Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Design of Comprehensive Monitoring on Hybrid Photovoltaic and Thermoelectric Generator Using IoT

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 6 No. 1 (2024) · hlm. 238–248

DOI
10.37385/jaets.v6i1.5764
ISSN
2715-6079, 2715-6087
Terbit
2024-12-15
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

The study aims to design and develop a more efficient measurement monitoring system based on influential parameters for the performance of hybrid PV and TEG modules using IoT with the Thingspeak application. The parameters measured include the PV top and bottom surface temperatures and output current and voltage, the surface temperatures of the TEG's hot and cold sides, their respective current and voltage outputs, air humidity, and solar intensity. This IoT-based monitoring system experimental method utilizes two types of PV, polycrystalline and monocrystalline, each rated at 50 Wp, in a hybrid configuration with 5 TEG modules attached to the back of the solar panel. The monitoring design results indicate that sensor measurements were accurate and data readings were reliable. The temperature difference between the two sides of the TEG was measured up to 21.7°C, and the hybrid efficiency of the monocrystalline PV with TEG showed better results compared to the polycrystalline setup, achieving optimum efficiency above 6%, with the PV surface temperature maintained at an average of 50°C. Additionally, IoT monitoring revealed the effect of air humidity on TEG performance: lower air humidity resulted in a larger?T, peaking at 21.7°C with humidity at 39.1%. Therefore, this study recommends using IoT technology for observational data collection on system performance, particularly for PV and TEG, with sensor component modifications tailored to the characteristics of the targeted sensor object.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 116 tautan kepenulisan bersama · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tadulako University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nirmala Efri HasibuanAfiliasi tidak diketahui4
Aulia AzkaAfiliasi tidak diketahui4
Sumartini SumartiniAfiliasi tidak diketahui4
Putri Wening RatriniaAfiliasi tidak diketahui3
Luchiandini Ika PamaharyaniAfiliasi tidak diketahui3
Andhika Jaya PutraAfiliasi tidak diketahui2
Hisam AhyaniAfiliasi tidak diketahui2
Haris Maiza PutraAfiliasi tidak diketahui2
Mohammad TakdirAfiliasi tidak diketahui2
Eko Novi SaputraAfiliasi tidak diketahui2
Muh SuryonoAfiliasi tidak diketahui2
Danny Syamsu WAfiliasi tidak diketahui1
Andi Idhan MuchsinAfiliasi tidak diketahui1
Tri WahyuningsihTadulako University1
KhairinrahmatTadulako University1
Muhammad BakriTadulako University1
Yuli Asmi RahmanTadulako University1
BakriTadulako University1
Rizaldi MaadjiTadulako University1
Chairunnisa Ar LamasitudjuTadulako University1
Wahidah WahidahAfiliasi tidak diketahui1
Teuku ZulfikarAfiliasi tidak diketahui1
Siti KomariyahAfiliasi tidak diketahui1
Lilis YuliatiAfiliasi tidak diketahui1
Nely SupeniAfiliasi tidak diketahui1
Muh. Asharif SulemanAfiliasi tidak diketahui1
Zulfi IdayantiAfiliasi tidak diketahui1
Ahmad HilmiAfiliasi tidak diketahui1
SRI WAHYUNIAfiliasi tidak diketahui1
Khaidzir Hj. IsmailAfiliasi tidak diketahui1
Ahmad Mahfudzi MafrudloAfiliasi tidak diketahui1
Apri MujiyantiAfiliasi tidak diketahui1
Muhamad SuryonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Design of Comprehensive Monitoring on Hybrid Photovoltaic and Thermoelectric Generator Using IoT</dc:title>
	<dc:creator xml:lang="en">Rahman, Yuli Asmi</dc:creator>
	<dc:creator xml:lang="en">Adam, Andi Arham</dc:creator>
	<dc:creator xml:lang="en">Samnur, Samnur</dc:creator>
	<dc:creator xml:lang="en">Basri, Basri</dc:creator>
	<dc:creator xml:lang="en">Anwar, Khairil</dc:creator>
	<dc:creator xml:lang="en">Hatib, Rustan</dc:creator>
	<dc:creator xml:lang="en">Mustofa, Mustofa</dc:creator>
	<dc:subject xml:lang="en">Thingspeak-Blynk</dc:subject>
	<dc:subject xml:lang="en">Iot Monitoring</dc:subject>
	<dc:subject xml:lang="en">Hibrid PV-TEG</dc:subject>
	<dc:subject xml:lang="en">Measurement Sensor</dc:subject>
	<dc:description xml:lang="en">The study aims to design and develop a more efficient measurement monitoring system based on influential parameters for the performance of hybrid PV and TEG modules using IoT with the Thingspeak application. The parameters measured include the PV top and bottom surface temperatures and output current and voltage, the surface temperatures of the TEG's hot and cold sides, their respective current and voltage outputs, air humidity, and solar intensity. This IoT-based monitoring system experimental method utilizes two types of PV, polycrystalline and monocrystalline, each rated at 50 Wp, in a hybrid configuration with 5 TEG modules attached to the back of the solar panel. The monitoring design results indicate that sensor measurements were accurate and data readings were reliable. The temperature difference between the two sides of the TEG was measured up to 21.7°C, and the hybrid efficiency of the monocrystalline PV with TEG showed better results compared to the polycrystalline setup, achieving optimum efficiency above 6%, with the PV surface temperature maintained at an average of 50°C. Additionally, IoT monitoring revealed the effect of air humidity on TEG performance: lower air humidity resulted in a larger ?T, peaking at 21.7°C with humidity at 39.1%. Therefore, this study recommends using IoT technology for observational data collection on system performance, particularly for PV and TEG, with sensor component modifications tailored to the characteristics of the targeted sensor object.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2024-12-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/5764</dc:identifier>
	<dc:identifier>10.37385/jaets.v6i1.5764</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 6 No. 1 (2024): Journal of Applied Engineering and Technological Science (JAETS); 238-248</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v6i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/5764/3688</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>