Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Modelling and simulation for energy management of a hybrid microgrid with droop controller

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 3 (2023)

DOI
10.11591/ijece.v13i3.pp2440-2448
ISSN
2722-2578, 2088-8708
Published
2023-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

The most efficient and connected alternative for increasing the use of local renewable energy sources is a hybrid microgrid, these systems face additional challenges due to the integration of power electronics, energy storage technologies and traditional power plants. The hybrid alternating current-direct current (AC-DC) microgrid that is the subject of this research uses a primary-droop control system to regulate state variables and auxiliary services, thus, it is composed of batteries, solar panels and a miniature wind turbine (PDC) and controls how each energy source in a microgrid contributes to the final product. To achieve the given objectives, this paper will create appropriate models for each part of the microgrid design and define, among them, the energy storage batteries and power electronic converters required for each level of each of these systems. Finally, the dynamic nature of the system will be critically evaluated and characterized, to distribute the load and reduce imbalances, modify the primary drop of the resulting microgrid using MATLAB simulation.

Collaboration network of the authors

16 authors · 35 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Hassan II Casablanca
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Zakaria M’barkiUniversity of Hassan II Casablanca12
Khalid SabhiUniversity of Hassan II Casablanca2
Soufiane LghaziAffiliation unknown2
Ali Ait SalihAffiliation unknown2
Ali Ait SalihUniversity of Hassan II Casablanca2
Ali Ait SalihUniversity of Hassan II Casablanca2
Oumaima TakiUniversity of Hassan II Casablanca2
Kaoutar Senhaji RhaziAffiliation unknown1
Yasser BoukioudAffiliation unknown1
Mohamed TarbouchUniversity of Hassan II Casablanca1
Abdelkebir ElamriAffiliation unknown1
Abdel-Ali LaabadliUniversity of Hassan II Casablanca1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Modelling and simulation for energy management of a hybrid microgrid with droop controller</dc:title><dc:creator>Saadaoui, Khalil</dc:creator><dc:creator>Rhazi, Kaoutar Senhaji</dc:creator><dc:creator>Mejdoub, Youssef</dc:creator><dc:creator>Aboudou, Abderraouf</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span lang="EN-US"&amp;gt;The most efficient and connected alternative for increasing the use of local renewable energy sources is a hybrid microgrid, these systems face additional challenges due to the integration of power electronics, energy storage technologies and traditional power plants. The hybrid &amp;lt;a name="_Hlk120713679"&amp;gt;&amp;lt;/a&amp;gt;alternating current-direct current (AC-DC) microgrid that is the subject of this research uses a primary-droop control system to regulate state variables and auxiliary services, thus, it is composed of batteries, solar panels and a miniature wind turbine (PDC) and controls how each energy source in a microgrid contributes to the final product. To achieve the given objectives, this paper will create appropriate models for each part of the microgrid design and define, among them, the energy storage batteries and power electronic converters required for each level of each of these systems. Finally, the dynamic nature of the system will be critically evaluated and characterized, to distribute the load and reduce imbalances, modify the primary drop of the resulting microgrid using MATLAB simulation.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i3.pp2440-2448</dc:identifier><dc:identifier>10.11591/ijece.v13i3.pp2440-2448</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 3 (2023); 2440</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/28855/16490</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>