Melola Discovery

← Melola Discovery

Jurnal

Pengaruh Penggunaan Uap Kering Pada Proses Pirolisis Limbah Plastik

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 4 No. 3 (2019)

DOI
10.55679/enthalpy.v4i3.10003
ISSN
2502-8944
Published
2019-12-20
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Pyrolysis is a fascination process by increasing temperatures without or less oxygen. This research aims to compare the use of gas pressure and gas-burning temperatures that were hasyfish. In this study, the reabsorption of 500 gr in the druse variable of the interactive waste is the type of PET (Polyethylene) with two types of the pyrolysation of the pyrolysis without being dry and the pyrolysis is with the athletes. Research began in preparation for the preparation of the test, preparation of ryl, precursors and research with gas pyrolysis. Further conducted analysis for each product. The highest gas pressure has a pyrolysation trial with an average of 0,04125 MPa while for the pyrolysis, without either a 0,02375 MPa while the average gas of the highest gas air date on the test pyrolysis without a dry temperature at 971,5 °C whereas the water is called for the water of the process of the 962,75 °C.Keywords: Pyrolysis, plastic garbage, gas, and dry steam

Collaboration network of the authors

40 authors · 244 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo16
Prinob AksarUniversitas Halu Oleo15
Lukas Kano MangallaUniversitas Halu Oleo14
Abd KadirUniversitas Halu Oleo14
Yuspian GunawanAffiliation unknown13
Al Ichlas ImranAffiliation unknown10
Salimin SaliminAffiliation unknown9
La HasanudinUniversitas Halu Oleo9
Kadir KadirAffiliation unknown8
Ridway BalakaAffiliation unknown8
Sudarsono SudarsonoAffiliation unknown8
La HasanuddinAffiliation unknown5
Muhammad HasbiUniversitas Syiah Kuala5
Raden Rinova SisworoUniversitas Halu Oleo4
La Ode Ahmad BarataAffiliation unknown4
Nanang EndriatnoAffiliation unknown4
Jaka Seru Dwi SaputraAffiliation unknown4
R BalakaAffiliation unknown2
Agustinus LolokAffiliation unknown2
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
Luther PagillingAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Asad SyahdanAffiliation unknown1
Sartirlan AliAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
P AksarAffiliation unknown1
C YusnidarsyahAffiliation unknown1
Asar AsarAffiliation unknown1
Esparuling EsparulingAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengaruh Penggunaan Uap Kering Pada Proses Pirolisis Limbah Plastik</dc:title>
	<dc:creator>R.Y.P, Lalu Junaedi</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:description xml:lang="en-US">Pyrolysis is a fascination process by increasing temperatures without or less oxygen. This research aims to compare the use of gas pressure and gas-burning temperatures that were hasyfish. In this study, the reabsorption of 500 gr in the druse variable of the interactive waste is the type of PET (Polyethylene) with two types of the pyrolysation of the pyrolysis without being dry and the pyrolysis is with the athletes. Research began in preparation for the preparation of the test, preparation of ryl, precursors and research with gas pyrolysis. Further conducted analysis for each product. The highest gas pressure has a pyrolysation trial with an average of 0,04125 MPa while for the pyrolysis, without either a 0,02375 MPa while the average gas of the highest gas air date on the test pyrolysis without a dry temperature at 971,5 °C whereas the water is called for the water of the process of the 962,75 °C.Keywords: Pyrolysis, plastic garbage, gas, and dry steam</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10003</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v4i3.10003</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 4, No 3 (2019): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v4i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10003/7147</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>