Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Design and implementation a novel single switch high gain DC-DC converter based on coupled inductor with low-ripple input current

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 6 (2023)

DOI
10.11591/ijece.v13i6.pp6141-6155
ISSN
2722-2578, 2088-8708
Published
2023-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

A novel high-gain and high-efficiency direct current to direct current (DC-DC) converter is introduced in this paper. The presented converter is suitable for low-voltage renewable energy resources such as photovoltaic (PV) and fuel cell (FC). The existence of series inductance with the input source ensures continuous and low-ramp input current, which is important for extracting maximum power from resources. Using coupled inductor technology and an intermediate capacitor in the suggested converter leads to a high gain voltage. In the presented topology for recovering energy from the leakage inductor, reducing voltage stress on the power switch, and so decreasing overall converter losses, a passive clamp circuit is used. The suitable operation range of duty cycle in the converter, besides the leakage inductor, decreases the problem of reverse recovery in diodes. The low value of the leakage inductor and the low volume and cost of the proposed converter are due to the low turn ratio of the coupled inductor. Details of the operation principles of the proposed converter have been discussed in this paper. The presented simulation and laboratory prototype results verify the theoretical analysis and performance of the suggested topology.

Collaboration network of the authors

40 authors · 104 co-authorship links · 38 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Universitas Ahmad Dahlan
  • Islamic Azad University, Tehran
  • Diponegoro University
  • Universiti Malaysia Perlis
  • Azarbaijan Shahid Madani University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Auzani JidinUniversiti Teknikal Malaysia Melaka34
Nik Rumzi Nik IdrisUniversity of Technology Malaysia18
Mohammad JannatiUniversity of Technology Malaysia16
Mohd Hatta JopriUniversiti Teknikal Malaysia Melaka15
Awang JusohUniversity of Technology Malaysia15
Nik Rumzi Nik IdrisAffiliation unknown14
Mohd Junaidi Abdul AzizUniversity of Technology Malaysia10
Mustafa ManapUniversiti Teknikal Malaysia Melaka10
Kasrul Abdul KarimAffiliation unknown9
Lina HandayaniUniversitas Ahmad Dahlan8
Mohamed SalemUniversiti Sains Malaysia8
Mahmoud ZadehbagheriIslamic Azad University, Tehran8
Abdul Rahim AbdullahUniversiti Teknikal Malaysia Melaka6
Mochammad FactaDiponegoro University6
Mohammad Javad KianiIslamic Azad University, Tehran5
Shahreen KasimAffiliation unknown5
Watra ArsadiandoAffiliation unknown5
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis5
Mohd Junaidi Abdul AzizAffiliation unknown5
Imam Much Ibnu SubrotoSultan Agung Islamic University4
M. Rahimi YusoffUniversiti Teknikal Malaysia Melaka4
Muhammad AdoUniversity of Technology Malaysia4
Hendril Satrian PurnamaAffiliation unknown4
Anggit PamungkasAffiliation unknown4
Vahdat NazerianUniversity of Mazandaran4
Muhammad Zaid AihsanUniversiti Malaysia Perlis4
Chibuike Peter OhanuUniversity of Nigeria4
Tri WahonoAffiliation unknown4
Rahim IldarabadiAffiliation unknown4
Azralmukmin AzmiAffiliation unknown4
Shahrin Md AyobAffiliation unknown4
Siti Azura Ahmad TarusanAffiliation unknown4
Ibrahim AlhamrouniAffiliation unknown4
Aiman Zakwan JidinAffiliation unknown4
Munawar Agus RiyadiDiponegoro University3
Deris StiawanSriwijaya University3
Shahreen binti KasimTun Hussein Onn University of Malaysia3

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 8 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and implementation a novel single switch high gain  DC-DC converter based on coupled inductor with low-ripple input current</dc:title><dc:creator>Barmoudeh, Farid</dc:creator><dc:creator>Ajami, Ali</dc:creator><dc:creator>Sutikno, Tole</dc:creator><dc:description>&lt;jats:p&gt;A novel high-gain and high-efficiency direct current to direct current (DC-DC) converter is introduced in this paper. The presented converter is suitable for low-voltage renewable energy resources such as photovoltaic (PV) and fuel cell (FC). The existence of series inductance with the input source ensures continuous and low-ramp input current, which is important for extracting maximum power from resources. Using coupled inductor technology and an intermediate capacitor in the suggested converter leads to a high gain voltage. In the presented topology for recovering energy from the leakage inductor, reducing voltage stress on the power switch, and so decreasing overall converter losses, a passive clamp circuit is used. The suitable operation range of duty cycle in the converter, besides the leakage inductor, decreases the problem of reverse recovery in diodes. The low value of the leakage inductor and the low volume and cost of the proposed converter are due to the low turn ratio of the coupled inductor. Details of the operation principles of the proposed converter have been discussed in this paper. The presented simulation and laboratory prototype results verify the theoretical analysis and performance of the suggested topology.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i6.pp6141-6155</dc:identifier><dc:identifier>10.11591/ijece.v13i6.pp6141-6155</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 6 (2023); 6141</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/26898/17049</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>