Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Advanced control scheme of doubly fed induction generator for wind turbine using second sliding mode control

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 14 No. 3 (2024)

DOI
10.11591/ijece.v14i3.pp2562-2570
ISSN
2722-2578, 2088-8708
Published
2024-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator(DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC).Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.

Collaboration network of the authors

19 authors · 37 co-authorship links · 23 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • École Nationale Polytechnique d'Oran
  • Université Mustapha Stambouli de Mascara
  • National Polytechnic School
  • University of Boumerdes
  • Hassiba Benbouali University of Chlef
  • Université Djilali Bounaama Khemis Miliana
  • Université IBN Khaldoun Tiaret
  • Other organisations
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Soraya ZebirateÉcole Nationale Polytechnique d'Oran4
Bensaid AmelÉcole Nationale Polytechnique d'Oran2
Benameur AfifUniversité Mustapha Stambouli de Mascara1
Boualem MerabetUniversité Mustapha Stambouli de Mascara1
Amina BenhamouUniversity of Boumerdes1
Zinelaabidine BoudjemaHassiba Benbouali University of Chlef1
Meriem BenmezianeÉcole Nationale Polytechnique d'Oran1
Tayeb AllaouiUniversité IBN Khaldoun Tiaret1
Abdelkader YousfiUniversité Djilali Bounaama Khemis Miliana1
Iliace ArbaouiUniversité Oran 1 Ahmed Ben Bella1
Tadjeddine Ali A.École Nationale Polytechnique d'Oran1
H. HamianiÉcole Nationale Polytechnique d'Oran1
Nouir AhmedÉcole Nationale Polytechnique d'Oran1
Mounir KhiatÉcole Nationale Polytechnique d'Oran1
Ali Abderrazak TadjeddineCentre Universitaire Nour Bachir El Bayadh1
L. AbdelmalekNational Polytechnic School1
N. KhalfalahNational Polytechnic School1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 15 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Advanced control scheme of doubly fed induction generator for wind turbine using second sliding mode control</dc:title><dc:creator>Bekouche, Hafida</dc:creator><dc:creator>Chaker, Abdelkader</dc:creator><dc:description>&lt;jats:p&gt;This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator(DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC).Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2024-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v14i3.pp2562-2570</dc:identifier><dc:identifier>10.11591/ijece.v14i3.pp2562-2570</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 14 No 3 (2024); 2562</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/26961/17350</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>