Melola Discovery

← Melola Discovery

Jurnal

Perancangan dan Desain Alat Press Hidrolik Kapasitas Maksimal 10 Ton

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 4 (2018)

DOI
10.55679/enthalpy.v3i4.5285
ISSN
2502-8944
Published
2018-12-31
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Hydraulic press as a tool for molding material. This study aims to design and design tools with a maximum level of 10 tons and to determine the components and dimensions of the press. In this study the center uses the jack as the center of loading. For the size of this height 78 cm and width45 cm with bolt fasteners using clay steel material with 0.22 (%) C with tensile strength 42 (kg/mm2), shear stress 3 (kg / mm2), and the outer bolt diameter is 60 (mm) with a distance for the 5.5 (mm) M60 bolt crusher. As for the strength of the material from the components of the press tool has a permit voltage of 37 (kg / mm2), a bending moment of 750 x 103 (kg / mm) with a moment of inertia of 360 x 103 (mm4) and a voltage of 31.25 (kg / mm2). For governance factors 1.18 (kg/mm2).Keywords: Tool, hydraulic, design, safety factor

Collaboration network of the authors

40 authors · 207 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Samhuddin SamhuddinAffiliation unknown16
Aminur AminurUniversitas Halu Oleo14
Prinob AksarUniversitas Halu Oleo11
Abd KadirUniversitas Halu Oleo10
Nanang EndriatnoAffiliation unknown10
Lukas Kano MangallaUniversitas Halu Oleo9
Yuspian GunawanAffiliation unknown9
Al Ichlas ImranAffiliation unknown7
La HasanudinUniversitas Halu Oleo6
Ridway BalakaAffiliation unknown5
La Ode Ahmad BarataAffiliation unknown5
Muhammad HasbiUniversitas Syiah Kuala5
Salimin SaliminAffiliation unknown4
Kadir KadirAffiliation unknown3
Jaka Seru Dwi SaputraAffiliation unknown3
Emil SalimUniversitas Halu Oleo1
Muhammad Alfito RamadhanAffiliation unknown1
Ahmad FatsanAffiliation unknown1
Diny DinartiAffiliation unknown1
Ismail MaskromoAffiliation unknown1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
Luther PagillingAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Prinob Aksar AksarAffiliation unknown1
Irma NurjannahAffiliation unknown1
Luther PagilingAffiliation unknown1
Ld.M.Golok JayaAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Edward NgiiUniversitas Halu Oleo1
Achmad Nur AliansyahAffiliation unknown1
Asar AsarAffiliation unknown1
La HasanuddinAffiliation unknown1
Esparuling EsparulingAffiliation unknown1
Rachmad SughiandiAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Perancangan dan Desain Alat Press Hidrolik Kapasitas Maksimal 10 Ton</dc:title>
	<dc:creator>Sarif, La</dc:creator>
	<dc:creator>Sudarsono, Sudarsono</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:description xml:lang="en-US">Hydraulic press as a tool for molding material. This study aims to design and design tools with a maximum level of 10 tons and to determine the components and dimensions of the press. In this study the center uses the jack as the center of loading. For the size of this height 78 cm and width45 cm with bolt fasteners using clay steel material with 0.22 (%) C with tensile strength 42 (kg/mm2), shear stress 3 (kg / mm2), and the outer bolt diameter is 60 (mm) with a distance for the 5.5 (mm) M60 bolt crusher. As for the strength of the material from the components of the press tool has a permit voltage of 37 (kg / mm2), a bending moment of 750 x 103 (kg / mm) with a moment of inertia of 360 x 103 (mm4) and a voltage of 31.25 (kg / mm2). For governance factors 1.18 (kg/mm2).Keywords: Tool, hydraulic, design, safety factor</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5285</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i4.5285</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 4 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5285/3941</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 ENTHALPY</dc:rights>
</oai_dc:dc>