Melola Discovery

← Melola Discovery

Jurnal

ANALISA PENGARUH PENGELASAN LISTRIK TERHADAP SIFAT MEKANIK BAJA KARBON RENDAH DAN BAJA KARBON TINGGI

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 2 No. 2 (2017)

DOI
10.55679/enthalpy.v2i2.2924
ISSN
2502-8944
Published
2017-10-25
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The process welding which in principle is connecting two or more components, more rightly aimed toassemble ( assembly ) several components into one form of machine. The purpose of this research is to findthe mechanical force low carbon steel and high carbon steel. Material of this research is low carbon steelplate thick of 10 mm and high carbon steel of a spring thick 10 mm. the process welding use electrodesE6013 and E7016 by the angle v. Test in do is testing pull and testing hardness brinell.Where testing pull,tensile strength on the highest low carbon steel found in specimens 2 namely 44,92 kg/mm2.While in testingpul high carbon steel tensile strength is highest in specimens column material that is 91,35 kg /mm2. ForBrinell Hardness Test, the highest hardness HAZ to low carbon steel is on a point of 1 and 3 namely 104,53kg/ mm2. While highest hardness HAZ to high carbon steel is at that point 1 namely 201,03 kg / mm2.Keywords: welding, tensile strength and hardness

Collaboration network of the authors

40 authors · 225 co-authorship links · 6 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Universitas Islam Negeri Mahmud Yunus Batusangkar
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown11
Prinob AksarUniversitas Halu Oleo11
Sudarsono SudarsonoAffiliation unknown8
Salimin SaliminAffiliation unknown8
Aminur AminurUniversitas Halu Oleo8
Abd KadirUniversitas Halu Oleo7
Ridway BalakaAffiliation unknown7
Samhuddin SamhuddinAffiliation unknown6
Kadir KadirAffiliation unknown6
Al Ichlas ImranAffiliation unknown5
La HasanudinUniversitas Halu Oleo4
Muhammad HasbiUniversitas Syiah Kuala4
Lukas Kano MangallaUniversitas Halu Oleo3
Raden Rinova SisworoUniversitas Halu Oleo3
La Ode Ahmad BarataAffiliation unknown3
Jenny DellyAffiliation unknown2
Agustinus LolokAffiliation unknown2
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
La HasanuddinAffiliation unknown1
Asad SyahdanAffiliation unknown1
R BalakaAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Lukas Kano MangalaAffiliation unknown1
Safarno SafarnoAffiliation unknown1
Rachmad SughiandiAffiliation unknown1
Andi YantoAffiliation unknown1
Andi Tri SetiawanAffiliation unknown1
Muhammad IkhsanAffiliation unknown1
Budiman BudimanAffiliation unknown1
Salman MusliminAffiliation unknown1
Fadel Alfahri FahriAffiliation unknown1
Samidun SamidunAffiliation unknown1
laode IrfanAffiliation unknown1
Irwan IrwanUniversitas Islam Negeri Mahmud Yunus Batusangkar1
Angga Zeptiawan SastalAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">ANALISA PENGARUH PENGELASAN LISTRIK TERHADAP SIFAT MEKANIK BAJA KARBON RENDAH DAN BAJA KARBON TINGGI</dc:title>
	<dc:creator>Gunawan, Yuspian</dc:creator>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:creator>Anggara, Bayu Hari</dc:creator>
	<dc:description xml:lang="en-US">The process welding which in principle is connecting two or more components, more rightly aimed toassemble ( assembly ) several components into one form of machine. The purpose of this research is to findthe mechanical force low carbon steel and high carbon steel. Material of this research is low carbon steelplate thick of 10 mm and high carbon steel of a spring thick 10 mm. the process welding use electrodesE6013 and E7016 by the angle v . Test in do is testing pull and testing hardness brinell .Where testing pull ,tensile strength on the highest low carbon steel found in specimens 2 namely 44,92 kg/mm2 .While in testingpul high carbon steel tensile strength is highest in specimens column material that is 91,35 kg /mm2. ForBrinell Hardness Test, the highest hardness HAZ to low carbon steel is on a point of 1 and 3 namely 104,53kg/ mm2. While highest hardness HAZ to high carbon steel is at that point 1 namely 201,03 kg / mm2.Keywords: welding, tensile strength and hardness</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2017-10-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/2924</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v2i2.2924</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 2, No 2 (2017): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v2i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/2924/2181</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 ENTHALPY</dc:rights>
</oai_dc:dc>