Melola Discovery

← Melola Discovery

Jurnal

STUDI EKSPERIMEN PENGARUH KECEPATAN PUTAR MESIN PENGGERAK KOMPRESOR PADA SISTEM KELISTRIKAN AC MOBIL

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 1 (2018)

DOI
10.55679/enthalpy.v3i1.3625
ISSN
2502-8944
Published
2018-03-04
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The cooling process is essentially a process of transfer of heat energy contained in a room. This study aimsto determine the effect of the rotating speed of the compressor driving machine on the optimum cabinoptimum time temperature in the tropics. Equipment used in this research is panel of electrical system of airconditioner. The research method is done by way of experiment directly on the tool with the speedparameters of the engine speed of the compressor with the temperature to be achieved 20 oC, 22 oC, 24 oCdan 26 oC. The results showed that the higher the compressor turn speed the shorter the time required to coolthe cabin. At the engine speed of 1500 rpm, Cp = 293.07 J/mol.K, W = 0.02542 m, top = 0.00219 hours. At2000 rpm engine speed, Cp = 234.48 J/mol.K, W = 0.0285 m, top = 0.00220 hours. At the engine speed of2500 rpm, Cp = 175.88 J/mol.K, W = 0.03303m, top = 0.00222 hours. At 3000 rpm engine speed, Cp =117.275 J/mol.K, W = 0.04059 m, top = 0.00223 hours. At the speed of 3000 rpm compressor engine speedobtained the actual time of the shortest tact = 2.073 minutes and the optimum time top = 0.00223 hours.Keywords: Compressor, temperature, time, AC panel, and propulsion.

Collaboration network of the authors

40 authors · 221 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Samhuddin SamhuddinAffiliation unknown17
Lukas Kano MangallaUniversitas Halu Oleo9
Yuspian GunawanAffiliation unknown9
Abd KadirUniversitas Halu Oleo9
Aminur AminurUniversitas Halu Oleo8
Prinob AksarUniversitas Halu Oleo8
Ridway BalakaAffiliation unknown7
Al Ichlas ImranAffiliation unknown7
Salimin SaliminAffiliation unknown6
Sudarsono SudarsonoAffiliation unknown5
La HasanudinUniversitas Halu Oleo5
Kadir KadirAffiliation unknown5
La Ode Ahmad BarataAffiliation unknown3
Nanang EndriatnoAffiliation unknown3
Muhammad HasbiUniversitas Syiah Kuala3
Jaka Seru Dwi SaputraAffiliation unknown2
Agustinus LolokAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
Robin RobinUniversitas Halu Oleo1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
Luther PagillingAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Asad SyahdanAffiliation unknown1
Asar AsarAffiliation unknown1
Herbianto AntoAffiliation unknown1
Harman SaidAffiliation unknown1
Ambo SakkaAffiliation unknown1
Angga Zeptiawan SastalAffiliation unknown1
Muh. Azim Panca WardanaAffiliation unknown1
Arsin SisaAffiliation unknown1
Idris IdrisAffiliation unknown1
Tri AgustiAffiliation unknown1
Rasyid RasminAffiliation unknown1
La SarifAffiliation unknown1
Muh Rahmat LukmanAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">STUDI EKSPERIMEN PENGARUH KECEPATAN PUTAR MESIN PENGGERAK KOMPRESOR PADA SISTEM KELISTRIKAN AC MOBIL</dc:title>
	<dc:creator>Esparuling, Esparuling</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:creator>Hasanuddin, La</dc:creator>
	<dc:description xml:lang="en-US">The cooling process is essentially a process of transfer of heat energy contained in a room. This study aimsto determine the effect of the rotating speed of the compressor driving machine on the optimum cabinoptimum time temperature in the tropics. Equipment used in this research is panel of electrical system of airconditioner. The research method is done by way of experiment directly on the tool with the speedparameters of the engine speed of the compressor with the temperature to be achieved 20 oC, 22 oC, 24 oCdan 26 oC. The results showed that the higher the compressor turn speed the shorter the time required to coolthe cabin. At the engine speed of 1500 rpm, Cp = 293.07 J/mol.K, W = 0.02542 m, top = 0.00219 hours. At2000 rpm engine speed, Cp = 234.48 J/mol.K, W = 0.0285 m, top = 0.00220 hours. At the engine speed of2500 rpm, Cp = 175.88 J/mol.K, W = 0.03303m, top = 0.00222 hours. At 3000 rpm engine speed, Cp =117.275 J/mol.K, W = 0.04059 m, top = 0.00223 hours. At the speed of 3000 rpm compressor engine speedobtained the actual time of the shortest tact = 2.073 minutes and the optimum time top = 0.00223 hours.Keywords: Compressor, temperature, time, AC panel, and propulsion.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-03-04</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3625</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i1.3625</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 1 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3625/2756</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 ENTHALPY</dc:rights>
</oai_dc:dc>