Melola Discovery

← Melola Discovery

Jurnal

Perbandingan Kuat Tekan Paving Blok Berbahan Slag Nikel dengan Penambahan Berbagai Jenis Limbah Plastik

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 5 No. 3 (2020) · pp. 76–80

DOI
10.55679/enthalpy.v5i3.15772
ISSN
2502-8944
Published
2020-12-31
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Indonesia's economic development is currently heavily dependent on the industrial sector which continues to experience rapid development. One of the growing industrial areas is the construction industry, especially infrastructure and property development that requires materials such as block paving. The purpose of this research is to find out the comparison of strong press paving blocks with the addition of nickel slag and plastic cacahan (PET, HDPE, LDPE and PP). This research uses conventional (manual) randomized methods. The results of this study showed that the influence of the addition of nickel slag and plastic cacahan in the manufacture of paving blocks against strong press can be concluded that the addition of nickel and plastic slag with strong characteristics can increase the strength of paving block press. The highest average press strength values were in Sample C samples, with mixed variations (cement 25%, coarse aggregate 5%, slag 25%, fine aggregate 5% and HDPE plastic cacahan 40%). has a press force of 155 kg/cm2 with a quality of C based on SNI 03-0691-1996. The lowest press test results were found in sample E (cement 25%, coarse aggregate 5%, slag 25%, fine aggregate 5% and plastic cacahan PP 40%) with a press test value of 87.5 kg/cm2 with a quality of D based on SNI 03-0691-1996. Keywords: Paving block, Plastic Type, Strong Press

Collaboration network of the authors

40 authors · 255 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown15
Kadir KadirAffiliation unknown13
Prinob AksarUniversitas Halu Oleo12
Samhuddin SamhuddinAffiliation unknown12
Salimin SaliminAffiliation unknown12
Ridway BalakaAffiliation unknown10
Aminur AminurUniversitas Halu Oleo10
La HasanudinUniversitas Halu Oleo9
Al Ichlas ImranAffiliation unknown7
Lukas Kano MangallaUniversitas Halu Oleo6
Agustinus LolokAffiliation unknown5
Muhammad HasbiUniversitas Syiah Kuala5
Sudarsono SudarsonoAffiliation unknown4
Nanang EndriatnoAffiliation unknown4
La HasanuddinAffiliation unknown3
Raden Rinova SisworoUniversitas Halu Oleo3
R BalakaAffiliation unknown3
Jenny DellyAffiliation unknown3
Nasrul NasrulUniversitas Halu Oleo2
LA KARIMUNAUniversitas Halu Oleo2
La Ode MagribiAffiliation unknown2
Asad SyahdanAffiliation unknown2
Raden Rinova SisworoAffiliation unknown2
La Ode Ahmad BarataAffiliation unknown2
Faraditha AmeliaUniversitas Halu Oleo1
Waode ZulkaidahUniversitas Halu Oleo1
Sahabuddin HayUniversitas Halu Oleo1
Feliks Eldad LarobuUniversitas Halu Oleo1
Agustina LolokUniversitas Halu Oleo1
La Ode Amrul HasanAffiliation unknown1
La Ode Muhammad MunandriAffiliation unknown1
Laode SaefuddinAffiliation unknown1
Adnal AdnalAffiliation unknown1
Irma NurjannahAffiliation unknown1
Luther PagilingAffiliation unknown1
Ld.M.Golok JayaAffiliation unknown1
P AksarAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Perbandingan Kuat Tekan Paving Blok Berbahan Slag Nikel dengan Penambahan Berbagai Jenis Limbah Plastik</dc:title>
	<dc:creator>Husein, Laode Muhamad Syawal</dc:creator>
	<dc:creator>Gunawan, Yuspian</dc:creator>
	<dc:creator>Kadir, Abd</dc:creator>
	<dc:description xml:lang="en-US">Indonesia's economic development is currently heavily dependent on the industrial sector  which  continues  to  experience  rapid  development.  One  of  the  growing industrial areas is the construction industry, especially infrastructure and property development  that  requires  materials  such  as  block  paving.  The  purpose  of  this research  is  to  find  out  the  comparison  of  strong  press  paving  blocks  with  the addition of nickel slag and plastic cacahan (PET, HDPE, LDPE and PP). This research uses conventional (manual) randomized methods. The results of this study showed that  the  influence  of  the  addition  of  nickel  slag  and  plastic  cacahan  in  the manufacture  of  paving  blocks  against  strong  press  can  be  concluded  that  the addition  of  nickel  and  plastic  slag  with  strong  characteristics  can  increase  the strength of paving block press. The highest average press strength values were in Sample C samples, with mixed variations (cement 25%, coarse aggregate 5%, slag 25%, fine aggregate 5% and HDPE plastic cacahan 40%). has a press force of 155 kg/cm2 with a quality of C based on SNI 03-0691-1996. The lowest press test results were  found  in  sample  E  (cement  25%,  coarse  aggregate  5%,  slag  25%,  fine aggregate 5% and plastic cacahan PP 40%) with a press test value of 87.5 kg/cm2 with a quality of D based on SNI 03-0691-1996. Keywords: Paving block, Plastic Type, Strong Press </dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/15772</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v5i3.15772</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 5, No 3 (2020): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 76-80</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v5i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/15772/10660</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 ENTHALPY</dc:rights>
</oai_dc:dc>