Melola Discovery

← Melola Discovery

Jurnal

Optimalisasi Perancangan Chassis Mobil Listrik Tipe Prototype Menggunakan Autodeks Inventor

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 7 No. 2 (2022) · pp. 57–65

DOI
10.55679/enthalpy.v7i2.25521
ISSN
2502-8944
Published
2022-05-31
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Prototype cars are future vehicles with special designs that maximize efficiency. An important part of the vehicle, one of which is the chassis, which functions to support the passengers, engine, body and the weight of the chassis itself, so it is necessary to design a lightweight and strong chassis. The purpose of this research is to determine and study the stress, strain, displacement and safety factors that occur in the prototype type electric car chassis designed. 3-dimensional design modeling and simulations were performed on Autodesk Inventor software. Based on the simulation results of loading 60kg, the optimal material is aluminum 6061 compared to aluminum 6063 with the results obtained for stress, strain, displacement, and safety factor. on aluminum 6061 with successive values of 59.712 MPa, 0.000796, 1.299 mm, 4.605. While the aluminum 6063 with a value of 59.628 MPa, 0.000806, 1.316 mm, 3.585. The greater the load, the greater the stress and strain.Key words: Chassis, Desingn, Prototype, Simulation

Collaboration network of the authors

40 authors · 214 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown9
Prinob AksarUniversitas Halu Oleo9
Samhuddin SamhuddinAffiliation unknown8
Abd KadirUniversitas Halu Oleo7
Salimin SaliminAffiliation unknown7
Kadir KadirAffiliation unknown5
Ridway BalakaAffiliation unknown5
Aminur AminurUniversitas Halu Oleo5
Lukas Kano MangallaUniversitas Halu Oleo5
Nanang EndriatnoAffiliation unknown4
La HasanudinUniversitas Halu Oleo3
Al Ichlas ImranAffiliation unknown3
Muhammad HasbiUniversitas Syiah Kuala2
Jenny DellyAffiliation unknown2
Agustinus LolokAffiliation unknown2
La HasanuddinAffiliation unknown2
Asad SyahdanAffiliation unknown2
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
R BalakaAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Safarno SafarnoAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Mufli MufliUniversitas Halu Oleo1
Budiman BudimanAffiliation unknown1
La Ode Ahmad BarataAffiliation unknown1
Salman MusliminAffiliation unknown1
Fadel Alfahri FahriAffiliation unknown1
Kadek LanaAffiliation unknown1
laode IrfanAffiliation unknown1
Angga Zeptiawan SastalAffiliation unknown1
Muh. Azim Panca WardanaAffiliation unknown1
Sarudin SarudinAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Optimalisasi Perancangan Chassis Mobil Listrik Tipe Prototype Menggunakan Autodeks Inventor</dc:title>
	<dc:creator>Fredyansah, Muhamad</dc:creator>
	<dc:creator>Gunawan, Yuspian</dc:creator>
	<dc:creator>Sisworo, Raden Rinova</dc:creator>
	<dc:description xml:lang="en-US">Prototype cars are future vehicles with special designs that maximize efficiency. An important part of the vehicle, one of which is the chassis, which functions to support the passengers, engine, body and the weight of the chassis itself, so it is necessary to design a lightweight and strong chassis. The purpose of this research is to determine and study the stress, strain, displacement and safety factors that occur in the prototype type electric car chassis designed. 3-dimensional design modeling and simulations were performed on Autodesk Inventor software. Based on the simulation results of loading 60kg, the optimal material is aluminum 6061 compared to aluminum 6063 with the results obtained for stress, strain, displacement, and safety factor. on aluminum 6061 with successive values of 59.712 MPa, 0.000796, 1.299 mm, 4.605. While the aluminum 6063 with a value of 59.628 MPa, 0.000806, 1.316 mm, 3.585. The greater the load, the greater the stress and strain.Key words: Chassis, Desingn, Prototype, Simulation</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-05-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/25521</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v7i2.25521</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 7, No 2 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 57-65</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v7i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/25521/15070</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>