Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Fatigue Test of Plastics and Manufacturing Collet Nut Driver for Integrated Rotating Bending Fatigue Test Machine

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 24 No. 3 (2024) · hlm. 110–116

DOI
10.31940/logic.v24i3.110-116
ISSN
2580-5649, 1412-114X
Terbit
2024-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

The unknown fatigue life of injection molded plastic materials and the ineffectiveness of clamping both ends of the specimen in the collet of the Integrated Rotary Bending Fatigue Testing Machine with manual tightening and loosening are the obstacles faced. The purpose of testing and making a collet nut driver is to obtain a prediction of the fatigue life of injection molded plastic materials and to increase the effectiveness of clamping the end of the specimen with the help of a DC motor drive. The research method uses experiments which include injection molding of plastic materials of the type Polypropylene (PP) and Acrylonitrile Butadiene Styrene (ABS), checking the straightness and surface finishing of the specimen, fatigue testing at 1800, 2000, 2200 rpm, analysis of fatigue test results, and design-manufacturing collet nut drive with DC motor drive and transmission of a pair of spiral cone gears, manufacture of DC motor sliding movement mechanism along the reach of both ends of the specimen, installation of electric power circuits for direction and electric current switches for clockwise and counterclockwise rotation functions, and analysis of the results of the fatigue test and performance of the collet nut driver The results of fatigue testing at a bending stress (S) of 68 MPa for PP material show that at 1800 rpm, the fatigue life (N) was obtained at 2,014,605 cycles and at 2200 rpm, N was obtained at 1,506,486 cycles. Meanwhile, for ABS specimens, at 1800 rpm, N was obtained at 1,547,106 cycles and at 2200 rpm, N was obtained at 1,190,425 cycles, which means PP material has a longer fatigue life compared to ABS. The test results of the DC motor drive on the collet nut showed that the duration of tightening/loosening was 4.4 times faster than manually, which originally had a duration of 66 seconds, down to just 15 seconds for the DC motor drive.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 101 tautan kepenulisan bersama · 42 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • University of Sarjanawiyata Tamansiswa
  • State University of Malang
  • Politeknik Pertanian Negeri Pangkajene Kepulauan
  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Politeknik Negeri Madiun
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Talifatim MachfurohPoliteknik Negeri Malang3
Siti Duratun Nasiqiati RosadyPoliteknik Negeri Malang3
Hayuni Retno WidartiState University of Malang2
Deni Ainur RokhimState University of Malang2
Indrazno SiradjuddinPoliteknik Negeri Malang2
Nila AliaPoliteknik Negeri Malang2
Hangga WicaksonoPoliteknik Negeri Malang2
Andri SetiawanPoliteknik Negeri Malang2
Muhammad RiyadiPoliteknik Pertanian Negeri Pangkajene Kepulauan1
Irawan IlhamPoliteknik Pertanian Negeri Pangkajene Kepulauan1
M. MuchsonAfiliasi tidak diketahui1
Moh. Ilmanul HakimState University of Malang1
SutrisnoAfiliasi tidak diketahui1
Eko Sulkhany YuliantoUniversity of Sarjanawiyata Tamansiswa1
Tito Aji MilleniawanUniversity of Sarjanawiyata Tamansiswa1
Mohammad Ahyar Syafwan LysanderUniversity of Sarjanawiyata Tamansiswa1
Shahnur Al-HafriUniversity of Sarjanawiyata Tamansiswa1
Didik SubiyantoUniversity of Sarjanawiyata Tamansiswa1
Tri Aji PurnomoUniversity of Sarjanawiyata Tamansiswa1
Nanang QosimPoliteknik Negeri Malang1
Am. MufarrihPoliteknik Negeri Malang1
Zakki Fuadi EmzainPoliteknik Negeri Malang1
Erni YudaningtyasUniversity of Brawijaya1
Denda DewatamaPoliteknik Negeri Malang1
Rendi Pambudi WicaksonoPoliteknik Negeri Madiun1
Mila FauziyahPoliteknik Negeri Malang1
Marizan SulaimanUniversiti Teknikal Malaysia Melaka1
Ahmad Burhanudin FahmiState University of Malang1
I Made WirawanState University of Malang1
Abdul Syukor Mohamad JayaUniversiti Teknikal Malaysia Melaka1
Mahfud JionoPoliteknik Negeri Malang1
Ferdian RonilayaPoliteknik Negeri Malang1
Ratna Ika PutriPoliteknik Negeri Malang1
Ika Noer SyamsianaPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Fatigue Test of Plastics and Manufacturing Collet Nut Driver for Integrated Rotating Bending Fatigue Test Machine</dc:title>
	<dc:creator>Tri Setyo Aji Cahyono</dc:creator>
	<dc:creator>Hadi, Syamsul</dc:creator>
	<dc:creator>Rico Wahyu Pratama</dc:creator>
	<dc:creator>Zakiyah Amalia</dc:creator>
	<dc:creator>Fica Aida Nadhifatul Aini</dc:creator>
	<dc:creator>Kadir, Aini Zuhra Binti Abdul</dc:creator>
	<dc:subject xml:lang="en-US">Acrylonitrile Butadiene Styrene (ABS)</dc:subject>
	<dc:subject xml:lang="en-US">Collet Nut Driver</dc:subject>
	<dc:subject xml:lang="en-US">Fatigue Life</dc:subject>
	<dc:subject xml:lang="en-US">Injection Molding</dc:subject>
	<dc:subject xml:lang="en-US">Polypropylene (PP)</dc:subject>
	<dc:description xml:lang="en-US">The unknown fatigue life of injection molded plastic materials and the ineffectiveness of clamping both ends of the specimen in the collet of the Integrated Rotary Bending Fatigue Testing Machine with manual tightening and loosening are the obstacles faced. The purpose of testing and making a collet nut driver is to obtain a prediction of the fatigue life of injection molded plastic materials and to increase the effectiveness of clamping the end of the specimen with the help of a DC motor drive. The research method uses experiments which include injection molding of plastic materials of the type Polypropylene (PP) and Acrylonitrile Butadiene Styrene (ABS), checking the straightness and surface finishing of the specimen, fatigue testing at 1800, 2000, 2200 rpm, analysis of fatigue test results, and design-manufacturing collet nut drive with DC motor drive and transmission of a pair of spiral cone gears, manufacture of DC motor sliding movement mechanism along the reach of both ends of the specimen, installation of electric power circuits for direction and electric current switches for clockwise and counterclockwise rotation functions, and analysis of the results of the fatigue test and performance of the collet nut driver The results of fatigue testing at a bending stress (S) of 68 MPa for PP material show that at 1800 rpm, the fatigue life (N) was obtained at 2,014,605 cycles and at 2200 rpm, N was obtained at 1,506,486 cycles. Meanwhile, for ABS specimens, at 1800 rpm, N was obtained at 1,547,106 cycles and at 2200 rpm, N was obtained at 1,190,425 cycles, which means PP material has a longer fatigue life compared to ABS. The test results of the DC motor drive on the collet nut showed that the duration of tightening/loosening was 4.4 times faster than manually, which originally had a duration of 66 seconds, down to just 15 seconds for the DC motor drive.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2024-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1912</dc:identifier>
	<dc:identifier>10.31940/logic.v24i3.110-116</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 24 No. 3 (2024): November; 110-116</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v24i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1912/955</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>