Melola Discovery

← Melola Discovery

Jurnal

Pengaruh Fraksi Volume Pasir Terhadap Kekuatan Bending, Densitas Dan Porositas Keramik Berbahan Dasar Tanah Liat

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 4 No. 3 (2019)

DOI
10.55679/enthalpy.v4i3.10001
ISSN
2502-8944
Published
2019-12-20
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The purpose of this study was to determine the effect of adding clay-based ceramic material sand to physical strength using bending, density, and porosity testing methods. In this study using clay and sand with a volume fraction of clay: sand ie 90:10 %, 80:20 %, 70:30 %, 60: 40 % and 50:50 % printed using mold rectangular size 50 mm long, 8 mm wide and 7 mm thick, then the compaction process is carried out with a pressure of 175 kgf/cm2 or 2500 psi, then the sintering process is carried out at a temperature of 800 OC for 1 hour. The tests carried out are density, porosity and bending tests. The results showed that the density value of the volume fraction of 80:20 % obtained the highest average density value of 0.513 gr/cm³, and the volume fraction of 50:50 % obtained the lowest average density value of 0.458 gr/cm³. In porosity testing with a volume fraction of 50: 50 %, the highest porosity value was 67.619 %, and the volume fraction of 80:20 % obtained the lowest porosity value of 44.381 %. And for bending testing, the effect of volume fraction on bending strength obtained the highest bending strength value of 0.516 N/mm² for the volume fraction of 80: 20 % and the lowest bending strength value obtained with a value of 0.075 N/mm² for 50: 50 % volume fraction.Keywords: Sintering, density, porosity, bending, ceramic

Collaboration network of the authors

40 authors · 234 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo13
Budiman SudiaAffiliation unknown12
Kadir KadirAffiliation unknown10
Samhuddin SamhuddinAffiliation unknown10
Nanang EndriatnoAffiliation unknown8
Al Ichlas ImranAffiliation unknown8
Prinob AksarUniversitas Halu Oleo8
Salimin SaliminAffiliation unknown7
Yuspian GunawanAffiliation unknown7
La HasanudinUniversitas Halu Oleo7
Ridway BalakaAffiliation unknown6
Muhammad HasbiUniversitas Syiah Kuala5
Lukas Kano MangallaUniversitas Halu Oleo3
Agustinus LolokAffiliation unknown3
La Ode Ahmad BarataAffiliation unknown3
La HasanuddinAffiliation unknown2
R BalakaAffiliation unknown2
Edward NgiiUniversitas Halu Oleo2
Emil SalimUniversitas Halu Oleo1
Muhammad Alfito RamadhanAffiliation unknown1
Faraditha AmeliaUniversitas Halu Oleo1
Waode ZulkaidahUniversitas Halu Oleo1
Sahabuddin HayUniversitas Halu Oleo1
Feliks Eldad LarobuUniversitas Halu Oleo1
Agustina LolokUniversitas Halu Oleo1
Ahmad FatsanAffiliation unknown1
Diny DinartiAffiliation unknown1
Ismail MaskromoAffiliation unknown1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Raden Rinova SisworoUniversitas Halu Oleo1
Asad SyahdanAffiliation unknown1
La Ode Muhammad MunandriAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengaruh Fraksi Volume Pasir Terhadap Kekuatan Bending, Densitas Dan Porositas Keramik Berbahan Dasar Tanah Liat</dc:title>
	<dc:creator>Bachtiar, Iyas Muzalif</dc:creator>
	<dc:creator>Sudarsono, Sudarsono</dc:creator>
	<dc:creator>Kadir, Abd .</dc:creator>
	<dc:description xml:lang="en-US">The purpose of this study was to determine the effect of adding clay-based ceramic material sand to physical strength using bending, density, and porosity testing methods. In this study using clay and sand with a volume fraction of clay: sand ie 90:10 %, 80:20 %, 70:30 %, 60: 40 % and 50:50 % printed using mold rectangular size 50 mm long, 8 mm wide and 7 mm thick, then the compaction process is carried out with a pressure of 175 kgf/cm2 or 2500 psi, then the sintering process is carried out at a temperature of 800 OC for 1 hour. The tests carried out are density, porosity and bending tests. The results showed that the density value of the volume fraction of 80:20 % obtained the highest average density value of 0.513 gr/cm³, and the volume fraction of 50:50 % obtained the lowest average density value of 0.458 gr/cm³. In porosity testing with a volume fraction of 50: 50 %, the highest porosity value was 67.619 %, and the volume fraction of 80:20 % obtained the lowest porosity value of 44.381 %. And for bending testing, the effect of volume fraction on bending strength obtained the highest bending strength value of 0.516 N/mm² for the volume fraction of 80: 20 % and the lowest bending strength value obtained with a value of 0.075 N/mm² for 50: 50 % volume fraction.Keywords: Sintering, density, porosity, bending, ceramic</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10001</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v4i3.10001</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 4, No 3 (2019): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v4i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10001/7146</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>