Melola Discovery

← Melola Discovery

Jurnal

PENGARUH KECEPATAN POTONG TERHADAP PERUBAHAN TEMPERATUR PAHAT DAN KEAUSAN PAHAT BUBUT PADA PROSES PEMBUBUTAN BAJA KARBON SEDANG

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 1 (2018)

DOI
10.55679/enthalpy.v3i1.3626
ISSN
2502-8944
Published
2018-03-04
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

This research aims to know the influence of the speed rotation spindle against wear and tear andtemperature change the chisel on the process medium carbon steel lathing. This research isexperimental method research by conducting medium carbon steel lathe by using chisel of HighSpeed Steel (HSS) lathe. Rotation speed of 1500 rpm lathe spindle, 1050 rpm and 750 rpm with adepth of cut of 0,5 mm and a 0,5 mm/min feed speed shall be performed every 1 times thepulverizing prises with a slashed workpiece length of 50 mm. Every spindle rotation speed is done3 times the lathe process. Lathe wear and chisel lathe are measured every 1 time of the latheexperiment. The test results in this research show that the speed of rotation of the spindle lathes towear and temperature at 1500 rpm spindle round earned the highest wear 0,463 mm at round 750rpm value acquired spindle lowest wear 0,150 mm, while at 1500 rpm spindle rotation obtained thehighest temperature value of 126,3oC and at 750 rpm spindle spin obtained lowest temperature65,0oC.Keywords: Spindle rotation, steel, HSS, wear and temperature.

Collaboration network of the authors

40 authors · 229 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Samhuddin SamhuddinAffiliation unknown18
Prinob AksarUniversitas Halu Oleo15
Abd KadirUniversitas Halu Oleo13
Lukas Kano MangallaUniversitas Halu Oleo12
Aminur AminurUniversitas Halu Oleo11
Ridway BalakaAffiliation unknown9
Salimin SaliminAffiliation unknown9
La HasanudinUniversitas Halu Oleo8
Sudarsono SudarsonoAffiliation unknown6
Kadir KadirAffiliation unknown6
Al Ichlas ImranAffiliation unknown6
Nanang EndriatnoAffiliation unknown6
Muhammad HasbiUniversitas Syiah Kuala5
La Ode Ahmad BarataAffiliation unknown4
Raden Rinova SisworoUniversitas Halu Oleo3
Jenny DellyAffiliation unknown3
Agustinus LolokAffiliation unknown3
Jaka Seru Dwi SaputraAffiliation unknown2
Nasrul NasrulUniversitas Halu Oleo2
LA KARIMUNAUniversitas Halu Oleo2
La Ode MagribiAffiliation unknown2
La HasanuddinAffiliation unknown2
Luther PagillingAffiliation unknown1
Asad SyahdanAffiliation unknown1
R BalakaAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Asar AsarAffiliation unknown1
Esparuling EsparulingAffiliation unknown1
Safarno SafarnoAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Budiman BudimanAffiliation unknown1
Salman MusliminAffiliation unknown1
Fadel Alfahri FahriAffiliation unknown1
Herbianto AntoAffiliation unknown1
Harman SaidAffiliation unknown1
laode IrfanAffiliation unknown1
Ambo SakkaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PENGARUH KECEPATAN POTONG TERHADAP PERUBAHAN TEMPERATUR PAHAT DAN KEAUSAN PAHAT BUBUT PADA PROSES PEMBUBUTAN BAJA KARBON SEDANG</dc:title>
	<dc:creator>Sastal, Angga Zeptiawan</dc:creator>
	<dc:creator>Gunawan, Yuspian</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:description xml:lang="en-US">This research aims to know the influence of the speed rotation spindle against wear and tear andtemperature change the chisel on the process medium carbon steel lathing. This research isexperimental method research by conducting medium carbon steel lathe by using chisel of HighSpeed Steel (HSS) lathe. Rotation speed of 1500 rpm lathe spindle, 1050 rpm and 750 rpm with adepth of cut of 0,5 mm and a 0,5 mm/min feed speed shall be performed every 1 times thepulverizing prises with a slashed workpiece length of 50 mm. Every spindle rotation speed is done3 times the lathe process. Lathe wear and chisel lathe are measured every 1 time of the latheexperiment. The test results in this research show that the speed of rotation of the spindle lathes towear and temperature at 1500 rpm spindle round earned the highest wear 0,463 mm at round 750rpm value acquired spindle lowest wear 0,150 mm, while at 1500 rpm spindle rotation obtained thehighest temperature value of 126,3oC and at 750 rpm spindle spin obtained lowest temperature65,0oC.Keywords: Spindle rotation, steel, HSS, wear and temperature.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-03-04</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3626</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i1.3626</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 1 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3626/2757</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 ENTHALPY</dc:rights>
</oai_dc:dc>