Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

DATA PREPARATION FOR WATER INJECTION LABORATORY TEST

Scientific Contributions Oil and Gas · Vol. 27 No. 1 (2022) · hlm. 16–21

DOI
10.29017/SCOG.27.1.1046
ISSN
2541-0520, 2089-3361
Terbit
2022-03-30
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Oil production limit that is usually followed by decrease of oil productivity in old fields is a major problem and can't be avoided. This case happened when cumulative oil production has approached primary recovery method. Decrease of the action of native reservoir energy is followed by drastically increase of production of water (saturation almost 100 %). In relation to this, a method is needed to obtain the additional oil recovery. Water injection method is one of the solutions to solve oil production problem that happened in old fields. It is expected that by using water injection method, productivity and oil recovery in old fields can be improved. Water that is used as the fluid injected into reservoir to improve oil recovery is sea water. How far oil recovery can be improved by using water injection method, is determined by a laboratory research. Before carrying out water injection laboratory test; one has to know what are the main points that play important role in determining the optimal oil recovery by water injection method. These are: firstly, basic parameters, secondly, laboratory test for water flooding, thirdly, the displacement of water injection process, then, standard operational procedure, next, water injection to obtain the additional oil recovey, lastly, the results are plotted a figure and or tabulated as the result of water injection laboratory test is obtained. In relation to the mentioned above, it will be better to write a scientific paper of water injection laboratory test. This paper is written based on our experience in enhanced oil recovery research (EOR), supported by textbook, such ás American Petroleum Institute, Petroleum Production Handbook and Standard Corrosion and water Technology For Petroleum Producers. Therefore, the main focus of this paper is "Data Preparation for Water Injection Laboratory Test". Hopefully, the contents of this paper give precious and useful informations, that is extremely valuable not only for LEMIGAS as Research and Development Centre for Oil and Gas technology, but also for the oil industry of the Departement of Petroleum Engineering of the universities in Indonesia

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 128 tautan kepenulisan bersama · 2 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • Cenderawasih University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rahim AkaUniversitas Halu Oleo4
Harapin HafidUniversitas Halu Oleo4
Amiluddin IndiUniversitas Halu Oleo3
Sariati SariatiUniversitas Halu Oleo2
La Ode Arsad SaniUniversitas Halu Oleo2
Muhammad DiwanUniversitas Halu Oleo2
La MalesiUniversitas Halu Oleo2
Astriana NapirahUniversitas Halu Oleo2
Panca WahyudiAfiliasi tidak diketahui2
Dian AgustinaUniversitas Halu Oleo1
Sri JumiatiUniversitas Halu Oleo1
Nusdiani NusdianiUniversitas Halu Oleo1
Adnan SyamUniversitas Halu Oleo1
Hasmirawati HasmirawatiUniversitas Halu Oleo1
Sufardiman SufardimanAfiliasi tidak diketahui1
Muh. Amrullah PagalaAfiliasi tidak diketahui1
Salwati SalwatiAfiliasi tidak diketahui1
Ari FridayantoUniversitas Halu Oleo1
Hamdan HasUniversitas Halu Oleo1
Ridwan Syah AliminAfiliasi tidak diketahui1
Rusli BadaruddinUniversitas Halu Oleo1
Sitti Marni RuhanaUniversitas Halu Oleo1
Andarias Julias WijayaUniversitas Halu Oleo1
Munaji Dwi AnantoUniversitas Halu Oleo1
Yuliana YulianaCenderawasih University1
La Ode Ba’aUniversitas Halu Oleo1
Muhammad MuhlisinUniversitas Halu Oleo1
Fitrianingsih FitrianingsihUniversitas Halu Oleo1
Nur Santy AsminayaUniversitas Halu Oleo1
Rachmita Dewi S. TobaUniversitas Halu Oleo1
Asma Bio KimestriUniversitas Halu Oleo1
Andi Murlina TasseUniversitas Halu Oleo1
Indra MuhamadUniversitas Halu Oleo1
Muhammad Ulum Al-dinUniversitas Halu Oleo1
Asep IndraAfiliasi tidak diketahui1
Fitriani FitrianiUniversitas Halu Oleo1
Milasari MilasariAfiliasi tidak diketahui1
Elfia ElfiaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">DATA PREPARATION FOR WATER INJECTION LABORATORY TEST</dc:title>
	<dc:creator xml:lang="en">Makmur, Tjuwati</dc:creator>
	<dc:creator xml:lang="en">Nuraini, Nuraini</dc:creator>
	<dc:subject xml:lang="en">Water Injection</dc:subject>
	<dc:subject xml:lang="en">Laboratory</dc:subject>
	<dc:subject xml:lang="en">Primary Recovery</dc:subject>
	<dc:description xml:lang="en">Oil production limit that is usually followed by decrease of oil productivity in old fields is a major problem and can't be avoided. This case happened when cumulative oil production has approached primary recovery method. Decrease of the action of native reservoir energy is followed by drastically increase of production of water (saturation almost 100 %). In relation to this, a method is needed to obtain the additional oil recovery. Water injection method is one of the solutions to solve oil production problem that happened in old fields. It is expected that by using water injection method, productivity and oil recovery in old fields can be improved. Water that is used as the fluid injected into reservoir to improve oil recovery is sea water. How far oil recovery can be improved by using water injection method, is determined by a laboratory research. Before carrying out water injection laboratory test; one has to know what are the main points that play important role in determining the optimal oil recovery by water injection method. These are: firstly, basic parameters, secondly, laboratory test for water flooding, thirdly, the displacement of water injection process, then, standard operational procedure, next, water injection to obtain the additional oil recovey, lastly, the results are plotted a figure and or tabulated as the result of water injection laboratory test is obtained. In relation to the mentioned above, it will be better to write a scientific paper of water injection laboratory test. This paper is written based on our experience in enhanced oil recovery research (EOR), supported by textbook, such ás American Petroleum Institute, Petroleum Production Handbook and Standard Corrosion and water Technology For Petroleum Producers. Therefore, the main focus of this paper is "Data Preparation for Water Injection Laboratory Test". Hopefully, the contents of this paper give precious and useful informations, that is extremely valuable not only for LEMIGAS as Research and Development Centre for Oil and Gas technology, but also for the oil industry of the Departement of Petroleum Engineering of the universities in Indonesia</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1046</dc:identifier>
	<dc:identifier>10.29017/SCOG.27.1.1046</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 27 No. 1 (2004); 16-21</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 27 No 1 (2004); 16-21</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1046/835</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 1970 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>