Jaya Catholic University of Indonesia
- Different organisations
- Same organisation
- Affiliation unknown
- Thicker line = more joint articles · bigger circle = more articles
Show as table
| Co-author | Organisation | Joint articles |
|---|---|---|
| Sulistyo Wijanarko | National Research and Innovation Agency | 10 |
| Muhammad Kasim | National Research and Innovation Agency | 6 |
| Ketut Wirtayasa | National Research and Innovation Agency | 6 |
| Harjono Priyo Santosa | National Research and Innovation Agency | 3 |
| Pekik Argo Dahono | Bandung Institute of Technology | 3 |
| Tajuddin Nur | Atma Jaya Catholic University of Indonesia | 3 |
| I Nengah Diasta | Bandung Institute of Technology | 3 |
| Priyono Soetikno | Bandung Institute of Technology | 3 |
| Ersalina Werda Mukti | Indonesian Institute of Sciences | 2 |
| Yugo Kumoro | Indonesian Institute of Sciences | 2 |
| Yuliana Susilowati | Indonesian Institute of Sciences | 2 |
| Wawan Hendriawan Nur | Indonesian Institute of Sciences | 2 |
| Yunarto Yunarto | Indonesian Institute of Sciences | 2 |
| Agus Risdiyanto | National Research and Innovation Agency | 2 |
| Noviadi Arief Rachman | Indonesian Institute of Sciences | 2 |
| Bambang Susanto | Indonesian Institute of Sciences | 2 |
| Priyono Sutikno | Bandung Institute of Technology | 2 |
| Qidun Maulana | Indonesian Institute of Sciences | 2 |
| Budi Azhari | Indonesian Institute of Sciences | 2 |
| Ahmad Fudholi | National University of Malaysia | 1 |
| Ant. Ardath Kristi | National Research and Innovation Agency | 1 |
| Agus Junaedi | National Research and Innovation Agency | 1 |
| Indrarini Dyah Irawati | Telkom University | 1 |
| Gifari Iswandi Hasyim | Bandung Institute of Technology | 1 |
| Jihad Furqani | Bandung Institute of Technology | 1 |
| Arwindra Rizqiawan | Bandung Institute of Technology | 1 |
| Qidun Maulana Binu Soesanto | Diponegoro University | 1 |
| Qidir Maulana Binu Soesanto | Diponegoro University | 1 |
| Tinton Dwi Atmaja | National Research and Innovation Agency | 1 |
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.