Melola Discovery

← Melola Discovery

Jurnal

Analisis Distorsi Berbasis Metode Elemen Hingga Pada Proses Pengelasan Kampuh U dan V

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 7 No. 3 (2022) · pp. 129–135

DOI
10.55679/enthalpy.v7i3.27124
ISSN
2502-8944
Published
2022-08-22
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The purpose of the study is to find out the influence of the type of welding on deformation produced by using the element method up to through ansys software. The material used in this study is AlSl 4130 steel material the process of connecting metal or distributing temperature into the connection material is carried out using ansys software with camphor used campuh U and V. The temperature given to the material is 1500°C. The results of the largest deformation research in the U camp are 0.00074711 m while in camphor V the total deformation formed from the welding temperature given is 0.00034381 m. The total difference in deformation formed in each camp is caused by the concentration of temperature that occurs in the material caused by the amount of temperature filling in the camp.keywords: Deformation, welding camp, temperature distribution

Collaboration network of the authors

40 authors · 234 co-authorship links · 5 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • National Research and Innovation Agency
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown15
Samhuddin SamhuddinAffiliation unknown13
Salimin SaliminAffiliation unknown11
Abd KadirUniversitas Halu Oleo10
Aminur AminurUniversitas Halu Oleo8
Ridway BalakaAffiliation unknown7
La HasanudinUniversitas Halu Oleo7
Muhammad HasbiUniversitas Syiah Kuala6
Nanang EndriatnoAffiliation unknown6
Kadir KadirAffiliation unknown5
Sudarsono SudarsonoAffiliation unknown5
Al Ichlas ImranAffiliation unknown5
Lukas Kano MangallaUniversitas Halu Oleo4
Jaka Seru Dwi SaputraAffiliation unknown3
Raden Rinova SisworoUniversitas Halu Oleo3
Jenny DellyAffiliation unknown3
Agustinus LolokAffiliation unknown3
Edward NgiiUniversitas Halu Oleo2
La HasanuddinAffiliation unknown2
R BalakaAffiliation unknown2
Raden Rinova SisworoAffiliation unknown2
La Ode Ahmad BarataAffiliation unknown2
Safarno SafarnoAffiliation unknown2
Fadel Alfahri FahriAffiliation unknown2
laode IrfanAffiliation unknown2
Robin RobinUniversitas Halu Oleo1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
Asad SyahdanAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Achmad Nur AliansyahAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Mufli MufliUniversitas Halu Oleo1
Budiman BudimanAffiliation unknown1
Salman MusliminAffiliation unknown1
Darsono DarsonoNational Research and Innovation Agency1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisis Distorsi Berbasis Metode Elemen Hingga Pada Proses Pengelasan Kampuh U dan V</dc:title>
	<dc:creator>Erikman, Erikman</dc:creator>
	<dc:creator>Gunawan, Yuspian</dc:creator>
	<dc:creator>Aksar, Prinob</dc:creator>
	<dc:description xml:lang="en-US">The purpose of the study is to find out the influence of the type of welding on deformation produced by using the element method up to through ansys software. The material used in this study is AlSl 4130 steel material the process of connecting metal or distributing temperature into the connection material is carried out using ansys software with camphor used campuh U and V. The temperature given to the material is 1500°C. The results of the largest deformation research in the U camp are 0.00074711 m while in camphor V the total deformation formed from the welding temperature given is 0.00034381 m. The total difference in deformation formed in each camp is caused by the concentration of temperature that occurs in the material caused by the amount of temperature filling in the camp.keywords: Deformation, welding camp, temperature distribution </dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-08-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/27124</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v7i3.27124</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 7, No 3 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 129-135</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v7i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/27124/15980</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>