Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Fabrication and experimental study of transformer 400 V with a simple rectifier circuit design

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 2 (2023)

DOI
10.11591/ijece.v13i2.pp1320-1328
ISSN
2722-2578, 2088-8708
Published
2023-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

The demand for increased voltage in renewable energy sources is relatively high. This study examines the rapid development of technology considering the use of voltage-increasing transformers. Voltage regulator circuits are generally used to stabilize the output voltage of the rectifier according to the amount of input from the transformer. However, components for high-voltage stabilizer circuits are rare, which becomes an obstacle to the stabilization of the rectifier output. This study aimed to determine the performance of the designed rectifier circuit against a non-center tap step-up direct current (DC) 400 V transformer and compare the measurement results to manual calculations. The research method is a direct comparison between the input and output voltage values of the transformer after going through a rectifier circuit. This experiment was conducted using the repeatability method three to five times for each voltage variation on the transformer. The voltage variations successfully created are 0 to 50, 0 to 100, 0 to 200, and 0 to 400 V. The output test results from the DC transformer and rectifier circuit show linear results and an increase in peak-to-peak voltage data between the transformer and rectifier outputs by 3.8%.

Collaboration network of the authors

40 authors · 69 co-authorship links · 31 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Gadjah Mada
  • Tadulako University
  • Diponegoro University
  • Kwansei Gakuin University
  • Universitas Bina Darma
  • Muria Kudus University
  • Sultan Ageng Tirtayasa University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Rofiqul UmamKwansei Gakuin University2
Ragil SaputraDiponegoro University1
Standy OeiAffiliation unknown1
Ari MuzakirUniversitas Bina Darma1
Anastasya LatubessyMuria Kudus University1
Frans Nurmianto AllokendekAffiliation unknown1
John SoetiknoAffiliation unknown1
Emi Budi SusilowatiAffiliation unknown1
Effan NajwainiUniversitas Gadjah Mada1
Alimuddin AlimuddinSultan Ageng Tirtayasa University1
I Gede WinayaUniversitas Gadjah Mada1
Murhaban MurhabanUniversitas Teuku Umar1
Kabul KurniawanDiponegoro University1
Mulyanto MulyantoSriwijaya University1
Medi TarukUniversitas Gadjah Mada1
Rasna RasnaUniversitas Gadjah Mada1
Dandun Kusuma YudhaUniversitas Gadjah Mada1
Lilia Ervina Jeronimo GuterresUniversitas Gadjah Mada1
Dimas Febriyan PriambodoPoliteknik Siber dan Sandi Negara1
Retantyo WardoyoUniversitas Gadjah Mada1
Bernard Renaldy SutejaAffiliation unknown1
Suryo GuritnoAffiliation unknown1
Ridi FerdianaUniversitas Gadjah Mada1
Paulus Insap SantosoUniversitas Gadjah Mada1
Lukito Edi NugrohoUniversitas Gadjah Mada1
Harsano JayadiTadulako University1
Icha Untari MeidjiTadulako University1
Ayusari WahyuniUniversitas Islam Negeri Alauddin Makassar1
Ninasafitri NinasafitriTadulako University1
Adrian Rahmat Nur AdrianUniversitas Halu Oleo1
Febrian Dedi SastrawanInstitut Teknologi Kalimantan1
Bayu Achil SadjabUniversitas Halmahera1
Triani TrianiUniversitas Sembilanbelas November Kolaka1
Emi Prasetyawati UmarUniversitas Muslim Indonesia1
Rahmat Nawi SiregarSumatera Institute of Technology1
Frida Yassar MaulaAffiliation unknown1
Hirotaka TakahashiAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Fabrication and experimental study of transformer 400 V with a simple rectifier circuit design</dc:title><dc:creator>Puspasari, Fitri</dc:creator><dc:creator>Sismanto, Sismanto</dc:creator><dc:creator>Ashari, Ahmad</dc:creator><dc:description>&lt;jats:p&gt;The demand for increased voltage in renewable energy sources is relatively high. This study examines the rapid development of technology considering the use of voltage-increasing transformers. Voltage regulator circuits are generally used to stabilize the output voltage of the rectifier according to the amount of input from the transformer. However, components for high-voltage stabilizer circuits are rare, which becomes an obstacle to the stabilization of the rectifier output. This study aimed to determine the performance of the designed rectifier circuit against a non-center tap step-up direct current (DC) 400 V transformer and compare the measurement results to manual calculations. The research method is a direct comparison between the input and output voltage values of the transformer after going through a rectifier circuit. This experiment was conducted using the repeatability method three to five times for each voltage variation on the transformer. The voltage variations successfully created are 0 to 50, 0 to 100, 0 to 200, and 0 to 400 V. The output test results from the DC transformer and rectifier circuit show linear results and an increase in peak-to-peak voltage data between the transformer and rectifier outputs by 3.8%.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i2.pp1320-1328</dc:identifier><dc:identifier>10.11591/ijece.v13i2.pp1320-1328</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 2 (2023); 1320</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/27444/16331</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>