Melola Discovery

← Melola Discovery

Jurnal

Pengaruh Penambahan Slag Nikel Dan Cacahan Plastik Terhadap Kekuatan Tekan Paving Block

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 6 No. 1 (2022) · pp. 7–11

DOI
10.55679/enthalpy.v6i1.19127
ISSN
2502-8944
Published
2022-03-14
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

This study aims to analyze the addition of nickel slag and crushed plastic into the paving block on the compressive strength. Paving blocks were made by conventional methods. Samples were made and tested according to SNI 03-0691-1996 standards. After molded, the paving blocks were dried within 28 days. After that, the materials were placed on a compression test device to determine the compressive strength. The results of the compression test showed that the maximum compressive strength value was owned by sample B with a value of 210.8 kg/cm2 with a volume composition of 25% cement, 5% coarse aggregate, 30% nickel slag, 5% fine aggregate, and 35% crushed plastic. The minimum compressive strength was found in sample A with a value of 129.17 kg/cm2 with a mixture composition of 25% cement, 25% coarse aggregate and 50% fine aggregate. From this study, it was found that there was an increase in the compressive strength of the paving block after the addition of chopped plastic and nickel slag.Keywords: paving block, slag nickel, plastic chopping, compressive strength

Collaboration network of the authors

40 authors · 250 co-authorship links · 6 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Universitas Islam Negeri Mahmud Yunus Batusangkar
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Kadir KadirAffiliation unknown11
Budiman SudiaAffiliation unknown10
Salimin SaliminAffiliation unknown10
Sudarsono SudarsonoAffiliation unknown10
Aminur AminurUniversitas Halu Oleo10
Yuspian GunawanAffiliation unknown9
Ridway BalakaAffiliation unknown9
Samhuddin SamhuddinAffiliation unknown8
Al Ichlas ImranAffiliation unknown8
La HasanudinUniversitas Halu Oleo7
Prinob AksarUniversitas Halu Oleo7
Muhammad HasbiUniversitas Syiah Kuala5
Lukas Kano MangallaUniversitas Halu Oleo3
Agustinus LolokAffiliation unknown3
La Ode Ahmad BarataAffiliation unknown3
La HasanuddinAffiliation unknown2
R BalakaAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
Irwan IrwanUniversitas Islam Negeri Mahmud Yunus Batusangkar2
Faraditha AmeliaUniversitas Halu Oleo1
Waode ZulkaidahUniversitas Halu Oleo1
Sahabuddin HayUniversitas Halu Oleo1
Feliks Eldad LarobuUniversitas Halu Oleo1
Agustina LolokUniversitas Halu Oleo1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Asad SyahdanAffiliation unknown1
La Ode Muhammad MunandriAffiliation unknown1
Laode SaefuddinAffiliation unknown1
Adnal AdnalAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Irma NurjannahAffiliation unknown1
Luther PagilingAffiliation unknown1
Ld.M.Golok JayaAffiliation unknown1
P AksarAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengaruh Penambahan Slag Nikel Dan Cacahan Plastik Terhadap Kekuatan Tekan Paving Block</dc:title>
	<dc:creator>Huzaifa, Huzaifa</dc:creator>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:creator>Kadir, Abd.</dc:creator>
	<dc:description xml:lang="en-US">This study aims to analyze the addition of nickel slag and crushed plastic into the paving block on the compressive strength. Paving blocks were made by conventional methods. Samples were made and tested according to SNI 03-0691-1996 standards. After molded, the paving blocks were dried within 28 days. After that, the materials were placed on a compression test device to determine the compressive strength. The results of the compression test showed that the maximum compressive strength value was owned by sample B with a value of 210.8 kg/cm2 with a volume composition of 25% cement, 5% coarse aggregate, 30% nickel slag, 5% fine aggregate, and 35% crushed plastic. The minimum compressive strength was found in sample A with a value of 129.17 kg/cm2 with a mixture composition of 25% cement, 25% coarse aggregate and 50% fine aggregate. From this study, it was found that there was an increase in the compressive strength of the paving block after the addition of chopped plastic and nickel slag.Keywords: paving block, slag nickel, plastic chopping, compressive strength</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-03-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/19127</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v6i1.19127</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 6, No 1 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 7-11</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v6i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/19127/12215</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 ENTHALPY</dc:rights>
</oai_dc:dc>