Melola Discovery

← Melola Discovery

Jurnal

Analisis Perancangan Alat Pencacah Nilam Untuk Petani Nilam

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 9 No. 1 (2024) · pp. 13–19

DOI
10.55679/enthalpy.v9i1.46935
ISSN
2502-8944
Published
2024-03-02
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The automatic pull shaft on the patchouli chopper is an important component of the patchouli chopper machine. The research aims to carry out an analysis of the patchouli chopper pull shaft and produce a design for the newest patchouli chopper. In this research, the focus was only on the analysis of the pulling shaft on the patchouli chopper where all research methodologies were carried out using inventor software. The main driving engine is a combustion engine with a power of 5.5 HP, S45C shaft material with a tensile strength of 58 kg/mm2, and a shaft diameter of 15 mm. In the selection of pulleys, plays with diameters of 50 mm and 300 mm are used, V - Belt speed is 0.18 m/s, circumference length is 1499 mm, using V - Belt type B with axle distance of 474.6 mm, the contact angle is 2.3 rad and the length of the chopped patchouli was 3.8 cm. From the calculations and analysis, the addition of a pulling shaft to the patchouli chopper is safe to use. Keywords: Patchouli chopping tool, Puller shaft, Patchouli

Collaboration network of the authors

40 authors · 227 co-authorship links · 6 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Universitas Islam Negeri Mahmud Yunus Batusangkar
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo9
Kadir KadirAffiliation unknown8
Budiman SudiaAffiliation unknown8
Sudarsono SudarsonoAffiliation unknown7
Abd KadirUniversitas Halu Oleo7
Yuspian GunawanAffiliation unknown7
Al Ichlas ImranAffiliation unknown7
Salimin SaliminAffiliation unknown7
Prinob AksarUniversitas Halu Oleo6
Agustinus LolokAffiliation unknown4
Samhuddin SamhuddinAffiliation unknown4
La HasanudinUniversitas Halu Oleo4
Lukas Kano MangallaUniversitas Halu Oleo2
La HasanuddinAffiliation unknown2
La Ode Ahmad BarataAffiliation unknown2
Muhammad HasbiUniversitas Syiah Kuala2
Raden Rinova SisworoUniversitas Halu Oleo2
Lukas Kano MangalaAffiliation unknown2
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Asad SyahdanAffiliation unknown1
Laode SaefuddinAffiliation unknown1
Adnal AdnalAffiliation unknown1
Rachmad SughiandiAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Andi YantoAffiliation unknown1
Andi Tri SetiawanAffiliation unknown1
Muhammad IkhsanAffiliation unknown1
Edriyanto EdriyantoAffiliation unknown1
Samidun SamidunAffiliation unknown1
Irwan IrwanUniversitas Islam Negeri Mahmud Yunus Batusangkar1
La Ode UsmanAffiliation unknown1
Mahrun MahrunAffiliation unknown1
Marwin MarwinAffiliation unknown1
Huzaifa HuzaifaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisis Perancangan Alat Pencacah Nilam Untuk Petani Nilam</dc:title>
	<dc:creator>Prananda, Fijay</dc:creator>
	<dc:creator>Balaka, Ridway</dc:creator>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:description xml:lang="en-US">The automatic pull shaft on the patchouli chopper is an important component of the patchouli chopper machine. The research aims to carry out an analysis of the patchouli chopper pull shaft and produce a design for the newest patchouli chopper. In this research, the focus was only on the analysis of the pulling shaft on the patchouli chopper where all research methodologies were carried out using inventor software. The main driving engine is a combustion engine with a power of 5.5 HP, S45C shaft material with a tensile strength of 58 kg/mm2, and a shaft diameter of 15 mm. In the selection of pulleys, plays with diameters of 50 mm and 300 mm are used, V - Belt speed is 0.18 m/s, circumference length is 1499 mm, using V - Belt type B with axle distance of 474.6 mm, the contact angle is 2.3 rad and the length of the chopped patchouli was 3.8 cm. From the calculations and analysis, the addition of a pulling shaft to the patchouli chopper is safe to use.
Keywords: Patchouli chopping tool, Puller shaft, Patchouli</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2024-03-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/46935</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v9i1.46935</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 9, No 1 (2024): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 13-19</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v9i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/46935/19962</dc:relation>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/downloadSuppFile/46935/99659</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>