Melola Discovery

← Melola Discovery

Jurnal

Pengujian Sifat Fisik dan Mekanik Pada Komposit Papan Partikel Berbahan Dasar Limbah Serbuk Kayu, Serbuk Ban Bekas dan Resin Polyester

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 7 No. 2 (2022) · pp. 51–56

DOI
10.55679/enthalpy.v7i2.24807
ISSN
2502-8944
Published
2022-05-31
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Particle board is a board made of wood particles or other particle materials bonded with organic or synthetic adhesives and with the help of one or more elements of heat, pressure, humidity, catalyst and others. particleboard composites made from sawdust, waste tire powder and polyester resin on Bending and Water Absorption Tests. Comparison of composite material composition of particleboard waste wood powder, waste tire powder and polyester resin, namely 30%: 20%: 50%, 40%: 10%: 50%, 45%: 5%: 50% and 50%: 0%: 50%. The test standard is based on SNI 03-2105-2006. The results showed that the greatest bending strength value was obtained at the composition of 50%: 0%: 50% of 186.223 Kgf/cm². and the largest water absorption value was obtained at the composition of 45%: 5%: 50% at 2.581%.Keywords: Bending, Water absorption, Particle board,,Wood powder, Used tire powder

Collaboration network of the authors

40 authors · 179 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Islam Negeri Mahmud Yunus Batusangkar
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown10
Samhuddin SamhuddinAffiliation unknown8
Yuspian GunawanAffiliation unknown5
La Ode Ahmad BarataAffiliation unknown4
Abd KadirUniversitas Halu Oleo4
Salimin SaliminAffiliation unknown4
La HasanudinUniversitas Halu Oleo3
Kadir KadirAffiliation unknown3
Ridway BalakaAffiliation unknown3
Al Ichlas ImranAffiliation unknown3
Prinob AksarUniversitas Halu Oleo2
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Aminur AminurUniversitas Halu Oleo1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
Luther PagillingAffiliation unknown1
La HasanuddinAffiliation unknown1
Asad SyahdanAffiliation unknown1
Minson SimatupangUniversitas Halu Oleo1
I Gusti R SadimantaraAffiliation unknown1
Fransiscus R SuramasAffiliation unknown1
Muhammad S SadimantaraAffiliation unknown1
Luther P PagilingAffiliation unknown1
Budiman S SudiaAffiliation unknown1
Jaka Seru Dwi SaputraAffiliation unknown1
Ade SaputraAffiliation unknown1
Irwan IrwanUniversitas Islam Negeri Mahmud Yunus Batusangkar1
Muhamad Rian TaufikAffiliation unknown1
Mufli MufliUniversitas Halu Oleo1
Kusmardin KusmardinAffiliation unknown1
Kadek LanaAffiliation unknown1
Harman SaidAffiliation unknown1
Ambo SakkaAffiliation unknown1
Sarifudin SarifudinAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengujian Sifat Fisik dan Mekanik Pada Komposit Papan Partikel Berbahan Dasar Limbah Serbuk Kayu, Serbuk Ban Bekas dan Resin Polyester</dc:title>
	<dc:creator>Anwar, Fardillah</dc:creator>
	<dc:creator>Mangalla, Lukas Kano</dc:creator>
	<dc:creator>Sisworo, Raden Rinova</dc:creator>
	<dc:description xml:lang="en-US">Particle board is a board made of wood particles or other particle materials bonded with organic or synthetic adhesives and with the help of one or more elements of heat, pressure, humidity, catalyst and others. particleboard composites made from sawdust, waste tire powder and polyester resin on Bending and Water Absorption Tests. Comparison of composite material composition of particleboard waste wood powder, waste tire powder and polyester resin, namely 30% : 20% : 50%, 40% : 10% : 50%, 45%: 5%: 50% and 50% : 0% : 50%. The test standard is based on SNI 03-2105-2006. The results showed that the greatest bending strength value was obtained at the composition of 50%: 0%: 50% of 186.223 Kgf/cm². and the largest water absorption value was obtained at the composition of 45%: 5%: 50% at 2.581%.Keywords: Bending, Water absorption, Particle board, ,Wood powder, Used tire powder</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-05-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/24807</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v7i2.24807</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 7, No 2 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 51-56</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v7i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/24807/15069</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>